Leviton IED43-215 i Series Quad Dimmer, 4.0-Kilowatt, 230-Volt, 270us
SPECIFICATIONS
- Reliability and Performance with exceptional value
- The dimmer module is designed for superior reliability in the most demanding of operating conditions
- Each dimmer module also monitors its temperature and reports this information to the control module
MECHANICAL
- All dimmers are housed in removable modules made of die-cast aluminum. Each module contains 4 circuit breakers, a solid-state SCR switching device (SSR), an interface PCB, and 4 chokes. The face of the module has a handle, the circuit breaker switches, air vents and LEDs for local feedback. The left side of the module has a wide section of sprint steel to insure a proper fit for each module in the rack. All electrical contacts feature selfaligning floating connectors to insure precise alignment of all connections. All dimmer modules can be inserted and removed without the use of any tools.
ELECTRICAL
- The i Series Quad dimmer module is designed to operate on voltages ranging from 90-140VAC (120 Nominal) or 198-264VAC (230V nominal) at 47/63 Hz. The dimmer module electronics’ firing signal is optically isolated to 4,000 Volts from the power semiconductors.
- The module can also maintain proper output voltage regulation within +/- 1Volt over the line voltage range
- When dimmer is set as a non-dim, it passes on unregulated sine wave.
- Each dimmer tracks operating conditions and provides feedback to the control module which transmits the information to the user interfaces and/or the LEDs on the face of the dimmer module. Real-time feedback information includes the following data: Overtemperature Warning, Overtemperature Shutdown.
- Modules are available in 350MicroSec (120V) or 280MicroSec (230V) rise times. Oscillographic evidence of rise time data is available upon request.
- Airflow modules are required in unused slots in order to maintain proper rack ventilation.
- 120V units are UL listed and C-UL listed (for Canadian applications).
FEATURES
- Four 15 or 20 amp dimmers on a single compact chassis
- Discrete components insure high reliability
- Power regulation gives smooth consistent power output despite fluctuations in line power input
- LEDs on each module offer immediate local feedback at the rack
- Control signal is optically isolated to 4,000 Volts
- 350 microsecond rise time
- Rugged mechanical design for reliability
- “Floating” load and line connectors allow for smooth insertion and removal of the module and ensures the integrity of all power and control contacts
- User serviceable components
- UL Listed and C-UL Listed
- Latching on/off test switch for each dimming channel
- Individual module overtemp warning and shutdown feature
DIMENSIONAL DATA – IN. [CM] LBS. [KG]
-
Width: 12.5 [31.8]
-
Depth: 7.0 [17.8]
-
Height: 1.5 [3.8]
-
Weight: 7.0 [3.2]
- The i Series Quad dimmer module is designed to operate on voltages ranging from 90-140VAC (120 Nominal) or 198-264VAC (230V nominal) at 47/63 Hz. The dimmer module electronics’ firing signal is optically isolated to 4,000 Volts from the power semiconductors.
- The module can also maintain proper output voltage regulation within +/- 1Volt over the line voltage range
- When dimmer is set as a non-dim, it passes on unregulated sine wave.
- Each dimmer tracks operating conditions and provides feedback to the control module which transmits the information to the user interfaces and/or the LEDs on the face of the dimmer module. Real-time feedback information includes the following data: Overtemperature Warning, Overtemperature Shutdown.
- Modules are available in 350MicroSec (120V) or 280MicroSec (230V) rise times. Oscillographic evidence of rise time data is available upon request.
- Airflow modules are required in unused slots in order to maintain proper rack ventilation.
- 120V units are UL listed and C-UL listed (for Canadian applications).
FEATURES
- Four 15 or 20 amp dimmers on a single compact chassis
- Discrete components insure high reliability
- Power regulation gives smooth consistent power output despite fluctuations in line power input
- LEDs on each module offer immediate local feedback at the rack
- Control signal is optically isolated to 4,000 Volts
- 350 microsecond rise time
- Rugged mechanical design for reliability
- “Floating” load and line connectors allow for smooth insertion and removal of the module and ensures the integrity of all power and control contacts
- User serviceable components
- UL Listed and C-UL Listed
- Latching on/off test switch for each dimming channel
- Individual module overtemp warning and shutdown feature
DIMENSIONAL DATA – IN. [CM] LBS. [KG]
-
Width: 12.5 [31.8]
-
Depth: 7.0 [17.8]
-
Height: 1.5 [3.8]
-
Weight: 7.0 [3.2]
- Width: 12.5 [31.8]
- Depth: 7.0 [17.8]
- Height: 1.5 [3.8]
- Weight: 7.0 [3.2]
