Coda Audio LINUS14D 4X Channel Audio Amplifier 3500-Watt
The LINUS14D is a four channel DSP, network, comparator and amplifier delivering 4x 3500 W of clean power in a light weight 19”/2U package. The 4 audio inputs are selectable from analog, LiNET digital audio or DANTE audio network and are routable to any of the 4 outputs via the input matrix.
Features:
- Very high output power (4x 3500W @ 4 Ohm)
- SHARC floating point DSP @ 96 kHz
- DANTE and LiNET – 8x freely configurable digital audio signals over CAT5 cables
- 4 dynamic comparators for use with CODA Audio sensor controlled subwoofers
- LINUS Control Ethernet interface provides network control and monitoring of amplifiers
- Advanced IIR and linear-phase FIR filters
- Efficient Class D-IC design for superior sound performance
- Switch-mode power supply for 115 V / 230 V with automatic voltage selection
Specifications:
- Number of output channels: 4
- Output: stage Class D
- Internal samplerate / bit-depth: 96 kHz / 24 bit
- Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - analogue input):
- >108 dB (unweighted)
- >111 dB (A-weighted)
- Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - digital input):
- > 116 dB (unweighted)
- > 119 dB (A-weighted)
- Frequency response (8 Ω load, with CLEAR preset): 20 Hz–20 kHz = (+0.0 dB / -1.0 dB)
- THD+N & IMD (4 Ω load @ 1/2 output power): 20 Hz–20 kHz = < 0.005%
- Latency (input to loudspeaker output):
- min. 2.70 ms AES/EBU input
- min. 2.00 ms Analogue input
- Protection circuits: Inrush current limiter, Thermal limiter, Output DC, SMPS over-current, Output overload
- LED indicators: Mute status, Limit, Signal, Protection, Ethernet control active, Digital signal locked, DanteTM Power on
- Ethernet connection:
- 2x 100 Mbps RJ45 Control
- 1x 100 Mbps RJ45 DanteTM
- Dimensions (W x H x D): 483.5x88x454mm / 19x3.4x17.8”
- Shipping dimensions (W x H x D): 675x130x560 mm / 26.5x5.1x22”
- Net weight: 14.75 kg / 32.5 lbs.
- Shipping weight: 17.5 kg / 38.6 lbs.
- Number of output channels: 4
- Output: stage Class D
- Internal samplerate / bit-depth: 96 kHz / 24 bit
- Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - analogue input):
- >108 dB (unweighted)
- >111 dB (A-weighted)
- Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - digital input):
- > 116 dB (unweighted)
- > 119 dB (A-weighted)
- Frequency response (8 Ω load, with CLEAR preset): 20 Hz–20 kHz = (+0.0 dB / -1.0 dB)
- THD+N & IMD (4 Ω load @ 1/2 output power): 20 Hz–20 kHz = < 0.005%
- Latency (input to loudspeaker output):
- min. 2.70 ms AES/EBU input
- min. 2.00 ms Analogue input
- Protection circuits: Inrush current limiter, Thermal limiter, Output DC, SMPS over-current, Output overload
- LED indicators: Mute status, Limit, Signal, Protection, Ethernet control active, Digital signal locked, DanteTM Power on
- Ethernet connection:
- 2x 100 Mbps RJ45 Control
- 1x 100 Mbps RJ45 DanteTM
- Dimensions (W x H x D): 483.5x88x454mm / 19x3.4x17.8”
- Shipping dimensions (W x H x D): 675x130x560 mm / 26.5x5.1x22”
- Net weight: 14.75 kg / 32.5 lbs.
- Shipping weight: 17.5 kg / 38.6 lbs.