{"product_id":"radial-x-amp-reamper","title":"Radial X-Amp Reamper","description":"\u003ch2\u003eRadial X-Amp Active Reamp\u003c\/h2\u003e\n\u003ch3\u003eActive Reamp\u003c\/h3\u003e\n\u003cp\u003eThe Radial X-Amp™ is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReamp for professionals \u003c\/strong\u003e\u003cbr\u003eFollowing the critically acclaimed Radial JD7™ Injector, the X-Amp employs a unique class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180° polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX-Amp Applications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReamping Step-1\u003c\/strong\u003e\u003cbr\u003eTo Reamp, start by recording a dry track using a Radial J48 and splitting the signal. Record the wet track using a mic so that the guitarist can hear it. Send him to the beach!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReamping Step-2\u003c\/strong\u003e\u003cbr\u003eSend the dry track back to the guitar amps and pedals using the X-Amp. Adjust the tone and move the mics around till it sounds right. You can always come back and Reamp later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReamping – Not just for guitars!\u003c\/strong\u003e\u003cbr\u003eTry sending a vocal track into a Marshall® amp or a Tonebone Classic-V9™ to add tube warmth and grit. Take it a step further by sending your kick drum to a wah pedal. There are no limits!\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eActive Reamp® with two outputs\u003c\/li\u003e\n\u003cli\u003e100% discrete class-A signal path\u003c\/li\u003e\n\u003cli\u003eTransformer isolated to eliminate noise\u003c\/li\u003e\n\u003cli\u003eLED peak indicator and level control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLR In \u003c\/strong\u003e\u003cbr\u003eBalanced +4dB line level input is used to receive the audio signal from the recorder. Follows AES standard with pin-1 ground, pin-2 hot (+), pin-3 cold (-).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround\u003c\/strong\u003e\u003cbr\u003eLifts pin-1 ground on the XLR input, diverting the ground connection to the ¼\" OUT-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Slip Pad\u003c\/strong\u003e\u003cbr\u003eNeoprene isolation pad provides electrical isolation from the chassis and mechanical insulation from rough handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower LED\u003c\/strong\u003e\u003cbr\u003eAutomatically illuminates when the power supply is connected. Lets you know the X-Amp is on and ready to use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel\u003c\/strong\u003e\u003cbr\u003eLets you adjust the X-Amp output level going to the amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip LED\u003c\/strong\u003e\u003cbr\u003eProvides visual cue of input signal. When this light goes on, turn down the source! You are overloading the X-Amp input circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-1\u003c\/strong\u003e\u003cbr\u003eDirect buffered output is used to feed your first amp. This should be a properly grounded amp that has passed local safety approvals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180º Polarity\u003c\/strong\u003e\u003cbr\u003eReverses the absolute phase on output 2 so that both amplifiers play in phase. It can also be used to create different effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-2\u003c\/strong\u003e\u003cbr\u003eTransformer isolated output is used to feed your second amp while eliminating ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e\u003cbr\u003eNylon XLR connector with extra large nickel-silver pin contacts. Tougher than steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Discrete\u003c\/strong\u003e\u003cbr\u003eFull sized parts are hand inserted to deliver the very best audio quality. Class-A circuit design for pure tone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer\u003c\/strong\u003e\u003cbr\u003eProvides 100% isolation to eliminate hum and noise caused by ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Lift\u003c\/strong\u003e\u003cbr\u003eApplies to guitar amp output 2 - provides alternate ground path if needed or can help eliminate ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Board\u003c\/strong\u003e\u003cbr\u003eDouble-sided military spec for greater durability and full ground plane to reduce radio frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Gauge Steel\u003c\/strong\u003e\u003cbr\u003eI-Beam construction prevents circuit board from torque which could lead to part failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: 100% discrete class-A\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz ~ 15kHz (± 1.0dB)\u003c\/li\u003e\n\u003cli\u003eDynamic range: 119dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: 0.02% @ -15dBu\u003c\/li\u003e\n\u003cli\u003eIntermodulation Distortion: 0.02% @ -20dBu\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 600 ohms\u003c\/li\u003e\n\u003cli\u003eNoise: OUT-1 -110dB; OUT-2 -108dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +22dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e180° polarity reverse, Ground lift, Level Control\u003c\/li\u003e\n\u003cli\u003eInput Connectors: XLR\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: 1\/4\" Isolated and Direct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eGeneral \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: 14 gauge steel chassis \u0026amp; outer shell\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): 3.3\" x 5.0\" x 2\" (84 x 127 x 48mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.55lb (720g)\u003c\/li\u003e\n\u003cli\u003eShipping size (L x W x D): 5\" x 2.75\" x 10.75\" (127 x 70 x 273mm)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 2.6lbs. (1.18kg)\u003c\/li\u003e\n\u003cli\u003ePower: +15VDC\/400mA adapter included\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5°C and 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"815\" height=\"458\" src=\"https:\/\/www.youtube.com\/embed\/9-2ipA5t2qE\" title=\"Reamp® Academy: How to Reamp®\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"New","offer_id":31595539955760,"sku":"X-AMP","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Touring Gear - Used","offer_id":40822687465666,"sku":"TZ-X-AMP","price":0.0,"currency_code":"USD","in_stock":true},{"title":"Ready to Go - Used - Only Available in Canada","offer_id":45335113400514,"sku":"RTG-X-AMP","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/X-AMP.jpg?v=1582410715","url":"https:\/\/shop.solotech.com\/products\/radial-x-amp-reamper","provider":"Solotech","version":"1.0","type":"link"}