Audio-Technica AT2020PK Streaming / Podcasting Pack with AT2020 Microphone / Headphones / Boom-Arm
The AT2020PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2020 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.
Features:
- AT2020 Cardioid Condenser Microphone:
- The price/performance standard in side-address studio condenser microphone technology
- Ideal for vocal pickup
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
- ATH-M20x Professional Monitor Headphones:
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Adjustable Studio Boom Arm:
- Full 360° rotation
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
- Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
- Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
- Internal cable management for clean desk appearance
Specifications:
- Microphones:
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 20-20,000 Hz
- Open Circuit Sensitivity -37 dB (14.1 mV) re 1V at 1 Pa
- Maximum Input Sound Level 144 dB SPL, 1 kHz at 1% T.H.D.
- Noise 20 dB SPL
- Dynamic Range 124 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio 74 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 48V DC, 2 mA typical
- Weight 345 g (12.1 oz)
- Dimensions 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
- Output Connector Integral 3-pin XLRM-type
- Accessories Included Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style R7
- ATH-M20x Headphones Specifications:
- Type: Closed-back dynamic Driver
- Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 – 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessories Included: 6.3 mm (1/4") snap-on adapter
- The price/performance standard in side-address studio condenser microphone technology
- Ideal for vocal pickup
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Full 360° rotation
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
- Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
- Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
- Internal cable management for clean desk appearance
- Microphones:
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 20-20,000 Hz
- Open Circuit Sensitivity -37 dB (14.1 mV) re 1V at 1 Pa
- Maximum Input Sound Level 144 dB SPL, 1 kHz at 1% T.H.D.
- Noise 20 dB SPL
- Dynamic Range 124 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio 74 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 48V DC, 2 mA typical
- Weight 345 g (12.1 oz)
- Dimensions 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
- Output Connector Integral 3-pin XLRM-type
- Accessories Included Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style R7
- ATH-M20x Headphones Specifications:
- Type: Closed-back dynamic Driver
- Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 – 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessories Included: 6.3 mm (1/4") snap-on adapter
