Audio Technica AT4900B-48 Mic Body Subassembly
This versatile modular microphones may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to- capture instruments.
The AT4900b-48 is a body only. You need to choose interchangeable capsule available in cardioid (AT4051b-EL), omni (AT4049b-EL) and hypercardioid (AT4053b-EL).
Features:
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- Omnidirectional polar pattern provides maximum ambient pickup
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards
Specifications:
- Element: Externally polarized (DC bias) condenser
- Low Frequency Roll Off: 80 Hz, 18 dB/octave
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Phantom Power Requirements: 48V DC, 4.8 mA typical
- Weight: 130g
- Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
- Element: Externally polarized (DC bias) condenser
- Low Frequency Roll Off: 80 Hz, 18 dB/octave
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Phantom Power Requirements: 48V DC, 4.8 mA typical
- Weight: 130g
- Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
