Neumann KH-150-W-AES67 2-Way 6.5-Inch DSP-Powered Nearfield Monitor with AES67 - White
The KH 150 is a powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.
Features:
- High-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide
- Linear frequency response 39 Hz … 21 kHz (±3 dB)
- Linear phase response 105 Hz … 16 kHz (± 45°) with latency < 2,6 ms
- DSP engine allows for room adaptive calibration via Neumann’s MA 1
- Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
- May be combined with other KH line speakers in immersive/surround setups.
Specifications:
- Free field frequency response ±6 dB: 36 Hz to 21 kHz
- Free field frequency response ±3 dB: 39 Hz to 20.4 kHz
- Free field frequency linearity deviation between 100 Hz and 10 kHz: ±0.8 dB
- Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu):
- Sine wave output with THD < 0.5% at 1 m in half space: 95 dB SPL (>75 Hz)
- Max. SPL calculation in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 118.7 dB SPL
- Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 112.7 dB SPL
- Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 107.5 dB SPL
- Max. short-term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 108 dB(C) SPL
- Max. short-term SPL with music material at 2.3 m in typical listening conditions (pair / full range): 100 dB(C) SPL
- Max. short-term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 106 dB(C) SPL
- Max. long-term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 88 / 94 dB(C) SPL
- Dolby D.A.R.D.T. Max SPL full range: 114 dB
- Dolby D.A.R.D.T. Max SPL bass managed: 120 dB
- Recommended listening distance: 1.0 to 2.5 m (3' to 8')
- Feasible listening distance: 0.75 to 6.0 m (2'6" to 18')
- Acoustic principle: Bassreflex, Ports at the front
- Analog input(s): XLR, analog electronically balanced
- Analog input impedance: 24 kOhms
- Max. input level: +24 dBu for 94 dB SPL setting; +14 dBu for 100 dB SPL setting; +9 dBu for 108 dB SPL setting; -1 dBu for 114 dB SPL setting
- Common mode rejection ratio (CMRR): >56 dB @ 15kHz
- Volume control: via MA 1 software
- Volume control range; resolution: 0 … -∞ dB; 0.1 dB
- Analog dynamic range; THD+N: 118 dB, A-weighted, 90 dB
- Signal routing modes: analog, S/PDIF L, S/PDIF R, S/PDIF mono
- Digital input(s): RCA (75 Ω): S/PDIF
- Digital output(s): RCA (75 Ω): S/PDIF
- Max. Input Level; pk-pk, unbalanced / balanced: 1.2 V
- Digital converter: resolution; design: 24 Bit
- Digital converter: sampling rate: 32 kHz to 200 kHz
- Digital internal sampling rate: 48 kHz
- Output sample rate: identical to input sample rate
- Latency ADA / DA: Analog Input: 2.6 ms; SPDIF Input: 2.1 ms
- Delay: User adjustable delay range: 0 to 120 ms
- Delay: Resolution: time; distance: 20.8 µs
- Delay: Max. frames Audio-video synchronisation (lip sync): 0 to 120 ms for TOF=0ms, depends on APP implementation
- Delay: Time-of-flight maximum distance: 0 to 120 ms for lipsync=0ms, depends on APP implementation
- Input gain control (sensitivity): 0 dB ... -15 dB
- Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
- Equalization: Bass: 0; -2; -4; -6 dB; Low-Mid: 0; -2; -4; -6 dB; Treble: +1; 0; -1; -2 dB
- Input selector: Analog; S/PDIF L; S/PDIF R; Mono
- Ground Lift: Yes
- Control: Local; Network
- Mains Switch: Yes
- Mains Voltage Select: Universal Power Supply 100 V~ … 240 V~
- Controller design: Digital; active
- Crossover frequency: 1700 Hz
- Crossover slope: 24 dB / octave
- Automatic room calibration via MA 1: Yes
- FIR phase correction: Linear phase (105 Hz ... 16 kHz; +/- 45°)
- Protection circuitry: Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer
- Free field frequency response ±6 dB: 36 Hz to 21 kHz
- Free field frequency response ±3 dB: 39 Hz to 20.4 kHz
- Free field frequency linearity deviation between 100 Hz and 10 kHz: ±0.8 dB
- Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu):
- Sine wave output with THD < 0.5% at 1 m in half space: 95 dB SPL (>75 Hz)
- Max. SPL calculation in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 118.7 dB SPL
- Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 112.7 dB SPL
- Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 107.5 dB SPL
- Max. short-term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 108 dB(C) SPL
- Max. short-term SPL with music material at 2.3 m in typical listening conditions (pair / full range): 100 dB(C) SPL
- Max. short-term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 106 dB(C) SPL
- Max. long-term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 88 / 94 dB(C) SPL
- Dolby D.A.R.D.T. Max SPL full range: 114 dB
- Dolby D.A.R.D.T. Max SPL bass managed: 120 dB
- Recommended listening distance: 1.0 to 2.5 m (3' to 8')
- Feasible listening distance: 0.75 to 6.0 m (2'6" to 18')
- Acoustic principle: Bassreflex, Ports at the front
- Analog input(s): XLR, analog electronically balanced
- Analog input impedance: 24 kOhms
- Max. input level: +24 dBu for 94 dB SPL setting; +14 dBu for 100 dB SPL setting; +9 dBu for 108 dB SPL setting; -1 dBu for 114 dB SPL setting
- Common mode rejection ratio (CMRR): >56 dB @ 15kHz
- Volume control: via MA 1 software
- Volume control range; resolution: 0 … -∞ dB; 0.1 dB
- Analog dynamic range; THD+N: 118 dB, A-weighted, 90 dB
- Signal routing modes: analog, S/PDIF L, S/PDIF R, S/PDIF mono
- Digital input(s): RCA (75 Ω): S/PDIF
- Digital output(s): RCA (75 Ω): S/PDIF
- Max. Input Level; pk-pk, unbalanced / balanced: 1.2 V
- Digital converter: resolution; design: 24 Bit
- Digital converter: sampling rate: 32 kHz to 200 kHz
- Digital internal sampling rate: 48 kHz
- Output sample rate: identical to input sample rate
- Latency ADA / DA: Analog Input: 2.6 ms; SPDIF Input: 2.1 ms
- Delay: User adjustable delay range: 0 to 120 ms
- Delay: Resolution: time; distance: 20.8 µs
- Delay: Max. frames Audio-video synchronisation (lip sync): 0 to 120 ms for TOF=0ms, depends on APP implementation
- Delay: Time-of-flight maximum distance: 0 to 120 ms for lipsync=0ms, depends on APP implementation
- Input gain control (sensitivity): 0 dB ... -15 dB
- Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
- Equalization: Bass: 0; -2; -4; -6 dB; Low-Mid: 0; -2; -4; -6 dB; Treble: +1; 0; -1; -2 dB
- Input selector: Analog; S/PDIF L; S/PDIF R; Mono
- Ground Lift: Yes
- Control: Local; Network
- Mains Switch: Yes
- Mains Voltage Select: Universal Power Supply 100 V~ … 240 V~
- Controller design: Digital; active
- Crossover frequency: 1700 Hz
- Crossover slope: 24 dB / octave
- Automatic room calibration via MA 1: Yes
- FIR phase correction: Linear phase (105 Hz ... 16 kHz; +/- 45°)
- Protection circuitry: Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer
