ETC Source 4WRD II Daylight Gallery Retrofit Kit - Black
Source 4WRD II (Watt Reduction Device) LED is a replacement for a standard Source Four burner assembly that converts the HPL source to a white-light LED and provides a significant reduction in power consumption. The simple and quick upgrade is nondestructive and takes less than a minute. In most cases it can even be done without breaking the fixture’s focus. Source 4WRD II LED is theatrically dimmable via DMX or line dimmable, with a traditional LED curve, to allow flexibility for your installation. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements.
APPLICATIONS
- Energy saving retrofits
- Houses of worship
- Universities and schools
- Hospitality
- Retail
- Exhibition centers
- Meeting rooms
- Clubs
- Theatres
PRODUCT SPECIFICATIONS
- Source
- LED details
S4WRD II LED
- Max lumens (3200 K / 3200 K Gallery / Daylight Gallery)
- 11,430 / 9,716 / 10,333
- Lumens per watt (3200 K / 3200 K Gallery / Daylight Gallery)
- 120 V: 76.2 / 64.8 / 68.9
- 230 V: 65.3 / 55.5 / 59.0
- L70 rating (hours to 70% output)
- >45,000 hours
- Color
- Colors used
- Warm or Cool White
- Color temperature range
- 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
- Calibrated array
- N/A
- Red shift
- No
- Optical
- Field angle range
- Swappable lens tubes between 5–90 degrees
- Gate size
- 79 mm
- Aperture size
- Lens dependent
- Pattern projection
- Yes
- Pattern size
- A or B (see manual)
- Camera flicker control/Hz range
- No, not PWM dimmed
- Control
- Input method
- DMX Control or Line Dimmed
- Protocols
- DMX / RDM via RJ45
- Modes (Footprint)
- 1 Channel (Intensity) for DMX
- RDM configuration
- Yes
- UI type
- 7-segment address display, local level control via UI
- Local control
- Yes
- Onboard presets
- No
- Onboard sequences
- No
- Onboard effects
- No
- Fixture to fixture control
- No
- Electrical
- Voltage range
- 114–125 V, 60 Hz (120 V)
- 209–252 V, 50/60 Hz (230 V)
- Input method
- Hardwired, 1 m cord, bare end or various connector options (120 V)
- Hardwired, 1 m cord, bare end (230 V)
- Inrush
- 30 A (first half-cycle) at 120 V
- 12 A (first half-cycle) at 230 V
- Fixtures per circuit
- 120 V: 14 (20 A switched circuit, R20 module or similar)
- 230 V: 6 fixtures per non-dimmed circuit (ER15AFR module)
- Wattage (Typical/Standby)
- 150 W / 1.2 W (120 V)
- 175 W / 3.7 W (230 V)
- Current draw
- 1.26 A at 120 V
- 0.75 A at 230 V
- Notes
- - When using line dimming, see the S4WRD manual for dimmer setup.
- - When using line dimming, standby power is 0 W.C96
- Thermal
- Ambient operating temp
- 5°–50° C (41°–122° F)
- Fan (controllable)
- Yes (no)
- Droop compensation
- No
- dB range
- 28 dBa (average at 1 m)
- BTUs/hour
- 529 (120 V)
- 597 (230 V)
- Physical
- Materials
- Die-cast aluminum
- Color
- Black
- Mounting options
- Yoke
- IP rating
- IP-20, indoor only
- Weight
- 3.73 lb (1.69 kg) (Retrofit only)
- Included accessories
- Source 4WRD mounting post
- Warranty
- Fixture
- Five years
- LED array
- Ten years
- Regulatory and Compliance
- Approved regulatory standards
- UL 1573 (complete luminaire)
UL 1598C (retrofit kit)
- CSA C22.2 No. 166 (complete luminaire)
CSA TIL B79-A (retrofit kit)
- CE Compliant
- Source
- LED details
- Max lumens (3200 K / 3200 K Gallery / Daylight Gallery)
- 11,430 / 9,716 / 10,333
- Lumens per watt (3200 K / 3200 K Gallery / Daylight Gallery)
- 120 V: 76.2 / 64.8 / 68.9
- 230 V: 65.3 / 55.5 / 59.0
- L70 rating (hours to 70% output)
- >45,000 hours
- Color
- Colors used
- Warm or Cool White
- Color temperature range
- 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
- Calibrated array
- N/A
- Red shift
- No
- Optical
- Field angle range
- Swappable lens tubes between 5–90 degrees
- Gate size
- 79 mm
- Aperture size
- Lens dependent
- Pattern projection
- Yes
- Pattern size
- A or B (see manual)
- Camera flicker control/Hz range
- No, not PWM dimmed
- Control
- Input method
- DMX Control or Line Dimmed
- Protocols
- DMX / RDM via RJ45
- Modes (Footprint)
- 1 Channel (Intensity) for DMX
- RDM configuration
- Yes
- UI type
- 7-segment address display, local level control via UI
- Local control
- Yes
- Onboard presets
- No
- Onboard sequences
- No
- Onboard effects
- No
- Fixture to fixture control
- No
- Electrical
- Voltage range
- 114–125 V, 60 Hz (120 V)
- 209–252 V, 50/60 Hz (230 V)
- Input method
- Hardwired, 1 m cord, bare end or various connector options (120 V)
- Hardwired, 1 m cord, bare end (230 V)
- Inrush
- 30 A (first half-cycle) at 120 V
- 12 A (first half-cycle) at 230 V
- Fixtures per circuit
- 120 V: 14 (20 A switched circuit, R20 module or similar)
- 230 V: 6 fixtures per non-dimmed circuit (ER15AFR module)
- Wattage (Typical/Standby)
- 150 W / 1.2 W (120 V)
- 175 W / 3.7 W (230 V)
- Current draw
- 1.26 A at 120 V
- 0.75 A at 230 V
- Notes
- - When using line dimming, see the S4WRD manual for dimmer setup.
- - When using line dimming, standby power is 0 W.C96
- Thermal
- Ambient operating temp
- 5°–50° C (41°–122° F)
- Fan (controllable)
- Yes (no)
- Droop compensation
- No
- dB range
- 28 dBa (average at 1 m)
- BTUs/hour
- 529 (120 V)
- 597 (230 V)
- Physical
- Materials
- Die-cast aluminum
- Color
- Black
- Mounting options
- Yoke
- IP rating
- IP-20, indoor only
- Weight
- 3.73 lb (1.69 kg) (Retrofit only)
- Included accessories
- Source 4WRD mounting post
- Warranty
- Fixture
- Five years
- LED array
- Ten years
- Regulatory and Compliance
- Approved regulatory standards
- UL 1573 (complete luminaire) UL 1598C (retrofit kit)
- CSA C22.2 No. 166 (complete luminaire) CSA TIL B79-A (retrofit kit)
- CE Compliant
- S4WRD II LED
![ETC fos/4 Panel Chimera Ez [Pop] Direct Fit Egg Crate, 60-Degree, Large - PSSL ProSound and Stage Lighting](http://shop.solotech.com/cdn/shop/files/FOS4P24EC60.jpg?v=1690289562&width=533)
