JBL PD5122 Dual 12-inch Low-Frequency Loudspeake

More JBL Pro products

Write a review Q&A SKU: PD5122 Solotech ID#: 63393
1 of 1
Get a quote

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

JBL PD5122 Dual 12-inch Low-Frequency Loudspeaker

The PD5122 is intended for use as a flown or ground supported, high power low frequency module used in conjunction with mid/high-only or fullrange systems of the PD5000 series.

Features:

  • Dual high power 300 mm (12 in) low frequency drivers.
  • Designed to extend LF pattern control of PD6322 systems.
  • Slot-loaded configuartion duplicates LF performance of PD6322.

Specifications:

  • Frequency Range: 41 Hz to 1 kHz (-10 dB)
  • Frequency Response: 49 Hz to 300 Hz ( ± 3 dB)
  • Transducer Power Rating (AES): 1600W (6400 W peak) 2 hrs
  • Long-Term System Power Rating (IEC): P1200 W (4800 W peak), 100 hrs
  • Maximum SPL: 128 dB-SPL cont avg (134 peak)
  • Input Modes: Drivers Parallel / Drivers Discrete
  • Nominal Impedance: 4 ohms in parallel-drive mode
  • Sensitivity(1W , 1m): 116 dB-SPL
  • Low Frequency Driver: 2 x JBL 2206H 300 mm (12 in) VGC drivers with 100 mm (4 in) voice coil with minimal power compression and low distortion
  • Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply
  • Sensitivity (1W , 1m): 109 dB-SPL14 dB-SPL
  • Waveguides: MF: PT-N64MF 600 x 600 mm (24 x 24 in) HF: PT-H64HF 300 x 300 mm (12 x 12 in)
  • Enclosure: Trapezoidal with 15 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood.
  • Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).
  • Finish: Black DuraFlex™ finish. White (-WH) available upon request.
  • Optional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments.
  • Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)
  • Input Connectors: Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.
  • Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX.
  • Dimensions (H x W x D in vertical orientation): 357 x 673 x 706 mm (14.1 x 26.5 x 27.8 in)
  • Net Weight: 36.4 kg (80 lb)
  • Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts

Reviews

Write a review

Score

Questions & Answers

Ask a question