ETC Source 4WRD Color Retrofit Kit with Edison Cable - Black
Source 4WRD LED retrofit is a replacement for a standard Source Four luminaire burner assembly that will convert the HPL source to an LED. The simple and quick upgrade is non-destructive and takes only minutes. It can be done without breaking focus on your luminaire. Source 4WRD LED is theatrically dimmable via DMX or line dimmable to allow flexibility to your installation. The Source Four luminaires will run cool and efficiently without lamp replacements.
Features:
- Can be fitted to any Source Four ellipsoidal fixture body
- Simple installation and setup
- 3000K color temperature
- DMX and AC dimmable
- 3-year warranty
Specifications:
- Source:
- Nichia LEDs
- 4,881 / 3,713 / 4,463 Max lumens
- 33.9 / 36.8 / 34.3 Lumens per watt
- L70 rating (hours to 70% output): TBA hours (both variants)*
- COLOR:
- Colors used: RGB-A (Red, Green, Blue and Amber)
- Color temperature range 2,200–6,500 K
- Calibrated array
- No red shift
- Optical:
- Swappable lens tubes between 5-90 degrees
- 79 mm Gate size
- 6.25”-14” (depending on lens tube) aperture size
- Pattern projection
- A or B Pattern size
- 1.2 K and 20 K Camera flicker control/ Hz range
- Electrical:
- 100-240 VAC 50/60 Hz power input
- 150 W draw at full
- Maximum of 10 fixtures per non-dimmed circuit (R20 module)
- Requires power from a non-dimmable source.
- Inrush:
- 120 V: 32 A (first half-cycle)
- 240 V: 60 A (first half-cycle)
- Thermal:
- Ambient operating temp: 5°–50° C (41°–122° F)
- Fan (controllable)
- No Droop compensation
- TBD dBa average at 1 m
- 458 BTUs/hour (120 V)
- 449 BTUs/hour (240 V)
- Controls:
- DMX or RJ45 connectors Input method
- DMX / RDM via RJ45
- 6 modes for footprint
- RDM configuration
- UI type: Seven-segment
- 12 Onboard presets
- 5 Onboard sequences
- No onboard effects
- Fixture-to-fixture control
- *Note about LED luminaire lifetime:
- Physical:
- Source 4WRD Color Dimensions (120 V and 240 V)
- Source:
- Nichia LEDs
- 4,881 / 3,713 / 4,463 Max lumens
- 33.9 / 36.8 / 34.3 Lumens per watt
- L70 rating (hours to 70% output): TBA hours (both variants)*
- COLOR:
- Colors used: RGB-A (Red, Green, Blue and Amber)
- Color temperature range 2,200–6,500 K
- Calibrated array
- No red shift
- Optical:
- Swappable lens tubes between 5-90 degrees
- 79 mm Gate size
- 6.25”-14” (depending on lens tube) aperture size
- Pattern projection
- A or B Pattern size
- 1.2 K and 20 K Camera flicker control/ Hz range
- Electrical:
- 100-240 VAC 50/60 Hz power input
- 150 W draw at full
- Maximum of 10 fixtures per non-dimmed circuit (R20 module)
- Requires power from a non-dimmable source.
- Inrush:
- 120 V: 32 A (first half-cycle)
- 240 V: 60 A (first half-cycle)
- Thermal:
- Ambient operating temp: 5°–50° C (41°–122° F)
- Fan (controllable)
- No Droop compensation
- TBD dBa average at 1 m
- 458 BTUs/hour (120 V)
- 449 BTUs/hour (240 V)
- Controls:
- DMX or RJ45 connectors Input method
- DMX / RDM via RJ45
- 6 modes for footprint
- RDM configuration
- UI type: Seven-segment
- 12 Onboard presets
- 5 Onboard sequences
- No onboard effects
- Fixture-to-fixture control
- *Note about LED luminaire lifetime:
- Physical:
- Source 4WRD Color Dimensions (120 V and 240 V)
