ETC LED10 Dual 120-Volt PhaseAdept Module
Use ETC's dual-density PhaseAdept Dimmer Module to step up LED capabilities in any ETC power enclosure. Designed to be specifically compatible with LED fixtures and replacement lamps, PhaseAdept Modules provide forward or reverse phase angle dimming and feature a high-density modular assembly, fully-magnetic and fully-rated circuit breakers. Phase angles and min scale are available electronically (when used with Sensor 3 and DRd enclosures: CEM3, E-ACP, or P-ACP controllers) or manually (when used with Sensor, Sensor+, Unison DR, and Unison DRd with SmartLink: MPE , CEM, CEM+, S-ACP, CMd, or CMEd control processor).
Features:
- High-performance dimming of LED loads compatible with ETC Sensor or Unison rack
- Two dimmers per module
- High-density modular assembly
- Fully-rated circuit breakers
- Min scale controls
- Forward- or reverse-phase dimming
- UL and cUL LISTED and CE compliant
Specifications:
- General:
- Dual-density, plug in modules, for use in any Sensor or Unison power enclosure
- Provides forward- or reverse-phase angle dimming for LEDs and electronic low-voltage transformers
- UL and cUL Listed for continuous duty at 100% of rated load
- Physical:
- Modular plug-in assemblies
- Cast aluminum chassis, finished with textured epoxy paint
- Circuit Breakers:
- Fully magnetic to eliminate nuisance tripping
- 10x inrush current rating
- 125%, 10-120 seconds, must-trip rating
- Rated for 100% switching duty applications
- Electrical:
- Modules available for dimmer racks with the following mains feeds:
- 100V - dual 10A
- 120V - dual 10A
- 230V - dual 6A
- 240V - dual 6A
- 240V Delta - dual, 6A total load
- 277V - dual 5A
- 1W minimum load
- 100,000A Short Circuit Current Rating (SCCR)
- Modules withstand hot-patching of cold loads up to full rating
- Not suitable for use with magnetic loads
- Power Device:
- Sealed, patented assembly
- Per-circuit LED indicators
- Integral bonded heatsink
- Integral temperature sensor
- Filtering: High quality toroidal filters (see module chart for rise times)
- Low Voltage Dimming:
- PhaseAdept modules provide forward- or reverse-phase dimming and are compatible with any ETC dimmer rack
- Phase dimming performance for LED lamps varies considerably depending on the manufacturer and model.
- General:
- Dual-density, plug in modules, for use in any Sensor or Unison power enclosure
- Provides forward- or reverse-phase angle dimming for LEDs and electronic low-voltage transformers
- UL and cUL Listed for continuous duty at 100% of rated load
- Physical:
- Modular plug-in assemblies
- Cast aluminum chassis, finished with textured epoxy paint
- Circuit Breakers:
- Fully magnetic to eliminate nuisance tripping
- 10x inrush current rating
- 125%, 10-120 seconds, must-trip rating
- Rated for 100% switching duty applications
- Electrical:
- Modules available for dimmer racks with the following mains feeds:
- 100V - dual 10A
- 120V - dual 10A
- 230V - dual 6A
- 240V - dual 6A
- 240V Delta - dual, 6A total load
- 277V - dual 5A
- 1W minimum load
- 100,000A Short Circuit Current Rating (SCCR)
- Modules withstand hot-patching of cold loads up to full rating
- Not suitable for use with magnetic loads
- Modules available for dimmer racks with the following mains feeds:
- Power Device:
- Sealed, patented assembly
- Per-circuit LED indicators
- Integral bonded heatsink
- Integral temperature sensor
- Filtering: High quality toroidal filters (see module chart for rise times)
- Low Voltage Dimming:
- PhaseAdept modules provide forward- or reverse-phase dimming and are compatible with any ETC dimmer rack
- Phase dimming performance for LED lamps varies considerably depending on the manufacturer and model.
