ETC Desire D40XT Vivid LED Par

The D40XT Vivid uses a x7 Colour System array and has a usage rating of IP66 (exterior) that comes with an outdoor-rated power lead with watertight Molex connector.

The D40XT fixture is able to withstand heat, cold, rain and snow, meaning that the unit’s housing completely protects the electrical components from dust, water and the formation of ice, and can withstand temperatures ranging from -20°C to 40°C (-4°F to 104°F).

The D40XT Vivid is available black, silver or white.

Features:

• UL 1573-rated for stage and studio use
• IP66-rated for exterior, wet-location use
• Power pass-through and DMX in/thru connections for easy setup
• User-friendly control interface with multiple DMX profiles and fixture settings
• 50,000-hour LED life
• Primary field angle of 17°
• Secondary lenses available for multiple beam spread options; round-pattern diffusers can be factory-installed for permanent installations

Specifications:

• General:
  • 40 X 2.5W LED variable colour-mixing light wash fixture
  • ETL listed to UL1573 – the standard for stage and studio lighting units
  • IP66-rated for exterior wet location use
  • Power and DMX in/thru connections for easy setup
  • User-friendly control interface with multiple modes and fixture settings
• Physical:
  • Rugged die-cast all-metal housing
  • Easy access slots for secondary lenses and standard 7.5”
• PAR accessories:
  • Available in black (standard), white or silver (optional) or custom colours (contact factory)
  • Hanging yoke standard. Optional yoke/floor stand available
  • Effective Projected Area (EPA): 0.74
• Electrical:
  • 100VAC to 240VAC 50/60 Hz universal power input
  • Waterproof, 39”power in and thru outdoor rated power leads
  • Up to 10 fixtures may be linked via power in/thru connections per 15Acircuit
  • •Requires power from a non-dim source
• LED:
  • 50,000 hour LED life (50,000 hours to 70% intensity)
  • 40 Luxeon® Rebel 2.5W LED emitters
  • All LED sources experience some lessening of light output and some colour shift over time. LED output will vary with thermal conditions. Based on the LED manufacturer’s B50 L70 specification, a Selador luminaire will achieve ~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in colour performance, necessitating slight adjustment to presets, cues or programs.
• Colour:
  • Exclusive x7 Colour System™ seven-colour LED array
  • Broad spectrum colour interacts seamlessly with conventional sources
  • Beautifully illuminates skin tones and other objects for natural appearance and high colour rendering
  • Exclusive red-shift option emulates tungsten dimming performance
• Optical:
  • Primary field angle of 17° and beam angle of 8°
  • Secondary lenses available for multiple beam spread options
  • Sealed, factory-installed lenses available for permanent installations (special order)
  • Lenses must be ordered separately
  • Refer to accessories chart for lenses available
• Control:
  • DMX512 in and thru via watertight five-pin XLR connectors on 39” leads
  • Multiple control options including RGB, strobe, and console-free Master/Slave mode
  • See DMX Control Table for additional information
  • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes colour shift during dimming
  • RDM functionality for address and setting changes
• Thermal:
  • Ambient operating temperature of -4° to 104°F (-20° to 40°C)
  • Active electronic thermal management for droop-free operation
  • Noiseless, fan-free convection cooling for acoustically sensitive installations
  • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
• Physical:
  • Weight* 14 lbs / 6.4 kg
  • Shipping Weight 17 lbs / 7.8 kg
  • *Does not include mounting hardware