Clear-Com HMS-4X 4-Channel 1RU Digital Main Station

Clear-Com HMS-4X 4-Channel 1RU Digital Main Station

Seamless LinkingLink main stations together using LAN, fiber, 2-wire or 4-wire without the need for active splitter devices. Once linked, auto-discovery detects and configures linked devices so that any beltpack has access to active intercom channels.

Configuration Made SimpleThe free, browser-based Core Configuration Manager (CCM) tool provides the same functionality as the main station menus and is supported by all major browsers on MAC, PC and tablet platforms.

Easily Expand SystemWith an optional channel expansion license, a single main station’s channel capacity increases to 24 available channels. Add up to 24 ports per main station by connecting to LQ Series devices.

Single Cable OperationAll networked intercom channels and power for beltpacks or a combination of user devices can be transmitted over a single shielded twisted-pair cable (mic cable for powerline, CAT5/6 for Power-over-Ethernet).

Features:

• 4-Channel 1RU Digital Main Station
• Up to 72 beltpacks supported on one system (DPL + IP)
• Add up to 24 ports of audio I/O per Main Station by connecting to LQ Series
• Up to 3 main stations and 3 LQ-R Series devices can be linked over LAN and WAN
• Quickly connect Agent-IC mobile clients with existing HelixNet users via LQ Series
• SIP/VoIP calling from HelixNet via LQ Series
• Core Configuration Manager (CCM) browser-based tool (with software v3.0 or higher)
• Plug-and-go installation with hardwire auto-discovery
• USB-A and USB Micro-AB ports
• Built-in expansion ports for optional interface modules (Ethernet, Fiber, 2-wire, 4-wire)
• Program input
• Remote Mic Kill on all connected devices
• Speaker and Program controls
• GPIO-DB-25 (4 Opto-Iso GPI, 4 GPO Relays)

Specifications:

Linking

• Up to three Main Stations may be linked using any combination of HLI-ET2 Ethernet or HLI-FBS Fiber modules.
• Up to 3 LQ-R Series devices can be linked using the HLI-ET2 module. All linking is via IP over LAN/WAN connections.

Channels

• 12 or 24 intercom channels. One local and any networked program audio feeds (Assignable to intercom channels)

Connectors

• Intercom Line: (2) 3-pin XLR–M, (2) 3-pin XLR–F
• Headset: 4-pin XLR–M
• USB: Type A & Micro AB
• Program: 3-pin XLR–F
• SA (Stage Announce): 3-pin XLR–M
• Hot Mic/IFB Interface: 1/4" (0.64cm) phone jack
• GPI: 25 way D-type female (4 Opto-Iso GPI, 4 GPO Relays)

Microphone Pre-amplifier

• Headset Mic Impedance: 200? (Dynamic)
• Headset Mic Voltage: 1.7V (Electret selectable)
• Limiter: +23dB
• The following is specified for a route to four-wire output at 0dBu out:
• Mic Gain: 60dB (Dynamic), 45dB (Electret)
• Frequency Response: 200Hz – 10kHz ±3dB
• Contoured for Intelligibility Distortion: <0.2% THD @ 1kHz
• Noise:

  Headphone Amplifier

• Load Impedance: >32?
• Output Level: +12dBu before clipping
• Sidetone: -12dBu (selectable)
• The following is specified for a route from a four-wire input at 0dBu in:
• Max Gain: 0dB
• Frequency Response: 40Hz – 10kHz ±3dB
• Distortion: <0.1% THD @ 1kHz
• Noise:
• Headphone Limiter: 0dBu (selectable)

Loudspeaker Amplifier

• Load Impedance: 8?
• Output Level: +18dBu before clipping
• The following is specified for a route from a four-wire input at 0dBu in:
• Max Gain: 18dB
• Frequency Response: 200Hz – 10kHz ±3dB
• Distortion: <0.1% THD @ 1kHz
• Noise:

  Program Line Input

• Maximum Level Before Clipping: +18dBu
• Nominal Input Level: 0dBu (selectable)
• Input Impedance: >= 10K?
• The following is specified for a route to four-wire output at 0dBu out:
• Frequency Response: 20Hz – 10kHz ±3dB
• Distortion: <0.2% THD @ 1kHz
• Noise:

  Stage Announce Input

• Maximum Level Before Clipping: +18dBu
• Nominal Output Level: 0dBu (selectable)
• Output Impedance: <= 100?
• The following is specified for a route from a dynamic headset:
• Frequency Response: 300Hz – 12kHz ±3dB
• Distortion: <0.1% THD @ 1kHz
• Noise:

  Hot Mic Input

• Maximum Level Before Clipping: +12dBu
• Nominal Output Level: 0dBu (selectable)
• Output Impedance: <= 100?
• The following is specified for a route from a dynamic headset:
• Frequency Response: 300Hz – 12kHz ±3dB
• Distortion: <0.2% THD @ 1kHz
• Noise:

  Main Power

• Input Voltage Range: 100 – 240VAC
• Input Frequency Range: 50 – 60Hz
• Input Power: <= 250VAC
• Output Voltage: +/-29VDC ± 1V
• Output Currentper Channel: 1.5A (continuous)
• Power Connector: IEC60320-1-C14

Environmental

• 32º – +104ºF (0 – +40ºC)
• 90% relative humidity

Dimensions

• 1.75 x 19 x 13 in (HxWxD)
• (44 x 483 x 320 mm)

Weight

• 5.83 lbs. (2.65 kg)