Neumann U 89i Multi-Pattern Condenser Microphone - Nickel
The U 89 i is a universal studio microphone combining classic transformer coupled circuit topology with a state of the art Neumann capsule. Its linear yet smooth response has made it a prime choice for voice over and speech, but thanks to five selectable polar patterns, low noise and distortion, it covers almost any recoding situation in any genre.
Features:
- Universal studio microphone
- Five directional characteristics
- High linearity for all polar patterns
- Uncolored off-axis response
- Compact size
- Switchable pad and two-stage low cut
Specifications:
- Acoustical operating principle: Pressure gradient transducer
- Directional Pattern: Omnidirectional, wide angle, cardioid, hypercardioid, figure-8
- Frequency Range: 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm: 8 mV/Pa = −42 dBV ± 1 dB
- Rated Impedance: 150 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR: 28 dB
- Equivalent noise level, A-weighted: 17 dB-A
- Maximum SPL for THD 0.5%: 134 dB
- Maximum SPL for THD 0.5% with preattenuation: 140 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL): 66 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL): 77 dB
- Maximum output voltage: 0.3 dBu
- Supply voltage (P48, IEC 61938): 48 V ± 4 V
- Current consumption (P48, IEC 61938): 0.8 mA
- Matching connector: XLR 3 F
- Weight: 400 g
- Diameter: 46 mm
- Length: 185 mm
- Acoustical operating principle: Pressure gradient transducer
- Directional Pattern: Omnidirectional, wide angle, cardioid, hypercardioid, figure-8
- Frequency Range: 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm: 8 mV/Pa = −42 dBV ± 1 dB
- Rated Impedance: 150 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR: 28 dB
- Equivalent noise level, A-weighted: 17 dB-A
- Maximum SPL for THD 0.5%: 134 dB
- Maximum SPL for THD 0.5% with preattenuation: 140 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL): 66 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL): 77 dB
- Maximum output voltage: 0.3 dBu
- Supply voltage (P48, IEC 61938): 48 V ± 4 V
- Current consumption (P48, IEC 61938): 0.8 mA
- Matching connector: XLR 3 F
- Weight: 400 g
- Diameter: 46 mm
- Length: 185 mm
