Electro Voice ND408A Dynamic Microphone
The Electro-Voice N/D408A is a supercardioid dynamic microphone utilizing a revolutionary neodymium alloy to form the EV-exclusive N/DYM® magnet with four times the power potential of conventional microphone magnets. With a computer-optimized design, the N/DYM magnetic structure is maximized in the N/D408A to provide 6-dB more output sensitivity over conventional designs while the more uniform magnetic field lowers distortion during peak sound pressure levels. The large diaphragm contains 50 percent more surface area than conventional designs and is reinforced to prevent "breakup." The result is an extended high-frequency response with an open, transparent sound quality. The exceptional sensitivity of the N/D408A combined with the inherently low noise of a dynamic transducer insures a superior signal-to-noise ratio ready for digital recording and sampling. To further reduce noise, a highly effective hum-bucking coil is used to cancel hum from lighting and other sources. N/DYM® Series II microphones feature Dyna Damp™ , an advanced vibration-isolation material. DynaDamp™ is a unique foamed elastomer, specifically formulated for vibration control. DynaDamp™ forms an advanced-technology vibration-isolation system which dramatically reduces all forms of vibration transmitted noise for the most demanding situations. The N/DYM® Series II pop filter incorporated a special molded retainer which insures optimum placement of the Acoustifoam™ filter material, for maximum rejection of both wind noise and vocal P-pops. The retainer makes the pop filter an integral part of the microphone's removable upper grille assembly, allowing easy cleaning for continued top performance. The uniform supercardioid polar pattern of the N/D408A insures superior gain-before-feedback in live applications and better isolation in the studio at all frequencies-compared with other directional microphones with widely varying polar characteristics.
Specifications:
- Frequency Response:
- Close Response: 30 to 22,000 Hz
- Far Response: 60 to 22,000 Hz
- Polar Pattern: Supercardioid
- Open Circuit Voltage: 3.1 mV/pascal@ 1,000 Hz
- Power Sensitivity: -51 dB@ 1,000 Hz (0 dB= 1 mW/pascal)
- Dynamic Range: 144 dB
- Equivalent Output Noise: 14 dB (0 dB = 0.0002 dynes/cm2)
- Impedance: 150 ohms balanced (lo-Z)
- Weight: 6.7 ounces (190 grams)
- Dimensions:
- Height: 4.55 in. (115 mm)
- Width: 2.85 in. (72 mm)
- Length: 2.75 in. (70 mm)
- Close Response: 30 to 22,000 Hz
- Far Response: 60 to 22,000 Hz
- Height: 4.55 in. (115 mm)
- Width: 2.85 in. (72 mm)
- Length: 2.75 in. (70 mm)