ETC Desire D60X Studio Tungsten LED Par with Edison Plug - White

More ETC products

Write a review Q&A SKU: SELD60X-T-1-A-1 Solotech ID#: 121802
1 of 3
Unfortunately the ETC Desire D60X Studio Tungsten LED Par with Edison Plug - White is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

View full details
Unfortunately the ETC Desire D60X Studio Tungsten LED Par with Edison Plug - White is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

Description

ETC Desire D60X Studio Tungsten LED Par with Edison Plug - White

ETC Desire D60X Studio Tungsten LED Par - White

ETC’s Desire Series D60X is ready for mounting inside or outside–wherever you need it. The D60X offers a rugged die-cast enclosure, noiseless fan-free operation and multiple lens options that can be changed on-site.

D60X Studio Tungsten – Studio Tungsten contains sixty 3000 K LEDs for high-intensity, non-variable warm-white output

ETC T1PA-A-1 Edison Plug to True1 Receptacle, Ul 1573, 6-Foot/2-Meter Power Cable - White

6 ft TRUE1 TOP to parallel blade U-ground (Edison) connector.

Specifications:

  • Source:
    • LED details: LED details
    • Max lumens: Studio Tungsten: 6,482
    • Lumens per watt: Studio Tungsten: 43.2
    • L70 rating (hours to 70% output): 50,000 hours
  • Color:
    • Colors used: Studio Tungsten: White
    • Color temperature range: 2,700–6,500K
    • Calibrated array: Studio Tungsten: No
  • Optical:
    • Beam angle range: 8°–17°
    • Aperture size: 9 in
    • Pattern projection: No
    • Pattern size: N/A
    • Camera flicker control/Hz range: Yes: 900–25,000 Hz
    • Notes: Secondary lenses available for multiple beam-spread options
  • Control:
    • Input method: DMX512 via termination board
    • Protocols: DMX512/RDM
    • Modes (footprint): See page 6
    • RDM configuration: Yes
    • UI type: None (configure via RDM)
    • Local control: No
    • Onboard presets: Yes
    • Onboard sequences: No
    • Onboard effects: No
  • Control:
    • Onboard sequences: Yes
    • Onboard effects: No
    • Fixture-to-fixture control: Yes
    • Notes: 15-bit virtual dimming engine
  • Electrical:
    • Voltage range: 100 VAC–240 VAC 50/60 Hz
    • Input method: Waterproof, 39 in power lead Requires power from non-dim source
    • Inrush: 46 A at 120 V (First half-cycle) 77 A at 240 V (First half-cycle)
    • Fixtures per circuit(All measurements are for 120 V, 60 Hz. Results may vary in different regions.)- 10 (15 A may be fed on same circuit)
    • Wattage typical: 124
    • Current draw: 1 A
  • Thermal:
    • Ambient operating temp: -20°–40° C (-4°–104° F)
    • Fan (controllable): No
    • Droop compensation: Yes
    • dB range: N/A
    • BTUs/hour: 423.088
  • Physical:
    • Materials: Die-cast, all metal housing
    • Color options: White
    • IP rating: IP66 for exterior wet-location
    • Weight: 10.43 kg (23 lb)
    • Included accessories: Hanging yoke
  • Warranty:
    • Fixture: 5 years
    • LED array: 10 years
  • Regulatory and Compliance:
    • Approved regulatory standards:
      • cETLus Listed
      • Conforms to UL1598
      • Certified to CSA C22.2 No. 250.0
      • CE Compliant

Reviews

Write a review

Score

Questions & Answers

Ask a question