Audio Technica ATW-2110BI Wireless UniPak System

Audio-Technica’s 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. Features switchable antenna power. Also, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a body-pack transmitters in any combination.

Offering 10 selectable channels and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock™ squelch plus an easy-to-read LCD information display.

ATW-R2100b receiver and ATW-T210a body-pack transmitter.

Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.

Features:

• Serious advances in affordable professional wireless
• Clear sound quality and rock-solid, dependable performance
• Automatic frequency scanning
• 10 compatible user-switchable channels
• Antenna power available for powered antennas & other in-line RF devices
• True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
• Tone Lock™ tone squelch system fights interference
• Rugged metal half-rack receiver with soft-touch controls and LCD display
• Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
• Switchable transmitter power output with high and low settings offered
• Includes rack-mount kit and detachable UHF antennas
• Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

Specifications:

• Operating Frequencies: Band I : 487.125 to 506.500 MHz
• Number of Channels: 10 total
• Modulation Mode: FM
• Maximum Deviation: ±40 kHz
• Dynamic Range: > 110 dB (A-weighted), typical
• Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
• Operating Range: 100 m (300'), typical

Open range environment with no interfering signals.

• Operating Temperature Range:
  • 5º C to 45º C
  • 41º F to 113º F

  Battery and LCD performance may be reduced at very low temperatures.

• Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)

Receiver Specifications:

• Receiving System: True diversity
• Image Rejection: 60 dB nominal, 55 dB minimum
• RF Sensitivity:
  • 20 dBuV at 60 dB S/N ratio
  • (50 ohms termination)
• Antenna Input:
  • BNC-type, 50 ohms
  • Bias voltage 12V DC, 60 mA, each
• Power Requirements: 12-18V DC, 500 mA
• Dimensions:
  • 210.0 mm (8.27") W x
  • 162.2 mm (6.39") D x
  • 44.0 mm (1.73") H

Not including BNC connectors or feet.

• Net Weight: 1.0 kg (35.3 oz), without accessories
• Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

Addtional Receiver Specifications:

• Maximum Output Level:
  • XLR, balanced: +9 dBV
  • ¼" (6.3 mm), unbalanced: +4 dBV
• Balanced Audio Output Attenuator:
  • Two position switch: 0 / -12 dB

Body-Pack Transmitter Specifications:

• RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
• Spurious Emissions: Following federal and national regulations
• Input Connections:Four-pin Locking Connector
  • Pin 1: GND
  • Pin 2: INST Input
  • Pin 3: MIC Input
  • Pin 4: DC Bias +9V
• Batteries: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)

Recharging power for NiMH batteries (with ATW-CHG2)

U.S./Canada/Latin America: 3.2 V DC, 230 mA x2

Other world areas: 3.2 V DC, 320 mA x2

• Battery Life:
  • High: 7 hours (alkaline)
  • Low: 9 hours (alkaline)

Depending on battery type and use pattern.

Handheld Transmitter Specifications:

Recharging power for NiMH batteries (with ATW-CHG2)

U.S./Canada/Latin America: 3.2 V DC, 230 mA x2

Other world areas: 3.2 V DC, 320 mA x2

Depending on battery type and use pattern.