Audio Technica ATW251 Wireless Unipack System Alternatives

Audio Technica ATW251 Wireless Unipack System

More Audio Technica products

Write a review Q&A SKU: ATW-251 Solotech ID#: 52184
1 of 1
Unfortunately the Audio Technica ATW251 Wireless Unipack System is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

View full details
Unfortunately the Audio Technica ATW251 Wireless Unipack System is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

Description

ATW-R250 receiver and ATW-T201 transmitter

Audio-Technica's Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

Features:
  • Easy operation and clear, natural sound quality
  • Reliable performance and durable construction
  • Advanced dipole antenna system for extended operating range
  • Power, RF, and AF Peak indicators
  • Volume control, 1/4" output jack and space-saving power supply
  • Rugged unidirectional dynamic element on handheld microphone/transmitter
  • Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
  • Professional locking connector on UniPak® body-pack transmitter
RECEIVER SPECIFICATIONS
  • Receiving System - Non-diversity, single-channel, dual antenna system
  • Image Rejection - 50 dB minimum
  • Signal-to-noise Ratio - 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
  • Sensitivity - 20 dBµV for 60 dB S/N (IEC-weighted)
  • Audio Output - 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
  • Output Connector - 1/4" TS ("mono") phone jack
  • Power Supply - 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
  • Dimensions - 7.48" W x 1.65" H x 5.12" D
  • Net Weight - 11.0 oz (311 g)
  • Accessory Included - Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS
  • RF Power Output - 10 mW High position, 2 mW Low position, typical
  • Spurious Emissions - Under federal regulations
  • Input Connections - High impedance, low impedance, bias
  • Battery - 9V (NEDA type 1604) alkaline, not included
  • Current Consumption - 30 mA typical
  • Battery Life - Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern)
  • Dimensions - 2.56" W x 4.33" H x 1.00" D
  • Net Weight - 2.8 oz (78 g) (without battery)

Reviews

Write a review

Score

Questions & Answers

Ask a question