Williams Sound WIR TX75 S Infrared Slave Emitter Alternatives

Williams Sound WIR TX75 S Infrared Slave Emitter

More Williams Sound products

Write a review Q&A SKU: WIR-TX75-S Solotech ID#: 78732
1 of 2
Unfortunately the Williams Sound WIR TX75 S Infrared Slave Emitter is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

View full details
Unfortunately the Williams Sound WIR TX75 S Infrared Slave Emitter is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

Description

Williams Sound WIR TX75 S Infrared Slave Emitter

The WIR TX75 S infrared slave emitter can be added to the WIR TX75 C/D mid-range infrared transmitter(s) for additional coverage of up to 24,000 square feet*, when mounted up to 100 feet from the master emitter. A maximum of two slaves can be added for up to 36,000 square feet total coverage. Placing additional slaves in the same room increases coverage and enhances freedom of movement. A single CAT5 cable carries both power and signal from the WIR TX75 C/D to the slaves – truly a one-cable connection.Linking bar and mounting bracket are included. 5-year warranty.

Use for:

  • Courtrooms
  • Conferences
  • Houses of Worship
  • Universities
  • Cinemas

*Operating range varies based on receiver used. See emitter specifications for coverage area by receiver type.

System includes:

  • (1) WIR TX 75 S infrared slave emitter
  • (1) WCA 096 12" CAT5 cable
  • (1) WCA 091 25’ CAT5 cable
  • (1) MLB 003 slave linking bar
  • (1) BKT 024 wall/ceiling mounting bracket

Features:

  • Add one slave unit to the WIR TX75 C/D mid-range infrared transmitter for additional coverage of up to 24,000 square feet. Add two slaves for coverage of up to 36,000 sq. ft.
  • Truly a one-cable connection-a single CAT5 cable carries both power and signal from the WIR TX75 C/D to the slaves
  • 5-year warranty

Specifications:

WIR TX75 Architectural and Engineering Specifications

  • The infrared slave emitter will work with the WIR TX 75 C (or D) infrared transmitter(s).
  • The slave emitter shall have a minimum coverage of 6,000 sq. ft. with the WIR RX22-4 receiver in single-channel mode.
  • The slave emitter shall be housed in a heavy-duty black plastic enclosure with a durable infra-red transparent front lens. It shall be convection cooled without fans. It shall have the ability for mounting on an omni-directional mounting bracket or a linking bar to mount above or below the WIR TX 75 C (or D) transmitter. It shall have a removable front bezel.
  • The slave emitter shall have a single CAT-5 input which shall deliver both power and baseband signal from the WIR TX 75 C (or D) transmitter. It shall have a green LED indicator showing when power is received from the WIR TX 75 C (or D) transmitter and a yellow LED showing audio is being received from the WIR TX 75 C (or D).
  • There shall be a switch on the back to turn off the indicator LED’s if desired.
  • The slave emitter shall be covered by a five-year warranty, 90 days on accessories.
  • This infrared slave emitter shall be the Williams Sound model WIR TX 75 S.

WIR TX75:

  • Dimensions, Weight: 10.0" W (25.4 cm) x 3.1" D (7.9 cm) x 1.5" H (3.8 cm) w/o faceplate or 2.5" H (6.4 cm) w/faceplate, 0.6 lbs (0.3kg)
  • Color: Black with silver colored silk screen and silver colored faceplate Optional: white colored faceplate
  • Sleep/Power Save Mode: Shuts off carrier when no audio is present for 3 minutes
  • Modulation: FM Wideband, ±50kHz deviation max, 50 ?S pre-emphasis
  • Carrier Frequencies: 2.3MHz (Ch1) and 2.8MHz (Ch2). Default at power on = carriers off. Carriers are automatically enabled upon presence of audio.
  • Emitter IR Power: 0.7 W
  • Slave Coverage Area (minimum, 1-ch mode): Note: Slave emitter cannot be used without a master transmitter, but if the slave emitter is aimed so that its coverage area does not overlap that of the master, on its own it will provide: 12,000 sq. ft. (1,115 sq. m.) in single-channel mode with the RX22-4 receiver 6,000 sq. ft. (557 sq. m.) in single-channel mode with the RX15-2 receiver 4,000 sq. ft. (372 sq. m.) in single-channel mode with the RX18 receiver
  • Master + Slave Coverage Area (minimum, 1-ch mode): If slave transmitters are aimed to maximize coverage area (so that their coverage areas minimally overlap that of the master): 24,000 sq. ft. (2,230 sq. m) in single channel mode with the RX22-4, a master and (1) slave transmitter 36,000 sq. ft. (3,345 sq. m) in single channel mode with the RX22-4, a master and (2) slave transmitters
  • Indicators On/Off: 2-position switch turns on/off indicator lights
  • Signal-to-Noise Ratio: 70 dB, (line input)
  • Frequency Response: 95Hz to 17.6kHz, -3dB re 1kHz (line input) 125Hz to 17.0kHz, -3dB re 1kHz (microphone input)
  • Total Harmonic Distortion:
    • <1% (1 kHz, nominal deviation, line or microphone input)
    • From Master Input: 8p8c RJ45 connector input provides 48VDC 0.4A power, baseband RF, and a bi-directional RS-485 bus for control and status communications.
    • Slave Extension Cable: CAT-5e (or better) cable, maximum 100’ length, with RJ-45 8P8C male connector on each end, TIA568B
    • Slave Status Indicators (on "to slave" jacks): Green: Power/Unit Status Yellow: Transmit/Cable Status
    • Operating Requirements: 0-50° C (32°-122°F)
    • Mounting Kit: Wall or Ceiling mount: BKT 024 Omnidirectional mount Optional: slave linking bar (MLB 003)
    • Warranty: 5 Years
    • Approvals: CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme
    • Compatible Receivers: WIR RX22-4, WIR RX18, WIR RX15-2

Reviews

Write a review

Score

Questions & Answers

Ask a question