RME MADI Converter 2x6-Channel MADI Optical and Coaxial Converter

The MADI Converter converts MADI digital audio streams from optical format to coaxial and from coaxial to optical. The compact 19" housing with 1 unit height contains six fully independent bi-directional converters. The MADI converter is an ideal companion to RMEs MADI Bridge. Its six coaxial inputs and outputs can be converted to optical, which is advantageous in live and installed setups, and for longer cable lengths. The device can be placed underneath the RME MADI Bridge ideally; the coaxial in- and outputs of the two devices will be right next to each other vertically, and can be connected with short patch cables easily.

Features:

• Six, bi-directional MADI optical to BNC / BNC to optical converters, housed in a single space rack-mount chassis
• All twelve inputs are equipped with status LEDs on the front panel
• Input signal pass through unaltered
• Supports any format, 56 or 64 channels, at any sample rates
• Not affected by embedded invisible control commands, out-of-spec data rates, or violations of the MADI protocol
• Through the use of equalizing and highly sensitive input stages, coaxial cable lengths of 100 meters can be achieved
• Includes a 1 input, 3 output MIDI distributor
• Internal switching power supply allows operation with voltages ranging from 100 to 240 AC Volts
• Short-circuit-proof, has an integrated line-filter, is fully regulated against voltage fluctuations and suppresses mains interference

Specifications:

• Input MADI: 6 x BNC, 6 x optical
• Output MADI: 6 x BNC, 6 x optical
• MIDI input: 1 x 5-pin DIN
• MIDI output: 3 x 5-pin DIN
• Sync: not required
• Varipitch: Yes
• Sample rates: any
• Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 15 Watts
• Dimensions: 483 x 44 x 200 mm