Shure ANI22-XLR 2 Channel In/2 Channel Out XLR Audio Network Interface with Dante

Audio network interface allows 2 analog mic or line inputs and 2 analog outputs to connect to a Dante network for easy audio routing and convenient browser-based remote control. Audio network interface complements the existing ANI4IN and ANI4OUT products.

Features:

• Converts up to 2 mic/line analog signals onto a Dante Network
• Converts up to 2 Dante digital audio signals to line/mic analog signals, ANI22XLR: Analog audio XLR connectors (2 in, 2 out)
• Power-over-Ethernet (PoE) eliminates need for outboard power supply
• Compact form factor is easy to mount without equipment rack

Specifications:

• Inputs (Analog): 2 x 3-pin XLR connectors
• Outputs (Analog): 2 x 3-pin XLR connectors
• Dante Connection:
  • 1 x RJ45
  • Channel Count: 2 inputs, 2 outputs
• Polarity: Non-inverting, any input to any output
• Power Requirements: Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
• Power Consumption: 11 W maximum
• Application Control: HTML5
• Operating Temperature Range: 20 to 104°F (-6.7 to 40°C)
• Storage Temperature Range: 20 to 165°F (-29 to 74°C)
• Thermal Dissipation:
  • Maximum: 12.1 W (41.3 BTU/hr)
  • Typical: 9.8 W (33.7 BTU/hr)
• Audio:
  • Frequency Response: 20 Hz to 20 kHz ±1 dB
  • Dante Audio Flows: Sampling Rate: 24-bit/48 kHz
  • Latency:
    • Does not include Dante latency
    • Analog to Dante: 0.35 ms
    • Dante to Analog: 0.71 ms
  • Analog Gain Range: 51 dB (adjustable in 3 dB steps)
  • Dynamic Range: 113 dB, 20 Hz to 20 kHz, A-weighted, typical
  • Equivalent Input Noise:
    • 20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
    • Analog Gain Setting = +0 dB, -93 dBV
    • Analog Gain Setting = +27 dB, -119 dBV
    • Analog Gain Settings = +51 dB, -130 dBV
  • Total Harmonic Distortion (THD): @ 1 kHz, 0 dBV Input, 0 dB analog gain <0.05%
  • Common Mode Rejection Ratio: >70 dB, 50 Ohms balanced source @ 1 kHz
  • Input Impedance: 5 kOhms
  • Output Impedance: 150 Ohms
  • Input Clipping Level:
    • Analog Gain Setting = +0 dB, +20 dBV
    • Analog Gain Setting = +27 dB, -7 dBV
    • Analog Gain Setting = +51 dB, -31 dBV
  • Analog Output Levels:
    • Selectable Line 0 dB
    • Aux -20 dB
    • Mic -46 dB
  • Digital Signal Processing (DSP):
    • Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range)
    • System: Channel Summing
• Networking: Cat 5e or higher (shielded cable recommended)
• Dimensions (H x W x D): 1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)
• Weight: 1.5 lb (672 g)