DPA 4006 Omnidirectional Microphone

DPA 4006 Omnidirectional Microphone

The DPA 4006 Omni Mic delivers exceptional transparency across any recording environment. Engineered to capture intricate detail and sonic depth, this microphone excels at reproducing high-frequency characteristics with impressive definition across a wide range of instruments. Experience natural sound reproduction with high sensitivity, a low noise floor, and a linear frequency response spanning 10 to 20 kHz (±2 dB). Perfect for studio recording, live sound, and professional applications where accuracy and clarity are non-negotiable.

The DPA 4006 Omnidirectional Microphone is available in a compact version or with an XLR connector mounted on either the rear or side of the microphone.

Features:

• Acoustic authenticity
• Linear throughout a large frequency bandwidth
• Detailed and natural reproduction
• High sensitivity and low noise floor
• Excellent for concert halls and spot miking acoustical instruments
• Modular flexibility

Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 10 Hz - 20 kHz
• Effective frequency range ±2 dB: 10 Hz - 20 kHz
• Sensitivity, nominal, ±2 dB at 250 Hz: 36 mV/Pa; -28,9 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
• Distortion, THD < 1%: 133 dB SPL RMS, 136 dB SPL peak
• Dynamic range: Typ. 121 dB
• Max. SPL, THD 10%: 146 dB SPL peak
• Switchable attenuator, filters etc.: 0 dB / -20 dB
• Rated output impedance: 200 Ω
• Minimum load impedance: 2
• Cable drive capability: 100 m (328 ft)
• Output balance principle: Impedance balancing with Active Drive
• Common mode rejection ratio (CMRR): > 60 dB
• Power supply (for full performance): P48 (Phantom Power)
• Current consumption: 2.8 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Weight: 163 g (5.7 oz)
• Microphone diameter: 16 - 19 mm (0.6 - 0.75 in)
• Capsule diameter: 16 mm (0.6 in)
• Microphone length: 170 mm (6.7 in)
• Maximum output voltage, RMS: 8.0 V
• Polarity: +V at pin 2 for positive sound pressure
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90 %
• Matching tolerance (frequency response and sensitivity): ±0.5 dB
• Phase deviation for kit: < 5°
• Colours: Matte black