ETC Desire D40XT Lustr+ LED Par with Edison Plug - Black
ETC Desire D40XT Lustr+ LED Par - Black
ETC’s Desire Series D40XT puts the seven-color x7 system into a round theatrical wash light fully sealed and rated for IP66 outdoor use. The x7 Color System produces the widest range of spectrally-balanced saturated and tinted color choices available. The D40XT offers a rugged die-cast enclosure, noiseless fan-free operation, multiple lens options and advanced user interface. Its watertight construction makes it ideal for outdoor events and installations.
D40XT LED ARRAY OPTIONS - D40XT fixtures are based on the x7 Color System that uses seven different LED colors to achieve true, usable broad-spectrum color. The D40XT luminaire is available with any one of the following x7 color arrays to best suit the intended application.
D40XT Lustr+ – optimized with six colors plus high-intensity white LEDs to create an ideal front light wash fixture. Full range color, with an emphasis on lighter colors and white.
ETC T1PA-A Edison Plug to True1 Receptacle, Ul 1573, 6-Foot/2-Meter Power Cable, Black
6-foot TRUE1 TOP to parallel blade U-ground (Edison) connector.
Specifications:
- Source:
- LED details: 40 Lumileds LUXEON® Rebel 2.5 W LED
- Max lumens: Lustr+: 2,593
- Lumens per watt: Lustr+: 25.2
- L70 rating (hours to 70% output): 50,000 hours
- Color:
- Colors used: Lustr+: Red, Amber, Green, Cyan, Blue, Indigo, White
- Color temperature range: 2,700–6,500 K
- Calibrated array: Lustr: Yes
- Red shift: Yes
- Optical:
- Beam angle range: 8°–71°
- Aperture size: 7.5 in
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
- Notes: Secondary lenses available for multiple beam-spread options
- Control:
- Input method: DMX512 via watertight 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Waterproof, 39 in power in and thru
- Inrush:
- 15 A at 120 V (First half-cycle)
- 40 A at 240 V (First half-cycle)
- Fixtures per circuit (*All measurements are for 120 V, 60 Hz. Results may vary in different regions)- :
- 9 (15 A power thru connector)
- 10 (R20 module or similar)
- Wattage typical: 110
- Current draw: 1/0.5
- Thermal:
- Ambient operating temp: -20°–40° C (-4°–104° F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 375.32
- Physical:
- Materials: Die-cast, all metal housing
- Color options: Black
- Mounting options: Yoke
- IP rating: IP66 for exterior wet location use
- Weight: 6.4 kg (14 lb)
- Included accessories: Hanging yoke, 5 ft power cord, media holder
- Warranty:
- Fixture: 5 years
- LED array: 10 years
- Regulatory and Compliance:
- Approved regulatory standards:
- cETLus Listed
- Conforms to UL1598
- Certified to CSA C22.2 No. 250.0
- CE Compliant
- LED details: 40 Lumileds LUXEON® Rebel 2.5 W LED
- Max lumens: Lustr+: 2,593
- Lumens per watt: Lustr+: 25.2
- L70 rating (hours to 70% output): 50,000 hours
- Colors used: Lustr+: Red, Amber, Green, Cyan, Blue, Indigo, White
- Color temperature range: 2,700–6,500 K
- Calibrated array: Lustr: Yes
- Red shift: Yes
- Beam angle range: 8°–71°
- Aperture size: 7.5 in
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
- Notes: Secondary lenses available for multiple beam-spread options
- Input method: DMX512 via watertight 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Waterproof, 39 in power in and thru
- Inrush:
- 15 A at 120 V (First half-cycle)
- 40 A at 240 V (First half-cycle)
- Fixtures per circuit (*All measurements are for 120 V, 60 Hz. Results may vary in different regions)- :
- 9 (15 A power thru connector)
- 10 (R20 module or similar)
- Wattage typical: 110
- Current draw: 1/0.5
- Ambient operating temp: -20°–40° C (-4°–104° F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 375.32
- Materials: Die-cast, all metal housing
- Color options: Black
- Mounting options: Yoke
- IP rating: IP66 for exterior wet location use
- Weight: 6.4 kg (14 lb)
- Included accessories: Hanging yoke, 5 ft power cord, media holder
- Fixture: 5 years
- LED array: 10 years
- Approved regulatory standards:
- cETLus Listed
- Conforms to UL1598
- Certified to CSA C22.2 No. 250.0
- CE Compliant
