JBL ASB6112-WH Single 12-Inch Subwoofer - White
The ASB6112 is a high-power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2263H Differential Drive® dual-coil dual-gap 12" woofer. This woofer features a neodymium magnet and an ultra-robust cone for extended durability.
Features:
- 2263H 12" Differential Drive® dual voice coil dual gap, neodymium magnet transducer
- 1000 watts continuous pink noise, 4000 watts peak power handling capacity
- Large vent area for high output with low distortion
- FIR Tuning Set Matches Phase Profile to Full-Range Models
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
Specifications:
- Frequency Range (-10 dB): 35 Hz – 1 kHz
- Frequency Response (±3 dB): 43 Hz – 1 kHz
- Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
- System Power Rating: 700 W (2800 W peak), 100 hrs
- Maximum SPL (1m): 40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak)
- System Sensitivity: 40 Hz - 300 Hz: 96 dB-SPL, 1W (2.83V) @ 1m
- Nominal Impedance: 8 ohms
- LF Driver: 1 x 2263H, 305 mm (12 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
- Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
- Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
- Finish: White
- Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
- Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through
- Environmental: Mil-Std 810; IP-x3 per IEC529
- Dimensions (H x W x D in vertical orientation): 406 x 369 x 483 mm (16.0 x 14.5 x 19.0 in)
- Net Weight (each): 16.3 kg (36.0 lb)
- Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
- Nominal LF Driver Impedance: 8 ohms
- Frequency Range (-10 dB): 35 Hz – 1 kHz
- Frequency Response (±3 dB): 43 Hz – 1 kHz
- Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
- System Power Rating: 700 W (2800 W peak), 100 hrs
- Maximum SPL (1m): 40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak)
- System Sensitivity: 40 Hz - 300 Hz: 96 dB-SPL, 1W (2.83V) @ 1m
- Nominal Impedance: 8 ohms
- LF Driver: 1 x 2263H, 305 mm (12 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
- Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
- Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
- Finish: White
- Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
- Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through
- Environmental: Mil-Std 810; IP-x3 per IEC529
- Dimensions (H x W x D in vertical orientation): 406 x 369 x 483 mm (16.0 x 14.5 x 19.0 in)
- Net Weight (each): 16.3 kg (36.0 lb)
- Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
- Nominal LF Driver Impedance: 8 ohms
