ETC CSLINEAR4-5 ColorSource Linear 4 with 5-Pin DMX/XLR and Edison Plug - Silver
The CSLINEAR4-5-A package contains the following items:
*ETC CSLINEAR4-5 ColorSource Linear 4 with 5-Pin DMX/XLR - Silver
ColorSource Linear combines the bright, bold output of the ColorSource family with a sleek linear design to create a versatile and affordable strip light. Whether being used to create a stunning wash of light on your stage or to light a wall, the ColorSource Linear uses ETC’s unique RGB-L color system to provide beautiful LED lighting. Like the other fixtures in the ColorSource family, ColorSource Linear shines with brighter, richer, and more diverse colors than you’ll get with RGB fixtures. With its single-row LED array, this low profile fixture can be quietly tucked away into hard to fit spaces. The optics were designed so there is no visible separation in light when the fixtures are lined up end to end. This slender design and seamless beam of light make it a perfect fixture for dance shows with small wing space, cafeteria stages with limited masking, and foot lights for any stage.
Features:
- Available in three lengths:
- Linear 1 (0.5 Meters) - one cell of control
- Linear 2 (1 Meter) - two cells of control
- Linear 4 (2 Meters) - four cells of control
- ETC’s RGB-L chipset (Red, Green, Blue and Lime): Available in Original or Deep Blue
- Homogenized optics
- Simple user interface with seven-segment display
- PowerCon in and thru power connections
- DMX in and thru (5-pin XLR or RJ45)
- RDM or local configuration
- LED droop compensation for consistent output
- Optically calibrated
- Tour-ready, aluminum housing
Specifications:
- General:
- RGB-L chipset color-mixing wash luminaire with eight emitters
- IP20-rated for indoor use
- Power- and DMX-in/thru connections for simple setup
- Seven-segment, three-button interface
- 12 onboard, customizable presets and five sequences
- Physical:
- Rugged, die-cast, aluminum housing
- Two secondary lens slots
- Available in black - White or silver - Custom colors available upon request
- Trunnions included
- Electrical:
- 100VAC to 240VAC 50/60Hz universal power input
- PowerCon in and thru power connections
- Up to 9 cells (0.5 meter segments, 15A max) may be linked via power thru connector
- Up to 10 cells (0.5 meter segments) total per circuit when used with ETC R20 relay module or Unison® Echo Relay Panel. - Consult breaker trip curves when used with other equipment
- Requires power from a non-dimmable source
- Inrush (Linear 1/Linear 2/Linear 4): - 120V: 35A/35.6A/67.5A (First half-cycle) - 240V: 49A/85.6A/153A (First half-cycle)
- ETL Listed to UL1573
- LED:
- 55,000-hour LED life (70% intensity after 55,000 hours)
- 40 Luxeon® Z LED emitters (five per optic)
- Color:
- Exclusive RGB-L Color array - Also available in Deep Blue array
- Unparalleled brightness and color range
- Droop compensation maintains color accuracy during use
- Optically calibrated to ensure consistency across fixture
- Optical:
- Homogenized optics for a consistent, smooth beam
- Primary field angle of 24.9° and beam angle of 14.5°
- Secondary lenses available for multiple beam-spread options. Refer to accessories charts for lenses available
- Control:
- DMX512 in and thru via five-pin XLR or RJ45 connectors (End-of-line termination required)
- RGB, IRGBS, Direct and single channel control (See DMX control table for additional information)
- 15-bit virtual dimming engine provides smooth, high-quality theatrical fades
- RDM support for address and setting changes
- Local control of presets (12) and sequences (5)
- Thermal:
- Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing Ambient operating temperature of 32° to 104°F (0° to 40°C)
- Active electronic thermal management using variable-speed fan
*ETC T1PA-A Edison Plug to True1 Receptacle, Ul 1573, 6-Foot/2-Meter Power Cable - Black
- Linear 1 (0.5 Meters) - one cell of control
- Linear 2 (1 Meter) - two cells of control
- Linear 4 (2 Meters) - four cells of control
- General:
- RGB-L chipset color-mixing wash luminaire with eight emitters
- IP20-rated for indoor use
- Power- and DMX-in/thru connections for simple setup
- Seven-segment, three-button interface
- 12 onboard, customizable presets and five sequences
- Physical:
- Rugged, die-cast, aluminum housing
- Two secondary lens slots
- Available in black - White or silver - Custom colors available upon request
- Trunnions included
- Electrical:
- 100VAC to 240VAC 50/60Hz universal power input
- PowerCon in and thru power connections
- Up to 9 cells (0.5 meter segments, 15A max) may be linked via power thru connector
- Up to 10 cells (0.5 meter segments) total per circuit when used with ETC R20 relay module or Unison® Echo Relay Panel. - Consult breaker trip curves when used with other equipment
- Requires power from a non-dimmable source
- Inrush (Linear 1/Linear 2/Linear 4): - 120V: 35A/35.6A/67.5A (First half-cycle) - 240V: 49A/85.6A/153A (First half-cycle)
- ETL Listed to UL1573
- LED:
- 55,000-hour LED life (70% intensity after 55,000 hours)
- 40 Luxeon® Z LED emitters (five per optic)
- Color:
- Exclusive RGB-L Color array - Also available in Deep Blue array
- Unparalleled brightness and color range
- Droop compensation maintains color accuracy during use
- Optically calibrated to ensure consistency across fixture
- Optical:
- Homogenized optics for a consistent, smooth beam
- Primary field angle of 24.9° and beam angle of 14.5°
- Secondary lenses available for multiple beam-spread options. Refer to accessories charts for lenses available
- Control:
- DMX512 in and thru via five-pin XLR or RJ45 connectors (End-of-line termination required)
- RGB, IRGBS, Direct and single channel control (See DMX control table for additional information)
- 15-bit virtual dimming engine provides smooth, high-quality theatrical fades
- RDM support for address and setting changes
- Local control of presets (12) and sequences (5)
- Thermal:
- Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing Ambient operating temperature of 32° to 104°F (0° to 40°C)
- Active electronic thermal management using variable-speed fan
*ETC T1PA-A Edison Plug to True1 Receptacle, Ul 1573, 6-Foot/2-Meter Power Cable - Black
6-Foot TRUE1 TOP to parallel blade U-ground (Edison) connector.
