Martin JEM Roadie Compact DMX Dense Fog Machine

Martin JEM Roadie Compact DMX Dense Fog Machine

Martin's industry-standard Jem Roadie X-Stream is now available in a high-output, compact version.

• Onboard DMX, 3 and 5 pin
• Pre-programmed stand-alone macros
• On-board control panel
• For vertical or horizontal effect projection
• Output and density level control
• Continuous output
• 2500 m³/min fog output Integrated high velocity fan
• 2 x 1500 W heat exchanger
• 9 min heat-up time
• 9.5 liter fluid capacity
• Low fluid sensing

• Max. fog output (approx.): 2500 m3 per minute
• Max. operating time at full output (approx.): 90 minutes
• Operating time: Continuous, automatic level adjustment
• Warm-up time (approx.): 9 minutes

• Control options: Onboard control panel, DMX
• Compatible remote controls: For limited control
• DMX channels: 2 (output and fan)
• Protocol: USITT DMX512/1990

• Housing: Steel and aluminum
• Heat exchanger: 2 x 1500 W, direct thermal protection

• Fluid pump: Oscillating piston, high pressure X2
• Onboard fluid capacity: 9.5 l
• Fluid consumption at peak output: 220 ml per minute

• Orientation: Floor mount (Horizontal or vertical) or flying kit

• Remote control: 3-pin locking XLR
• DMX data: 3-pin and 5-pin XLR sockets
• Power cable entry: Hard-wired

• AC power: 208 V 60 Hz / 220 - 240 V 50 Hz
• Main fuse (208-240 V power): Onboard 16 A Breaker

• 208 V, 60 Hz: 2450 W, 12.7 A
• 220 V, 50 Hz: 2745 W, 12.5 A
• 230 V, 50 Hz: 3000 W, 13.04 A
• 240 V, 50 Hz: 3267 W, 13.6 A
• Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

• Maximum ambient temperature (Ta max.): 40° C
• Exterior surface temperature, steady state: 50° C
• Max. nozzle temperature: 200° C

• User manual
• Container 9.5 l
• Hard wired mains cable 2 m: Pre-Installed
• Flying kit: Pre-Installed

• Length: 800 mm
• Width: 500 mm
• Height: 600 mm
• Dry weight: 80 kg