Q-SYS DPM-300H 10-Channel Digital Cinema Audio Processor
QSC’s DPM is a powerful solution for today’s D-Cinema audio systems. From server to speakers, the DPM offers a complete set of tools to facilitate all the signal processing, audio distribution, monitoring, and automation control services required in a modern D-Cinema sound system.
The DPM builds on the legacy of QSC’s DCM and DCP products to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. Designed to be used with QSC’s Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC’s Digital Cinema Speakers (DCS), the DPM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration.
The DPM 100 and DPM 100H are configurable for passive and bi-amp operation. The DPM 300 and 300H are also configurable for tri-amp and quad-amp operation. Though optimized to receive audio content directly from a D-Cinema server, the DPM is also compatible with all analog cinema processor formats and features an 8-channel analog input for integration with 35 mm audio systems.
The DPM is more than an audio processor. Whether designing a system for a single auditorium or designing a large multiplex, the DPM offers the flexibility in configuration, networking, audio distribution, and advanced management services to get the job done.
Features:
- Digital inputs accept AES-3 audio from a D-Cinema server or other digital audio source
- Analog inputs accept audio from film processors or other 8 channel analog audio sources
- Additional analog inputs accommodate non-sync and Mic/Line sources
- Additional digital inputs include HDMI® (DPM 100H and DPM 300H only) and SPDIF
- The DPM 100H and DPM 300H include Dolby Audio™ (featuring Dolby Digital Plus™) and DTS-HD® decoding
- QSC Intrinsic Correction settings for optimal performance of QSC cinema speakers
- Master volume and full cinema processor EQ on all channels
- Booth monitor with front panel control for easy operation
- Passive or 2-way crossovers for three screen channels (all models)
- 3-way or 4-way crossovers for three screen channels (DPM 300 and 300H only)
- Compatible with all existing QSC DCA amplifiers
- Bypass mode – routes audio around failed components to ensure that the show will go on
- Control and monitoring via Ethernet including full SNMP support
- Continued development of software and firmware will add new capabilities via easy updates
Specifications:
- Dimensions & Accessories:
- Dimensions (HxWxD): 3.5" (2 RU) x 19" x 15"
- Line voltage requirements: 100 VAC – 240 VAC, 50/60 Hz
- Accessories included: 6 ft UL/CSA line cord, Connector Kit
- Front Panel Controls and Indicators:
- Monitor Volume/parameter adjust: Rotary encoder
- LCD: 128 x 64 bit Monochrome LCD
- Master Mute: Push buttons
- Master Volume: Rotary encoder
- USB Type B port: Config and management interface
- Monitor output: 3.5 mm TRS
- Rear Panel Connectors:
- Network RJ45: 10/100 Mbps network management
- Automation Inputs: RJ45 – 6 contact closure inputs
- RS232: DB-9 Serial Interface
- Channels 1-8 AES/EBU Inputs: RJ45
- Channels 15-16 AES/EBU Inputs: RJ45
- SPDIF Input: RCA — Stereo digital audio interface and Lt/ Rt Matrix
- Analog Inputs (1-8): DB-25
- Line Inputs: 3.5 mm TRS — Stereo Left and Right and Lt/ Rt Matrix
- Mic/Line input: XLR — Mic (+ phantom pwr) or line level
- HDMI input/output (DPM 100H): Type A female connectors
- DataPort connectors: HD-15 (11) — QSC amplifier interface
- H.I./V.I. output: 5-pin Euro-style (x1) – common GND
- Relay outputs: 3-pin Euro-style (x2) – max 30 VDC
- Monitor Speaker:
- Speaker: 2"x 3.5" full-range
- Audio Performance:
- A/D conversion: 24-bit delta-sigma, 48 kHz
- Frequency response: 20 Hz to 20 kHz (+- .5dB)
- Inputs/Outputs:
- Main Analog Input:
- Connector: DB25F - 8 channel
- Input stage type: Active balanced input
- Input impedance: 20k Ohms
- Max analog input level: +14.2 dBu (4.0 Vrms)
- Mic/Line Input (XLR):
- Input Stage Type: Active balanced input
- Input Impedance: 2.2k Ohms
- Max Analog Input Level: 26 dBu
- Input gain: 0 to 60dB in 1 dB steps
- Phantom power voltage: 15V
- Stereo Line Inputs:
- Connector: 3.5mm TRS mini jack
- Input stage type: Unbalanced input
- Input impedance (4dBu sens): > 10k Ohms
- Max analog input level (4dBu sens): 14 dBu (4.2 Vrms)
- Input impedance (-10dBV sens): 2.7k Ohms
- Max analog input level (-10dBV sens): 0 dBV (1 Vrms)
- DataPort Outputs (HD15):
- Max output level: 14 dBu
- Dynamic range (unweighted): > 109 dB
- HI/VI Outputs:
- Connector: 5-pin Euro-style with common GND
- Output stage type: Balanced output
- Max output level: 18 dBu (adjustable)
- Monitor Headphone Output:
- Connector: Front Panel 3.5mm mini jack
- Output stage type: Unbalanced output
- Max output level: 21 dBu
- Dynamic range (unweighted): > 109 dB
- AES/EBU Digital Inputs (RJ45):
- Input stage type: Balanced input
- Input sample rate: 48 kHz or 96 kHz
- SPDIF Digital Inputs (Mono RCA):
- Input stage type: Unbalanced input
- Stereo PCM or Dolby Digital Plus (DPM300H only)
- Dimensions & Accessories:
- Dimensions (HxWxD): 3.5" (2 RU) x 19" x 15"
- Line voltage requirements: 100 VAC – 240 VAC, 50/60 Hz
- Accessories included: 6 ft UL/CSA line cord, Connector Kit
- Front Panel Controls and Indicators:
- Monitor Volume/parameter adjust: Rotary encoder
- LCD: 128 x 64 bit Monochrome LCD
- Master Mute: Push buttons
- Master Volume: Rotary encoder
- USB Type B port: Config and management interface
- Monitor output: 3.5 mm TRS
- Rear Panel Connectors:
- Network RJ45: 10/100 Mbps network management
- Automation Inputs: RJ45 – 6 contact closure inputs
- RS232: DB-9 Serial Interface
- Channels 1-8 AES/EBU Inputs: RJ45
- Channels 15-16 AES/EBU Inputs: RJ45
- SPDIF Input: RCA — Stereo digital audio interface and Lt/ Rt Matrix
- Analog Inputs (1-8): DB-25
- Line Inputs: 3.5 mm TRS — Stereo Left and Right and Lt/ Rt Matrix
- Mic/Line input: XLR — Mic (+ phantom pwr) or line level
- HDMI input/output (DPM 100H): Type A female connectors
- DataPort connectors: HD-15 (11) — QSC amplifier interface
- H.I./V.I. output: 5-pin Euro-style (x1) – common GND
- Relay outputs: 3-pin Euro-style (x2) – max 30 VDC
- Monitor Speaker:
- Speaker: 2"x 3.5" full-range
- Audio Performance:
- A/D conversion: 24-bit delta-sigma, 48 kHz
- Frequency response: 20 Hz to 20 kHz (+- .5dB)
- Inputs/Outputs:
- Main Analog Input:
- Connector: DB25F - 8 channel
- Input stage type: Active balanced input
- Input impedance: 20k Ohms
- Max analog input level: +14.2 dBu (4.0 Vrms)
- Mic/Line Input (XLR):
- Input Stage Type: Active balanced input
- Input Impedance: 2.2k Ohms
- Max Analog Input Level: 26 dBu
- Input gain: 0 to 60dB in 1 dB steps
- Phantom power voltage: 15V
- Stereo Line Inputs:
- Connector: 3.5mm TRS mini jack
- Input stage type: Unbalanced input
- Input impedance (4dBu sens): > 10k Ohms
- Max analog input level (4dBu sens): 14 dBu (4.2 Vrms)
- Input impedance (-10dBV sens): 2.7k Ohms
- Max analog input level (-10dBV sens): 0 dBV (1 Vrms)
- DataPort Outputs (HD15):
- Max output level: 14 dBu
- Dynamic range (unweighted): > 109 dB
- HI/VI Outputs:
- Connector: 5-pin Euro-style with common GND
- Output stage type: Balanced output
- Max output level: 18 dBu (adjustable)
- Monitor Headphone Output:
- Connector: Front Panel 3.5mm mini jack
- Output stage type: Unbalanced output
- Max output level: 21 dBu
- Dynamic range (unweighted): > 109 dB
- AES/EBU Digital Inputs (RJ45):
- Input stage type: Balanced input
- Input sample rate: 48 kHz or 96 kHz
- SPDIF Digital Inputs (Mono RCA):
- Input stage type: Unbalanced input
- Stereo PCM or Dolby Digital Plus (DPM300H only)
- Main Analog Input:
