{"product_id":"jbl-control-31-control-contractor-on-wall-speaker","title":"JBL CONTROL 31 Control Contractor On-Wall Speaker","description":"\u003ch2\u003eJBL CONTROL 31 Control Contractor On-Wall Speaker\u003c\/h2\u003e\n\u003cp\u003eThe CONTROL 31 is a two-way high-output indoor-outdoor monitor speaker.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 250 mm (10 in) woven fiberglass cone LF driver with 52 mm (2 in) voicecoil., High-output 2414H-C compression driver with 25 mm (1 in) exit, unique (patented) design and high-temperature polymer diaphragm.\u003c\/li\u003e\n\u003cli\u003e250 Watt capability (in 8? thru setting), plus 150 Watt transformer for 70V or 100V distributed lines, with 8? thru bypass.\u003c\/li\u003e\n\u003cli\u003eExtended bandwidth, extremely smooth frequency response\u003c\/li\u003e\n\u003cli\u003eHighly outdoor-capable design with included WeatherMax™ multi-layer grille and optional marine-kit grille for salt-air environments.\u003c\/li\u003e\n\u003cli\u003e110° x 110° symmetrical coverage.\u003c\/li\u003e\n\u003cli\u003eIncludes InvisiBall® mounting hardware plus ten 6 mm attachment points for suspension and optional U-bracket.\u003c\/li\u003e\n\u003cli\u003eIncluded sealed input panel cover and screw-down input terminals for secure connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Range (-10 dB): 33Hz – 19kHz\u003c\/li\u003e\n\u003cli\u003eFrequency Response (±3 dB): 42Hz – 14kHz\u003c\/li\u003e\n\u003cli\u003ePower Ratings: 250 W (1000 W peak), 2 hrs. 200 W (800 W peak), 100 hrs.\u003c\/li\u003e\n\u003cli\u003eMaximum SPL @ 1m: 116 dB continuous (123 dB peak)\u003c\/li\u003e\n\u003cli\u003eNominal Sensitivity: 92 dB\u003c\/li\u003e\n\u003cli\u003eCoverage Angle: 110° x 110°\u003c\/li\u003e\n\u003cli\u003eDirectivity Factor (Q): 5.7, averaged 500 Hz to 10 kHz\u003c\/li\u003e\n\u003cli\u003eDirectivity Index (DI): 7.3 dB, averaged 500 Hz to 10 kHz\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003eCrossover Type: 2nd order low-pass, 2nd order high-pass, plus conjugate shaping circuitry.\u003c\/li\u003e\n\u003cli\u003eTransformer Taps: 70V: 150W, 75W, 38W, 19W 100V: 150W, 75W, 38W Insertion Loss: \u0026lt;0.65 dB at any tap setting Thru Setting: 8? nominal\u003c\/li\u003e\n\u003cli\u003eRecommended High-Pass: Protective 40 Hz high-pass (24 dB\/oct) for any transformer tap and for 8? operation\u003c\/li\u003e\n\u003cli\u003eLow Frequency: 250 mm (10 in) woven-fiberglass cone with pure butyl rubber surround, 52 mm (2 in) voice coil on high-temperature fiberglass voice coil former, optimized cone geometry, linear suspension spider, FEA-optimized motor construction, aluminum ring on pole piece.\u003c\/li\u003e\n\u003cli\u003eHigh Frequency: JBL 2414H-C compression driver with 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, JBL-patented design, fluid-cooled.\u003c\/li\u003e\n\u003cli\u003eEnclosure Material: High impact Polystyrene (HIPS) with 10% glass fill plus patent-pending internal 5 mm foamed polyurethane secondary mold for additional cabinet density.\u003c\/li\u003e\n\u003cli\u003eGrille: Zinc-plated and thermoset-composite coated steel, WeatherMax™ multi-layer foam with tight-weave mesh vapor barrier.\u003c\/li\u003e\n\u003cli\u003eInstallation: InvisiBall wall-mounting system included. Ten 6 mm attachment points on cabinet for suspending or for optional U-bracket. One 6 mm secondary safety attachment point (for forged shoulder steel eyebolt, not included) on back panel.\u003c\/li\u003e\n\u003cli\u003eEnvironmental: IP-55 per IEC529. Exceeds MilSpec 810 for humidity, salt-spray, temperature \u0026amp; UV. Passes MilStd-202F for salt spray. Optional MTC-30MK marine-kit grille increases longevity in highly corrosive environments.\u003c\/li\u003e\n\u003cli\u003eTermination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG \/ 2.5 mm2).\u003c\/li\u003e\n\u003cli\u003eAgency Rating: Transformer is listed per UL1876\u003c\/li\u003e\n\u003cli\u003eColors: Black (RAL9004) or white (-WH, RAL9003)\u003c\/li\u003e\n\u003cli\u003eDimensions: 593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight (ea): 18.8 kg (41.5 lbs.)\u003c\/li\u003e\n\u003cli\u003eIncluded Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall wall-mounting system, 6 mm x 305 mm InvisiBall hex wrench.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JBL Pro","offers":[{"title":"New","offer_id":31589430820912,"sku":"CONTROL-31","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/CONTROL-31.jpg?v=1582647291","url":"https:\/\/shop.solotech.com\/products\/jbl-control-31-control-contractor-on-wall-speaker","provider":"Solotech","version":"1.0","type":"link"}