Solaris Flare Q+ LED RGBW Strobe

Solaris Flare indoor LED fixtures are combination wash/strobe/blinders with over 1000 Watts of LED RGBW brightness, 58,000 lumens, instantaneous color mixing, and 1200Hz refresh rate for smooth on-camera dimming. Q+ Technology increases the brightness with practically no fan noise. Its “Theatre Mode” is effectively silent, yet still 8% brighter than the original Flare! One Solaris Flare LED fixture does the job of many conventional LED fixtures, saving setup time and labor.

Features:

• 96 10W RGBW Cree® LEDs, divided into 2, 3, 4, 6 or 12 pixels
• Variable intensity control 0-100% in 8bit or 16bit control modes
• Beam spread: 36° standard. Optional beam widths available: 20°, 54°, and 70°1
• Refresh rate: 1200HZ
• Flash Duration control 0-650ms flashes per second
• Flash Rate control 0-16.7Hz (50Hz) / 0-20Hz (60Hz)
• Continuous blinder/wash effect
• Flash intensity curve selection
• User definable fades
• LCD control panel display with four control buttons
• RDM available in Flare RDM, Flare Jr, Flare Q+ and Flare Q+ LR (not available in early versions of the original Flare)

Specifications:

• Weight / Dimensions:
  • Length: 19.7” (500 mm)
  • Width: 6.5” (164 mm)
  • Height (w/yoke): 10” (257 mm)
  • Weight: 22 lb.(10 kg)
• Power:
  • Operating Voltage: 100-277VAC 50/60Hz
  • Fuse: 12A 250V slow-blow (5x20 mm)
  • Power Consumption: 1250 W
• Light Source:
  • LEDs: 96 10W RBGW Cree LEDs, divided into 12 segments
  • Color: RGBW
  • Beam spread: 36°
• Thermal:
  • Max. ambient temperature: +104 °F (+40 °C)
  • Min. ambient temperature: -13 °F (-25 °C)
  • Cooling: air cooled – fan
• Control / Programming:
  • DMX input: locking 5-pin XLR male socket
  • DMX output: locking 5-pin XLR female socket
  • DMX pin config: pin 1 shield, pin 2 (-), pin 3 (+), pin 4 n/a, pin 5 n/a
  • Control: RDM, DMX-512, Demo, Manual mode
  • DMX Channels – Basic Mode: 3, 4, 6, 7, 8
  • DMX Channels - Advanced Mode: 10,12,13,16,19,20,24,25,32,43,56
  • Power Connector: Input: PowerCon 20A