ETC Source 4WRD PAR

The Source 4WRD PAR transforms your Source 4WRD II LED into a versatile soft light fixture. 

The Source 4WRD PAR runs at 575 watts, and it matches the output of traditional 1000W PAR64s while consuming 40% less energy.

The Source 4WRD PAR is available in black, silver or white.

Features:

• Fixture bodies for use with Source 4WRD II LED
• Works just like a Source Four PAR, using the same accessories
• 155 W at full output
• Brighter than the 750 W HPL versions
• Uses same Source 4WRD II LED as the Source 4WRD II ellipsoidal

Specifications:

• Source:
  • LED details: S4WRD LED (48 Cree LEDs) *Not Included*
  • Max lumens: 10,569 (PAR)
  • Lumens per watt: 68 (PAR)
  • L70 rating (hours to 70% output): 45,000 hours (LM84 test pending)
  • Notes: S4WRD LED sold separately
• Colour:
  • Colours used: Warm or Cool White
  • Colour temperature range: 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
  • Calibrated array: No
  • Red shift: No
  • Notes: S4WRD is available in 80+ CRI (Standard) and 90+ CRI (Gallery)
• Optical:
  • Beam angle range-PAR: 19.5°–62°
  • Gate size: N/A
  • Aperture size: 7 in
  • Pattern projection: No
  • Pattern size: N/A
  • Camera flicker control/Hz range: No
  • Notes: PAR ships with an AR coated flat lens. Additional PAR lenses sold separately.
• Control:
  • Input method: DMX Control or Line Dimmed
  • Protocols: DMX / RDM via RJ45
  • Modes (Footprint): 1 Channel (Intensity) for DMX
  • RDM configuration: Yes
  • UI type: 7-segment address display, local level control via UI
  • Local control: Yes
  • Onboard pre-sets: No
  • Onboard sequences: No
  • Onboard effects: No
  • Fixture to fixture control: No
• Electrical:
  • Voltage range: 209–252 V, 50 Hz (230 V)
  • Input method: Hard-wired, 1 m cord, bare end (230 V)
  • Inrush: 12 A (first half-cycle) at 230 V
  • Fixtures per circuit: 6 fixtures per non-dimmed circuit (ER15AFR module)
  • Wattage (Typical/Standby): 175 W / 3.7 W (230 V)
  • Current draw: 0.75 A at 230 V
  • Notes: When using line dimming, see the S4WRD Manual for dimmer setup When using line dimming, standby power is 0 W
• Thermal:
  • Ambient operating temp: 5°–50° C (41°–122° F)
  • Fan (controllable): Yes (no)
  • Droop compensation: No
  • dB range: 28 dBa average at 1 m
  • BTUs/hour: 529
• Physical:
  • Materials: Die-cast aluminium
  • Colour options: Black
  • Mounting options: Yoke
  • IP rating: IP-20
  • Weight: PAR: 3.0 kg (6.6 lb)
  • Included accessories: Colour frame
  • Notes: Includes S4WRD mounting post. Required S4WRD LED available separately
• Warranty:
  • Fixture body: 5 years
  • LED array: 10 years