The RUSH Wizard is the iconic Martin Wizard Extreme re-energized: lighter, brighter, more compact and even more energy-efficient. This music triggered and DMX-Controllable "full-house" effect light, features extraordinary bright and magical effects. It features a color wheel with seven colors and a gobo wheel with 15 unique designs, as well as a shutter for strobe and pulse effects. The Wizard delivers more than 80 agile light beams, each beam chasing the other while continuously changing color and gobo patterns.
- More than 80 magical beams
- 15 gobos and 7 colors for a large variety of dance floor looks
- Unique twinkle animation effect
- 130 W short-arc discharge lamp with reflector
- 15 gobos plus open
- More than 80 magical light beams
- 7 colors + 2 open
- Shutter: Strobe effect, pulse effects, instant open and blackout
- Adjustable focus
- DMX or stand-alone mode
- Flexible mounting bracket for floor stand, wall or overhead mounting
Physical
- Length: 447 mm
- Width: 500 mm
- Height: 195 mm
- Weight: 9.3 kg including bracket
- Type: 130 W short-arc discharge with reflector
- Color temperature: 8800 K
- Average lifetime: 6000 hours - Manufacturer´s figure
- Motorized rotating parabolic mirror dish
- Motorized mirror drum: 180° pan (swivel) and 360° tilt (continuous rotation)
- Color / animation wheel: 7 colors plus 2 x open, twinkle animation effect
- Gobo wheel: 13 gobos + open, wheel scrolling and continuous rotation, shake effect
- Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
- Pre-programmed effects: Full range of macro effects
- Control options: DMX, stand-alone, master/slave
- DMX channels: 10
- Stand-alone trigger options: Music trig, auto trig
- Music trig also settable via DMX
- Setting and addressing: Control panel with backlit LCD display
- Protocol: USITT DMX512/1990
- Firmware update: Serial upload via DMX link
- Manual focus: 2 m - 20 m
- Housing: High-impact flame-retardant thermoplastic
- Color(s): Black
- Protection rating: IP20
- Mounting points: Adjustable bracket
- Orientation: Any
- Location: Indoor use only, must be fastened to surface or structure
- Minimum distance to illuminated surfaces: 0.5 m
- Minimum distance to combustible materials: 0.3 m
- Minimum clearance around fan and air vents: 0.3 m
- AC power in/thru: Neutrik PowerCon
- DMX data in/out: 5-pin locking XLR
- AC power: 100-240 V nominal, 50/60 Hz
- Typical total power consumption: 200 W
- Power consumption figures are typical, not maximum. Allow for +/-10% variation.
- 110 V, 60 Hz: 1.9 A, 200 W, PF 0.99
- 230 V, 50 Hz: 0.9 A, 196 W, PF 0.95
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C
- Minimum ambient temperature: 0° C
- Total heat dissipation (calculated, +/- 10%): 685 BTU/hr.
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
- Lamp (installed)
- Mounting bracket
- Power cable, 1.5 m, without mains plug