ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture Set of 8

More ETC products

Write a review Q&A SKU: TZ-LEDS4LUSTRS2-BDL Solotech ID#: 122312
1 of 2
Get a quote

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture Set of 8

This set contains 8 units of the following:

*ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture (Engine Only, No Barrel/Lens)

The Source Four LED Series 2 revolutionizes LED lighting. With optimized arrays and finely-tuned electronics, Series 2 offers a combination of light quality and output that cannot be matched. Source Four LED Series 2 Lustr luminaires are based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color with a depth and feel beyond any RGB fixture. Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, we highly recommend that you use EDLT lens tubes. We also offer a special LED-only version of the 50° lens tube. Combine with available adapters to transform your fixture into a fully functional Fresnel or CYC light.

Features:

  • Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel.
  • Multiple control options, including Direct, RGB, HSIC, and console-free modes
  • 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
  • ETL Listed to UL1573; IP20 rated

Specifications:

  • Source:
    • LED details: 60 Lumileds LUXEON® Rebel LED
    • Max lumens:
      • Series 2 Lustr: 8,667
      • Series 2 Daylight HD: 13,060
      • Series 2 Tungsten HD: 11,512
    • Lumens per watt:
      • Series 2 Lustr: 51.9
      • Series 2 Daylight HD: 52.7
      • Series 2 Tungsten HD: 55.3
    • L70 rating (hours to 70% output):
      • Lustr: 54,000 hours
      • Daylight/Tungsten HD: >60,000 hours
  • Color:
    • Colors used:
      • Series 2 Lustr: Red, Amber, Lime, green, Cyan, Blue, Indigo
      • Series 2 Daylight HD: Red, Mint, Blue, Indigo
      • Series 2 Tungsten HD: Red, Red-Orange, Mint, Blue, Indigo
    • Color temperature range: Series 2 Lustr: 2,200-6,500 K*
    • Calibrated array: Yes
    • Red shift: Yes (can be disabled)
  • Optical:
    • Beam angle range: Swappable lens tubes between 5°-90°
    • Gate size: 80 mm
    • Aperture size: 6.25-14 in (depending on lens tube)
    • Pattern projection: Yes
    • Pattern size: A or B
    • Camera flicker control/Hz range: Yes: 900-25,000 Hz
    • Notes: Can be used with LED CYC and Fresnel adapters
  • Control:
    • Input method: DMX512 via 5-pin XLR
    • Protocols: DMX512/RDM
    • RDM configuration: Yes
    • UI type: LCD
    • Local control: Yes
    • Onboard presets: Yes
    • Onboard sequences: Yes
    • Onboard effects: No
    • FixtureLink: Yes
    • Notes: 15-bit virtual dimming engine
  • Electrical:
    • Voltage range: 100-240 VAC 50/60 Hz
    • Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
    • Inrush:
      • 50 A at 120 V (First half-cycle)
      • 107 A at 240 V (First half-cycle)
    • Fixtures per circuit*:
      • 9 Lustr or 7 Daylight HD/Tungsten HD
      • (15 A via power thru connector)
      • 10 Lustr or 8 Daylight HD/Tungsten HD
      • (via R20 module or Echo Relay Panel)
    • Wattage typical:
      • Series 2 Lustr: 167
      • Series 2 Daylight HD: 248
      • Series 2 Tungsten HD: 208
    • Current draw:
      • Series 2 Lustr:
        • 1.44 A at 120 V
        • 0.78 A at 240 V
      • Series 2 Daylight HD:
        • 1.75 A at 120 V
        • 0.93 A at 240 V
      • Series 2 Tungsten HD:
        • 2.08 A at 120 V
        • 0.93 A at 240 V
  • Thermal:
    • Ambient operating temp: 0°-40°C (32°-104°F)
    • Fan (controllable): Yes (yes)
    • Droop compensation: Yes
    • dB range: 22.5 dBA average at 1 m
    • BTUs/hour:
      • Series 2 Lustr: 569
      • Series 2 Daylight HD: 846
      • Series 2 Tungsten HD: 709
  • Physical:
    • Materials: Die-cast, all metal housing
    • Color options: Black, white, silver, or custom color
    • Mounting options: Yoke, cyc floor stand (sold separately)
    • IP rating: IP20
    • Weight:
      • With barrel: 8.3 kg (18.3 lb)
      • Without barrel: 6.5 kg (14.3 lb)
    • Included accessories: Hanging yoke, 1.5 m power cable, softfocus diffuser in an A-size gobo holder, gel frame, c-clamp*
    • Notes:
      • Positive locking double-clutch fixture body
      • Slot for glass or stainless steel patterns and soft focus diffuser
      • Wide accessory slot with sliding cover for motorized pattern device or iris

Reviews

Write a review

Score

Questions & Answers

Ask a question