Meyer Sound 900-LFC Low-Frequency Array Speaker - 5-Pin / Ultra Weather Protection Rain Hood - Black
Meyer Sound’s 900-LFC compact low-frequency control element reproduces low frequencies at high continuous output levels with extremely low distortion. The 900-LFC offers the same sonic linearity as Meyer Sound’s 1100-LFC low-frequency control element in a smaller, lighter cabinet, making it ideal for building scalable systems to suit touring applications or fixed installations of any size.
Features:
- Compact cabinet with small footprint and extraordinary power-to-size ratio
- High peak power output with extremely low distortion
- Exceptional linearity, transient reproduction, and low-frequency clarity
- Self-powered for simplified setup and increased reliability
- Stackable and flyable in regular and cardioid arrays, with tilt and splay options
- Integral pole-mount receptacle easily pairs the subwoofer with ULTRA Series loudspeakers
Specifications:
- Acoustical:
- Operating Frequency Range: 31 Hz – 125 Hz
- Frequency Response: 32 Hz – 115 Hz ±4 dB
- Phase Response: 40 Hz – 110 Hz ±30°
- Linear Peak SPL: 133 dB with crest factor >10 dB (M-noise), 133 dB (Pink noise), 134.5 dB (B-noise)
- Coverage: 360° (single unit); varies with number of units and configurations
- Transducers:
- Low Frequency: One 18-inch, dual-coil, long-excursion cone driver; 2Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: XLR 5-pin female input with male loop output
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequenciess
- Pin 2: Signal +
- Pin 3: Signal -
- Pin 4: RMS
- Pin 5: RMS
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeakerr
- Amplifier:
- Type: Two-channel, open-loop, class D
- Total Output Power: 3100 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Convection
- AC Power:
- Connectors: powerCON 20 input with loop output
- Automatic Voltage Selection: 90–265 V AC; 50–60 Hz
- Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
- Turn-on and Turn-off Points: Turn-on: 90 V AC; Turn-off: none; internal fuse protection above 265 V AC
- Current Draw:
- Idle : 0.60 A rms (115 V AC), 0.49 A rms (230 V AC), 0.63 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 4.9 A rms (115 V AC); 2.5 A rms (230 V AC); 5.2 A rms (100 V AC)
- Burst Current (<1 sec): 8.8 A rms (115 V AC), 4.7 A rms (230 V AC), 11.0 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 18.2 A peak (115 V AC), 9.2 A peak (230 V AC), 20.6 A peak (100 V AC)
- Inrush Current: < 20.0 A peak
- RMS Network(Optional): Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
- Physical:
- Dimensions without Rigging: W: 27.43 in (697 mm) x H: 24.43 in (621 mm) x D: 24.89 in (632 mm)
- Weight without Rigging: 136 lb (61.7 kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
- Rigging: Optional end frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick release pins that allow 0°, 1.25°, 2.5°, 3.75°, or 5° splay angles; detachable side handles. Rigging supports ground-stacked, flown, and cardioid configurations.
- Pole Mount: U.S. version: 1.5 in (38 mm), E.U. version: 1.375 in (35 mm and M20 thread at the bottom)
LEOPARD/900-LFC UW Rain Hood Attachment:
- Acoustical:
- Operating Frequency Range: 31 Hz – 125 Hz
- Frequency Response: 32 Hz – 115 Hz ±4 dB
- Phase Response: 40 Hz – 110 Hz ±30°
- Linear Peak SPL: 133 dB with crest factor >10 dB (M-noise), 133 dB (Pink noise), 134.5 dB (B-noise)
- Coverage: 360° (single unit); varies with number of units and configurations
- Transducers:
- Low Frequency: One 18-inch, dual-coil, long-excursion cone driver; 2Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: XLR 5-pin female input with male loop output
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequenciess
- Pin 2: Signal +
- Pin 3: Signal -
- Pin 4: RMS
- Pin 5: RMS
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeakerr
- Amplifier:
- Type: Two-channel, open-loop, class D
- Total Output Power: 3100 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Convection
- AC Power:
- Connectors: powerCON 20 input with loop output
- Automatic Voltage Selection: 90–265 V AC; 50–60 Hz
- Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
- Turn-on and Turn-off Points: Turn-on: 90 V AC; Turn-off: none; internal fuse protection above 265 V AC
- Current Draw:
- Idle : 0.60 A rms (115 V AC), 0.49 A rms (230 V AC), 0.63 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 4.9 A rms (115 V AC); 2.5 A rms (230 V AC); 5.2 A rms (100 V AC)
- Burst Current (<1 sec): 8.8 A rms (115 V AC), 4.7 A rms (230 V AC), 11.0 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 18.2 A peak (115 V AC), 9.2 A peak (230 V AC), 20.6 A peak (100 V AC)
- Inrush Current: < 20.0 A peak
- RMS Network(Optional): Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
- Physical:
- Dimensions without Rigging: W: 27.43 in (697 mm) x H: 24.43 in (621 mm) x D: 24.89 in (632 mm)
- Weight without Rigging: 136 lb (61.7 kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
- Rigging: Optional end frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick release pins that allow 0°, 1.25°, 2.5°, 3.75°, or 5° splay angles; detachable side handles. Rigging supports ground-stacked, flown, and cardioid configurations.
- Pole Mount: U.S. version: 1.5 in (38 mm), E.U. version: 1.375 in (35 mm and M20 thread at the bottom)
LEOPARD/900-LFC UW Rain Hood Attachment:
The Ultra Weather Protection LEOPARD/900-LFC Rain Hood Kit includes the following parts:
- LEOPARD/900-LFC Quick Clip Rain Hood with Splash Shield Assembly (PN 45.243.241.01)
- LEOPARD/900-LFC Rain Hood Baffle (PN 64.243.104.01)
- 2 pan head Phillips 6-32 x 0.25-inch 316 stainless-steel screws (PN 101.405)
The LEOPARD/900-LFC Rain Hood Baffle must be installed first.
