Meyer Sound 900-LFC Low-Frequency Array Speaker/3-Pin/Remote Monitoring System/Quick-Clip Hood/Rig

More Meyer Sound products

Write a review Q&A SKU: 900-LFC-WP-3XLR-QCLIP-RIG Solotech ID#: 114642
1 of 2
Available options
Get a quote

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

Meyer Sound 900-LFC Low-Frequency Array Speaker/3-Pin/Remote Monitoring System/Quick-Clip Hood/Rig

Meyer Sound’s 900-LFC compact low-frequency control element reproduces low frequencies at high continuous output levels with extremely low distortion. The 900-LFC offers the same sonic linearity as Meyer Sound’s 1100-LFC low-frequency control element in a smaller, lighter cabinet, making it ideal for building scalable systems to suit touring applications or fixed installations of any size.

MRK-900 Rigging Kit

The optional MRK-900 rigging kit allows the 900-LFC to be flown and groundstacked with the MG-LEOPARD/900 multipurpose grid. The kit also allows 900-LFCs to be flown and groundstacked with LEOPARD with no transition hardware. The rigging kit is available as a factory-installed option or as a field upgrade and uses rugged GuideALinks and intuitive quick-release pins to securely link adjacent loudspeakers in flown and groundstacked array configurations.

900-LFC QUICK-CLIP RAIN HOOD

Weather-protected 900-LFCs include a quick-clip removable rain hood for indoor/outdoor touring and sheltered outdoor installations.

The 900-LFC quick-clip removable rain hood is easily attached and removed with its two winghead studs.

Features:

  • Compact cabinet with small footprint and extraordinary power-to-size ratio
  • High peak power output with extremely low distortion
  • Exceptional linearity, transient reproduction, and low-frequency clarity
  • Self-powered for simplified setup and increased reliability
  • Stackable and flyable in regular and cardioid arrays, with tilt and splay options
  • Integral pole-mount receptacle easily pairs the subwoofer with ULTRA Series loudspeakers

Specifications:

  • Acoustical:
    • Operating Frequency Range: 31 Hz – 125 Hz
    • Frequency Response: 32 Hz – 115 Hz ±4 dB
    • Phase Response: 40 Hz – 110 Hz ±30°
    • Linear Peak SPL: 133 dB with crest factor >10 dB (M-noise), 133 dB (Pink noise), 134.5 dB (B-noise)
  • Coverage: 360° (single unit); varies with number of units and configurations
  • Transducers:
    • Low Frequency: One 18-inch, dual-coil, long-excursion cone driver; 2Ω nominal impedance
  • Audio Input:
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
    • Connectors: XLR 3-pin female connectors available to accommodate only balanced audio (no RMS signals)
    • Input Impedance: 10 kΩ differential between pins 2 and 3
    • Wiring:
      • Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequenciess
      • Pin 2: Signal +
      • Pin 3: Signal -
      • Case: Earth ground and chassis
    • Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
    • Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeakerr
  • Amplifier:
    • Type: Two-channel, open-loop, class D
    • Total Output Power: 3100 W peak
    • THD, IM, TIM: < 0.02%
    • Cooling: Convection
  • AC Power:
    • Connectors: powerCON 20 input with loop output
    • Automatic Voltage Selection: 90–265 V AC; 50–60 Hz
    • Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
    • Turn-on and Turn-off Points: Turn-on: 90 V AC; Turn-off: none; internal fuse protection above 265 V AC
  • Current Draw:
    • Idle : 0.60 A rms (115 V AC), 0.49 A rms (230 V AC), 0.63 A rms (100 V AC)
    • Maximum Long-Term Continuous Current (>10 sec): 4.9 A rms (115 V AC); 2.5 A rms (230 V AC); 5.2 A rms (100 V AC)
    • Burst Current (<1 sec): 8.8 A rms (115 V AC), 4.7 A rms (230 V AC), 11.0 A rms (100 V AC)
    • Maximum Instantaneous Peak Current: 18.2 A peak (115 V AC), 9.2 A peak (230 V AC), 20.6 A peak (100 V AC)
    • Inrush Current: < 20.0 A peak
  • RMS Network: Equipped with two-conductor, twisted-pair network; reports all amplifier operating parameters to host computers
  • Physical:
    • Dimensions with Rigging: W: 27.47 in (698 mm) x H: 24.43 in (621 mm) x D: 24.89 in (632 mm)
    • Weight with Rigging: 159 lb (72.1 kg)
    • Enclosure: Premium multi-ply birch with slightly textured black finish
    • Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
    • Rigging: Optional end frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick release pins that allow 0°, 1.25°, 2.5°, 3.75°, or 5° splay angles; detachable side handles. Rigging supports ground-stacked, flown, and cardioid configurations.
    • Pole Mount: U.S. version: 1.5 in (38 mm), E.U. version: 1.375 in (35 mm and M20 thread at the bottom)

Reviews

Write a review

Score

Questions & Answers

Ask a question