Yamaha RIO1608-D2 16 x 8 I/O Rack for CL and QL Series Consoles

Yamaha RIO1608-D2 16 x 8 I/O Rack for CL and QL Series Consoles

The Yamaha RIO1608-D2 is a high-performance I/O rack that features 16 analog inputs and 8 analog outputs, and is compatible with Yamaha CL and QL series consoles as well as the RIVAGE PM series. The RIO1608-D2 connects directly to Dante digital audio networks, allowing flexible system configuration. Dual power supply units are built in for high reliability, and a character/graphic display offers easy visual confirmation.

Features:

• 16 analog inputs and 8 outputs.
• Redundant connections are supported with primary and secondary connectors. Daisy chain connections are also supported.
• Comprehensive display and local control of gain and other parameters.
• Dual power supply units are built in for high reliability.

Specifications:

• External Sampling Frequency:
  • 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm
  • 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm
  • 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm
  • 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm
• Signal Delay:
  • Less than 1.7 ms Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz
  • Dante Receive Latency set to 0.25 msec
• Frequency Response:
  • +0.5, -1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz
  • +0.5, -1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz
• Total Harmonic Distortion (measured w/ 18dB/octave filter @80kHz):
  • Less than 0.05% 20 Hz-20 kHz @ +4 dBu into 600Ω, Fs= 48 kHz
  • Less than 0.05% 20 Hz-40 kHz @ +4 dBu into 600Ω, Fs= 96 kHz
  • INPUT to OUTPUT, Input Gain= Min.
• Hum & Noise (measured w/ A-Weight filter):
  • -128 dBu typ., Equivalent Input Noise, Input Gain= Max.
  • -88 dBu Residual output noise, ST master off.
• Dynamic Range:
  • 112 dB typ., DA Converter
  • 108 dB typ., INPUT to OUTPUT, Input Gain= Min.
• Crosstalk @ 1kHz (measured w/ a 30dB/octave filter @22kHz): -100dB, adjacent INPUT/OUTPUT channels, Input Gain= Min.
• Dimensions (WxHxD): 18.90 x 5.20 x 14.47"
• Net Weight: 21.16 lbs
• Power Requirements:
  • Wattage: 72W
  • Voltage and Hertz: 100-240V 50/60 Hz
• Temperature Range:
  • Operating: 32 to 104°F
  • Storage: -4 to 140°F
• NC Value:
  • FAN MODE LOW: NC=15
  • FAN MODE HIGH: NC=25
  • Measurement position: 1m from the front of the unit