ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture
Used Units sold in sets of 8
The Source Four LED Series 2 revolutionizes LED lighting. With optimized arrays and finely-tuned electronics, Series 2 offers a combination of light quality and output that cannot be matched. Source Four LED Series 2 Lustr luminaires are based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color with a depth and feel beyond any RGB fixture. Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, we highly recommend that you use EDLT lens tubes. We also offer a special LED-only version of the 50° lens tube. Combine with available adapters to transform your fixture into a fully functional Fresnel or CYC light.
Features:
- Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel.
- Multiple control options, including Direct, RGB, HSIC, and console-free modes
- 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
- ETL Listed to UL1573; IP20 rated
Specifications:
- Source:
- LED details: 60 Lumileds LUXEON® Rebel LED
- Max lumens:
- Series 2 Lustr: 8,667
- Series 2 Daylight HD: 13,060
- Series 2 Tungsten HD: 11,512
- Lumens per watt:
- Series 2 Lustr: 51.9
- Series 2 Daylight HD: 52.7
- Series 2 Tungsten HD: 55.3
- L70 rating (hours to 70% output):
- Lustr: 54,000 hours
- Daylight/Tungsten HD: >60,000 hours
- Color:
- Colors used:
- Series 2 Lustr: Red, Amber, Lime, green, Cyan, Blue, Indigo
- Series 2 Daylight HD: Red, Mint, Blue, Indigo
- Series 2 Tungsten HD: Red, Red-Orange, Mint, Blue, Indigo
- Color temperature range: Series 2 Lustr: 2,200-6,500 K*
- Calibrated array: Yes
- Red shift: Yes (can be disabled)
- Optical:
- Beam angle range: Swappable lens tubes between 5°-90°
- Gate size: 80 mm
- Aperture size: 6.25-14 in (depending on lens tube)
- Pattern projection: Yes
- Pattern size: A or B
- Camera flicker control/Hz range: Yes: 900-25,000 Hz
- Notes: Can be used with LED CYC and Fresnel adapters
- Control:
- Input method: DMX512 via 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- FixtureLink: Yes
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100-240 VAC 50/60 Hz
- Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
- Inrush:
- 50 A at 120 V (First half-cycle)
- 107 A at 240 V (First half-cycle)
- Fixtures per circuit*:
- 9 Lustr or 7 Daylight HD/Tungsten HD
- (15 A via power thru connector)
- 10 Lustr or 8 Daylight HD/Tungsten HD
- (via R20 module or Echo Relay Panel)
- Wattage typical:
- Series 2 Lustr: 167
- Series 2 Daylight HD: 248
- Series 2 Tungsten HD: 208
- Current draw:
- Series 2 Lustr:
- 1.44 A at 120 V
- 0.78 A at 240 V
- Series 2 Daylight HD:
- 1.75 A at 120 V
- 0.93 A at 240 V
- Series 2 Tungsten HD:
- 2.08 A at 120 V
- 0.93 A at 240 V
- Thermal:
- Ambient operating temp: 0°-40°C (32°-104°F)
- Fan (controllable): Yes (yes)
- Droop compensation: Yes
- dB range: 22.5 dBA average at 1 m
- BTUs/hour:
- Series 2 Lustr: 569
- Series 2 Daylight HD: 846
- Series 2 Tungsten HD: 709
- Physical:
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Yoke, cyc floor stand (sold separately)
- IP rating: IP20
- Weight:
- With barrel: 8.3 kg (18.3 lb)
- Without barrel: 6.5 kg (14.3 lb)
- Included accessories: Hanging yoke, 1.5 m power cable, softfocus diffuser in an A-size gobo holder, gel frame, c-clamp*
- Notes:
- Positive locking double-clutch fixture body
- Slot for glass or stainless steel patterns and soft focus diffuser
- Wide accessory slot with sliding cover for motorized pattern device or iris
- Source:
- LED details: 60 Lumileds LUXEON® Rebel LED
- Max lumens:
- Series 2 Lustr: 8,667
- Series 2 Daylight HD: 13,060
- Series 2 Tungsten HD: 11,512
- Lumens per watt:
- Series 2 Lustr: 51.9
- Series 2 Daylight HD: 52.7
- Series 2 Tungsten HD: 55.3
- L70 rating (hours to 70% output):
- Lustr: 54,000 hours
- Daylight/Tungsten HD: >60,000 hours
- Color:
- Colors used:
- Series 2 Lustr: Red, Amber, Lime, green, Cyan, Blue, Indigo
- Series 2 Daylight HD: Red, Mint, Blue, Indigo
- Series 2 Tungsten HD: Red, Red-Orange, Mint, Blue, Indigo
- Color temperature range: Series 2 Lustr: 2,200-6,500 K*
- Calibrated array: Yes
- Red shift: Yes (can be disabled)
- Colors used:
- Optical:
- Beam angle range: Swappable lens tubes between 5°-90°
- Gate size: 80 mm
- Aperture size: 6.25-14 in (depending on lens tube)
- Pattern projection: Yes
- Pattern size: A or B
- Camera flicker control/Hz range: Yes: 900-25,000 Hz
- Notes: Can be used with LED CYC and Fresnel adapters
- Control:
- Input method: DMX512 via 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- FixtureLink: Yes
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100-240 VAC 50/60 Hz
- Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
- Inrush:
- 50 A at 120 V (First half-cycle)
- 107 A at 240 V (First half-cycle)
- Fixtures per circuit*:
- 9 Lustr or 7 Daylight HD/Tungsten HD
- (15 A via power thru connector)
- 10 Lustr or 8 Daylight HD/Tungsten HD
- (via R20 module or Echo Relay Panel)
- Wattage typical:
- Series 2 Lustr: 167
- Series 2 Daylight HD: 248
- Series 2 Tungsten HD: 208
- Current draw:
- Series 2 Lustr:
- 1.44 A at 120 V
- 0.78 A at 240 V
- Series 2 Daylight HD:
- 1.75 A at 120 V
- 0.93 A at 240 V
- Series 2 Tungsten HD:
- 2.08 A at 120 V
- 0.93 A at 240 V
- Series 2 Lustr:
- Thermal:
- Ambient operating temp: 0°-40°C (32°-104°F)
- Fan (controllable): Yes (yes)
- Droop compensation: Yes
- dB range: 22.5 dBA average at 1 m
- BTUs/hour:
- Series 2 Lustr: 569
- Series 2 Daylight HD: 846
- Series 2 Tungsten HD: 709
- Physical:
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Yoke, cyc floor stand (sold separately)
- IP rating: IP20
- Weight:
- With barrel: 8.3 kg (18.3 lb)
- Without barrel: 6.5 kg (14.3 lb)
- Included accessories: Hanging yoke, 1.5 m power cable, softfocus diffuser in an A-size gobo holder, gel frame, c-clamp*
- Notes:
- Positive locking double-clutch fixture body
- Slot for glass or stainless steel patterns and soft focus diffuser
- Wide accessory slot with sliding cover for motorized pattern device or iris
