Rode SVMX Broadcast-Grade Stereo On-Camera Microphone

For capturing audio the Stereo VideoMic X by RODE Microphones offers professional quality. It can be used as an on-camera mic in various environments, for applications such as interviews, weddings, sports and nature shoots, and more. It features a matched pair of 1/2" condenser capsules configured in a stacked X-Y configuration with cardioid polar patterns, a 40 Hz to 20 kHz frequency response, and 9V battery or 48V phantom power. It is built with a balanced mini XLR (TA3F) output connector, and an unbalanced 1/8" output stereo mini jack plug. The Stereo VideoMic X can deliver professional-grade audio and gets the job done when capturing audio in various environments. The VideoMic features digital switching on the rear that allows the user to control level adjustment, high-pass filter, and high-frequency boost to increase intelligibility of dialogue. The enclosure is constructed of a lightweight aluminum, and, inside the enclosure, the capsules are supported by the Rycote Lyre shock-mounting system, providing isolation from vibration as well as knocks and bumps. In addition, a pop shield and wind shield is included.

Features:

• Acoustically matched true condenser capsules
• Rycote Lyre onboard shock mounting to isolate from knocks and bumps
• Balanced professional XLR outputs, and unbalanced 1/8" stereo mini-jack outputs are provided
• Rugged metal construction insures durability
• Three step high-pass filter (0, 75 Hz, 150 Hz)
• Three position level control (-10dB, 0dB, +20dB)
• High frequency boost (+6dB)
• LED power on/low battery indicator
• 10 Year Warranty* (Note: *Online registration required)

Specifications:

• Form Factor: Camera-Mount / Stand/Boom Mount
• Sound Field: Stereo
• Stereo/Surround Configuration: X/Y
• Operating Principle: Pressure Gradient
• Capsule: 2 x Condenser
• Diaphragm: 0.5" / 12.7 mm
• Polar Pattern: Cardioid
• Orientation: End Address
• Circuitry: Solid-State
• Pad: None
• High-Pass Filter:
  • 75 Hz
  • 150 Hz
• Tone Adjustment:
  • High Boost: +6 dB at 3 kHz
• Gain Adjustment: -10 dB to +20 dB
• Indicators:
  • 1 x Single LED (Power, Status)
  • 8 x Single LED (Status)
• On-Board Controls: Gain/Sensitivity, High-Pass Filter, HF, On/Off
• Windscreen: Foam, Windsock/Windjammer (Included)
• Performance:
  • Frequency Range: 40 Hz to 20 kHz
  • Maximum SPL: 143 dB SPL
  • Off-Axis Rejection:
    • 3 dB at 60°
    • 10 dB at 120°
    • 22 dB at 180°
  • Impedance: 200 Ohms
  • Sensitivity: -32 dBV/Pa at 1 kHz
  • Dynamic Range: 131 dB
  • Signal-to-Noise Ratio: 82 dB A-Weighted
  • Equivalent Noise Level: 12 dB A-Weighted
• Connectivity:
  • Output Connectors (Analog):
    • 2 x TA3F 3-Pin Female (on Mic)
    • 1 x 1/8" / 3.5 mm TRS Female (on Mic)
  • Headphone Connector: None
  • Cable Length: 6.7 to 15.7" / 17 to 40 cm (Coiled)
• Power:
  • Operating Voltage:
    • 48 V (Phantom Power)
    • 9 V (Battery Power)
  • Battery Type: 1 x 9 V
  • Approximate Battery Life: 30 Hours
• Physical:
  • Mounting: Camera/Shoe-Mount (via Integrated Hardware)
  • Mounting Thread Size: 3/8"-16 Female
  • Construction Material: Aluminum
  • Dimensions: H: 3.9 x W: 4 x L: 4.6" / H: 10 x W: 10.2 x L: 11.8 cm
  • Weight: 10.6 oz / 300 g (Microphone)
• Packaging Info:
  • Package Weight: 3.07 lb
  • Box Dimensions (LxWxH): 9.3 x 8.9 x 5"