L-Acoustics LA7-16I-US Install Amplified Controller - 16x 1300 Watt at 8 Ohms - US Version

More L-Acoustics products

Write a review Q&A SKU: LA7-16I-US Solotech ID#: 129271
1 of 3
Get a quote

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

L-Acoustics LA7-16I-US Install Amplified Controller - 16x 1300 Watt at 8 Ohms - US Version

LA7.16i is a 16-channel amplified controller dedicated to permanent installations. It integrates L-SMART power management technology to dynamically match the real-time needs of the loudspeaker system being driven. LA7.16i is efficiently dimensioned for multichannel applications, distributed systems, or line sources for the finest discretization.

Its streamlined and elegant 2U chassis hides a powerful DSP engine with features for loudspeaker management, system protection, and monitoring as well as a comprehensive set of tools for system adjustment and calibration. The Milan-compliant LA7.16i supports AVB inputs with seamless network redundancy, in addition to AES/EBU and analog connections. Three GPIO and a 24 V DC backup power for the DSP card offer external control and increased reliability.

SPECIFICATIONS

  • Amplification and power supply
    • Output power, all channels loaded
      • Peak output power 12 dB Crest Factor, sine burst, 1 kHz, 2 ms
        • 16 channels at 4 Ω: 1100 W
        • 16 channels at 8 Ω: 1300 W
        • 16 channels at 16 Ω: 700 W
      • Output power, CEA-2006 / 490A, sine burst, 1 kHz, 20 ms, < 1 % THD
        • 16 channels at 4 Ω: 1000 W
        • 16 channels at 8 Ω: 920 W
        • 16 channels at 16 Ω: 580 W
    • Amplification class
      • High efficiency class D
    • Power supply model
      • Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
    • External DSP backup voltage input
      • 24 V DC (+/- 15%) 0.8 A
    • Mains rating
      • 100 V - 240 V ~ ±10%, 50-60 Hz
  • Audio specifications
    • Frequency response (20 Hz - 20 kHz, 8 Ω load, 60 W output power
      • ± 0.05 dB
    • Distortion THD+N (20 Hz - 20 kHz, 8 Ω load, 60 W output power)
      • < 0.1%
    • Output dynamic range (20 Hz - 20 kHz, 8 Ω, A-weighted, Digital input)
      • > 119 dB
    • Noise level (20 Hz - 20 kHz, 8 Ω, A-weighted, Digital input)
      • < - 79 dBV
  • DSP
    • Digital Signal Processor (DSP)
      • Gen.5 Dual SHARC 32-bit, floating point, 96 kHz sampling rate
    • I/O routing
      • 16 x 16 routing and summation matrix
    • Per output channel
      • Built-in EQ station with 8 IIR, 4 FIR EQ filters
      • Array morphing (LF contour, zoom factor), Air absorption compensation filters
      • Internal IIR and FIR EQ algorithms for speaker phase linearization and improved impulse responses
      • Output delay from 0 to 1000 ms
  • Technologies
    • Loudspeaker Management
      • L-DRIVE advanced system protection (excursion, temperature and over-voltage)
    • Power Management
      • L-SMART adaptive power management
  • Circuits protection
    • Mains and power supply
      • Over and under voltage / over temperature / overcurrent / inrush current protection
    • Power outputs
      • Over current limiting / DC / short circuit / over temperature
  • Inputs / Outputs
    • AVB input with support of Milan seamless dual networking
      • 16 channels 48kHz / 96 kHz from 16 streams of up to 8 channels
    • Alternative network protocols
      • AES67 - ready (with a future firmware update)
    • AES/EBU input (shared connectors with Analog)
      • 2 channels (1 x AES/EBU, 44.1 - 192 kHz sampling rate) With active link and bypass relay
    • Analog input (shared connectors with AES/EBU)
      • 1 channel, link output
    • Loudspeaker output
      • 8 female 4-point terminal blocks
  • Control and monitoring
    • Network connection
      • Dual-port Ethernet Gigabit interface etherCONTM I/O
    • General Purpose Inputs / Outputs (GPIO)
      • 3 GPIO, isolated optocoupler inputs, isolated relays contacts
    • Third-party control solutions
      • Q-SYS® / Crestron®
  • Operating conditions
    • Temperature
      • Room temperature from -5º C / 23º F to +50º C / 122º F
  • Physical data
    • Dimensions W x H x D
      • 483 x 88 (2U) x 411 mm / 19 x 3.5 (2U) x 16.2 in
    • Weight
      • 14.5 kg / 32 lb

Reviews

Write a review

Score

Questions & Answers

Ask a question