Audio-Technica AT2035PK Streaming / Podcasting Pack

The AT2035PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2035 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.

The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is threaded internally with an XLR cable for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement.

The rugged AT2035 side-address studio condenser microphone delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. The mic comes with an AT8458 shock mount to attenuate any noise, shock or vibration that’s transmitted through boom. Its analog XLR output connects easily to a digital converter or mixer.

Rounding out the pack are the ATH-M20x pro headphones, part of Audio-Technica’s critically acclaimed M-Series line. With 40 mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions.

Features:

• AT2035 Cardioid Condenser Microphone
  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• ATH-M20x Professional Monitor Headphones
  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced low-frequency performance
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
  • Convenient single-side cable exit
• Adjustable Studio Boom Arm
• Full 360° rotation
• Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
• Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
• Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
• Internal cable management for clean desk appearance

Specifications:

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range: 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 403 g (14.2 oz)
• Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio-Technica Case Style: R5
• Notes: ATH-M20x Headphones Specifications
  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: Copper-clad aluminum wire
  • Frequency Response: 15 – 20,000 Hz
  • Maximum Input Power: 700 mW at 1 kHz
  • Sensitivity: 96 dB
  • Impedance: 47 ohms
  • Weight: 190 g (6.7 oz), without cable and connector
  • Cable: 3.0 m (9.8'), straight, left-side exit
  • Accessories Included: 6.3 mm (1/4") snap-on adapter