Focusrite iTrack Solo Lightning Audio Interface
iTrack Solo provides the best solution for recording your instruments and vocals using an iPad and is a certified "Made for iPad" device. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology iTrack Solo captures your sound with pristine quality. Simply plug in and press record. iTrack is also fully compatible with your Mac or PC. iTrack Solo’s input section features a clean, low-noise, low-distortion preamp, which is also found in our Liquid Safire 56. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you can record both vocals and your instrument simultaneously to separate tracks in your software. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Unique halo signal indicators let you know that you've got a good volume for recording. A large monitor dial provides a tactile control for the volume of your speakers and headphones, while a high quality headphone amp provides a clean yet loud signal to headphones connected to the front panel socket. The direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs so you hear the incoming signal with no latency from your music app. On the rear panel you will find phono outputs allowing you to connect iTrack Solo to a pair of powered speakers, or to your home Hi-Fi system. The speaker volume can then be controlled using the large dial on the front of iTrack Solo meaning everything you need is within reach.
Specifications:
- FRONT PANEL
- 1 microphone input - XLR
- 1 Instrument input ¼’ unbalanced
- 2 Gain knobs
- 2 Gain halo signal indicators
- 48V Phantom power switch
- Direct monitor switch
- Large monitor level dial (controls headphone and line level outputs)
- USB Connection LED indicator
- Headphone output ¼’ TRS Jack
- REAR PANEL
- 2 unbalanced monitor outputs - RCA Phono
- DEVICE LINK port (to connect iTrack Solo to iPad)
- USB 2.0 Port
- Kensington Lock slot
- INCLUDED SOFTWARE
- Ableton Live Lite 9 - professional music making software to use your iTrack Solo with a Mac or PC.
- Focusrite Scarlett plug-in suite - collection of software plug-ins bringing effects to your music software (like Ableton Live for example).
- MIC ANALOGUE INPUT PERFORMANCE
- Frequency Response: 20Hz - 20kHz +/- 0.2 dB
- THD+N: < 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Equivalent Input Noise (EIN): < -120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter)
- Gain Range: +10dB to +55dB
- Max Input Level: +4dBu
- INSTRUMENT
- Frequency Response: 20Hz - 20kHz +/- 0.2dB
- THD+N: 0.003% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
- Noise: -87dBu (22Hz/22kHz bandpass filter)
- Gain Range: -10dB to +55dB
- Max Input Level: +2dBu
- ANALOGUE OUTPUT PERFORMANCE
- Nominal Output Level: 0dBFS = 10dBu, unbalanced
- Frequency Response: 20Hz - 20kHz +/- 0.2dB
- THD+N: < 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
- DIGITAL PERFORMANCE
- Clock sources: Internal clock only
- A-D Dynamic Range: 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB
- D-A Dynamic Range: 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
- Supported sample rates:
- 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz - Mac and PC
- 44.1 KHz, 48 KHz - iPad
- CROSSTALK
- Input to Input: Better than 90dB
- Output to Output: Better than 90dB
- Input to Output: Better than 85dB
- INPUT METERING
- Ring LED lit Green Signal present (-24 dBFS)
- Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second
- WEIGHT AND DIMENSIONS
- Height: 45 mm / 1.77'
- Width: 150 mm / 6'
- Depth: 100 mm / 4'
- Weight: 500 g / 1 lb.
- 1 microphone input - XLR
- 1 Instrument input ¼’ unbalanced
- 2 Gain knobs
- 2 Gain halo signal indicators
- 48V Phantom power switch
- Direct monitor switch
- Large monitor level dial (controls headphone and line level outputs)
- USB Connection LED indicator
- Headphone output ¼’ TRS Jack
- 2 unbalanced monitor outputs - RCA Phono
- DEVICE LINK port (to connect iTrack Solo to iPad)
- USB 2.0 Port
- Kensington Lock slot
- Ableton Live Lite 9 - professional music making software to use your iTrack Solo with a Mac or PC.
- Focusrite Scarlett plug-in suite - collection of software plug-ins bringing effects to your music software (like Ableton Live for example).
- Frequency Response: 20Hz - 20kHz +/- 0.2 dB
- THD+N: < 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Equivalent Input Noise (EIN): < -120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter)
- Gain Range: +10dB to +55dB
- Max Input Level: +4dBu
- 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz - Mac and PC
- 44.1 KHz, 48 KHz - iPad
- Input to Input: Better than 90dB
- Output to Output: Better than 90dB
- Input to Output: Better than 85dB
- Ring LED lit Green Signal present (-24 dBFS)
- Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second
- Height: 45 mm / 1.77'
- Width: 150 mm / 6'
- Depth: 100 mm / 4'
- Weight: 500 g / 1 lb.