{"product_id":"radial-lx-3-line-level-splitter","title":"Radial LX-3 Line-Level Splitter","description":"\u003ch2\u003eRadial LX-3 Line-Level Splitter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePassive Line-Level Splitter\u003c\/strong\u003eThe Radial LX-3ô is a high-performance balanced line-level splitter designed to send one audio signal to as many as three destinations at once.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePristine audio splitting\u003c\/strong\u003eThe LX-3 makes use of a premium Jensen transformer to leverage the industry's best combination of frequency response, signal level handling, and low distortion, providing the highest possible signal quality. It features two isolated outputs to eliminate hum and buzz from ground loops, along with a third direct output. All three XLR outputs have ground lift switches for additional noise suppression, and a switchable -12dB input pad allows you to connect even the hottest line outputs without fear of overloading or distortion. The input of the LX-3 is accessed with an XLR\/TRS combo jack, which allows you to connect via balanced or unbalanced cables; the LX-3 will automatically balance the signal at the isolated outputs, preventing interference and signal degradation over long cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend one mono signal to multiple headphone mixes\u003c\/strong\u003eSplit a click track output to three personal monitor mixers on stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSplit the output of a mic preamp in the studio\u003c\/strong\u003eSend the output of a single preamp to three different compressors or effects units, opening the door to numerous creative possibilities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSplit a mono console feed to multiple devices\u003c\/strong\u003eSend production audio or a live board feed to up to three different portable recording devices at once.\u003c\/p\u003e\n\u003cp\u003eSend one audio signal to three destinations simultaneously.\u003c\/p\u003e\n\u003cp\u003eJensen transformer-equipped for exceptional audio quality.\u003c\/p\u003e\n\u003cp\u003eEliminates hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003cp\u003eCombo jack input for 1\/4? TRS or XLR sources.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput Pad:Reduces the input by -12dB to allow for extra-hot line-level signals to be connected.\u003c\/li\u003e\n\u003cli\u003eCombo Input: Combination XLR or 1\/4\" input.\u003c\/li\u003e\n\u003cli\u003eGround Lift: Disconnects pin-1 ground at the XLR output.\u003c\/li\u003e\n\u003cli\u003eThru: Direct output to connect to a third destination.\u003c\/li\u003e\n\u003cli\u003eIso Outputs: Transformer isolated outputs help eliminate hum and buzz caused by ground loops.\u003c\/li\u003e\n\u003cli\u003eGround Lift: Disconnects pin-1 ground at the XLR output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: Passive, transformer based\u003c\/li\u003e\n\u003cli\u003eTransformer: Jensen JT-123-FLPCH\u003c\/li\u003e\n\u003cli\u003eNumber of channels: 1 In, 3 Out\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz - 20kHz +\/-0.5dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 140dB\u003c\/li\u003e\n\u003cli\u003eGain: -1.5dBu\u003c\/li\u003e\n\u003cli\u003ePhase Deviation: +0.6? @ 20Hz\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 712 ohms\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 112 ohms\u003c\/li\u003e\n\u003cli\u003eCommon Mode Rejection Ratio: 105dB @ 60Hz, 70dB @3kHz\u003c\/li\u003e\n\u003cli\u003eNoise: -120dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +20dBu\u003c\/li\u003e\n\u003cli\u003eInput pad, Ground lift\u003c\/li\u003e\n\u003cli\u003eInput Connectors: Combo XLR \/ 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: XLR iso and direct\u003c\/li\u003e\n\u003cli\u003eConstruction: 14-gauge steel\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): 84mm x 127mm x 48mm (3.3\" x 5\" x 2\")\u003c\/li\u003e\n\u003cli\u003eWeight: 0.7kg (1.5lbs)\u003c\/li\u003e\n\u003cli\u003eShipping size (L x W x D): 102 x 76 x 165mm (4\" x 3\" x 6.5\")\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.87 kg (1.92 lbs)\u003c\/li\u003e\n\u003cli\u003ePower: Passive, no power required\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5?C and 40?C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"New","offer_id":31592281964592,"sku":"LX3","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/LX3.jpg?v=1582417794","url":"https:\/\/shop.solotech.com\/products\/radial-lx-3-line-level-splitter","provider":"Solotech","version":"1.0","type":"link"}