{"product_id":"crestron-amp-8150-8-channel-power-amplifier-150w-ch-4-8-ohm-or-70v-north-america-japan-100-120v","title":"Crestron AMP-8150 8-Channel Power Amplifier, 150W\/Ch., 4\/8 Ohm or 70V, North America \u0026 Japan, 100-120V","description":"\u003ch2\u003eCrestron AMP-8150 8-Channel Power Amplifier, 150W\/Ch., 4\/8 Ohm or 70V, North America \u0026amp; Japan, 100-120V\u003c\/h2\u003e\n\u003cp\u003eCrestron® AMP-8000 series amplifiers are designed to complement the Crestron Avia™ family of digital signal processors, and are well-suited for all types of commercial audio applications. Each model furnishes eight channels of clean, efficient amplification in a space-saving 1 RU rack-mountable chassis. Each channel is configurable for Lo-Z or Hi-Z operation, as well as stereo and bridged modes. Network connectivity enables configuration, monitoring, and control via the Crestron Avia Audio Tool software, a Crestron control system, or Crestron Fusion®.\u003csup\u003e[1]\u003c\/sup\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid \u0026amp; Efficient Performance\u003c\/strong\u003e\u003cbr\u003eAMP-8000 series amplifiers are engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply with power factor correction ensures consistent performance with varying line voltages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfigurable \u0026amp; Controllable\u003c\/strong\u003e\u003cbr\u003eThe AMP-8150 model delivers 150 watts per channel into 4 or 8 ohm \"Lo-Z\" loads. Each channel is individually configurable via software for use with \"Hi-Z\" distributed speaker systems (either 70V or 100V depending on model). Adjacent pairs of channels may be configured for stereo or bridged operation. Stereo mode enables remote control of a stereo pair of speakers using a single set of controls. Bridged mode allows two channels to be combined to provide a single channel delivering 300 watts into 8 ohms.\u003c\/p\u003e\n\u003cp\u003eTwo versions of the AMP-8150 are offered. The namesake AMP-8150 model supports 4\/8 ohm and 70V output, and operates on 100-120V AC line power. The \"international\" AMPI-8150 model supports 4\/8 ohm and 100V output, and operates on 220-240V AC line power.\u003c\/p\u003e\n\u003cp\u003eBoth models feature professionally balanced inputs and support input signal levels up to +24 dBu. Rear panel input attenuation controls allow for signal level matching. Remote level control and monitoring is enabled using the Crestron Avia Audio Tool software, or using a touch screen control panel or mobile device through integration with a Crestron control system. Integration with a control system also enables centralized monitoring and control of multiple amplifiers throughout a facility as part of a Crestron Fusionmanaged enterprise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Protected\u003c\/strong\u003e\u003cbr\u003eAMP-8000 series amplifiers feature comprehensive protection against overheating, shorted or overloaded speaker lines, excessive signal levels, and other faults. Each channel is independently protected, allowing an individual channel to enter protection mode without interrupting the operation of other channels. Protection is automatic, quickly disconnecting the speaker line and shutting down the affected channel, and then restoring normal operation once the fault is resolved. Clear indication of any fault is provided on the front panel, and may also be reported to a control system to provide notification on a touch screen or mobile device, through a text message or e-mail, or at a central help desk using Crestron Fusion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-efficiency eight-channel amplifier\u003c\/li\u003e\n\u003cli\u003eRobust and reliable performance\u003c\/li\u003e\n\u003cli\u003eProfessional sound quality\u003c\/li\u003e\n\u003cli\u003e150 watts per channel @ 4\/8 Ohms\u003c\/li\u003e\n\u003cli\u003eEach channel configurable for Lo-Z or Hi-Z operation\u003c\/li\u003e\n\u003cli\u003eModel AMP-8150 supports 100-120V AC line power and 4\/8? or 70V output\u003c\/li\u003e\n\u003cli\u003eModel AMPI-8150 supports 220-240V AC line power and 4\/8? or 100V output\u003c\/li\u003e\n\u003cli\u003eMono, stereo, and bridged modes\u003c\/li\u003e\n\u003cli\u003eComprehensive fault and speaker protection per channel\u003c\/li\u003e\n\u003cli\u003eExtensive front panel status indicators and output meters\u003c\/li\u003e\n\u003cli\u003eHigh-speed Ethernet LAN connectivity\u003c\/li\u003e\n\u003cli\u003eSoftware configuration, control, and monitoring\u003c\/li\u003e\n\u003cli\u003eCrestron® control system integration support\u003c\/li\u003e\n\u003cli\u003eCrestron Fusion® enterprise management support\u003csup\u003e [1]\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear panel +24 dBu balanced inputs and level adjustments\u003c\/li\u003e\n\u003cli\u003eDetachable terminal block connectors for easy servicing\u003c\/li\u003e\n\u003cli\u003eSingle-space 19\" rack mountable\u003c\/li\u003e\n\u003cli\u003eHigh-density stackable without extra vent spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommunications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet:\u003c\/strong\u003e 10\/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full\/half duplex, TCP\/IP, UDP\/IP, CIP, DHCP, SSL, SSH, SFTP (SSH File Transfer Protocol)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Device:\u003c\/strong\u003e USB device port for computer console (setup)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Signal Types:\u003c\/strong\u003e Balanced or unbalanced analog line-level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Signal Types:\u003c\/strong\u003e 4\/8 Ohm; 70 Volt direct-coupled (AMP-8150 only); 100 Volt direct-coupled (AMPI-8150 only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Modes (Configurable via Crestron Avia Audio Tool software):\u003c\/strong\u003e Mono: Each channel is configurable to operate independently from all other channels; Stereo: Adjacent channels (1\u0026amp;2, 3\u0026amp;4, 5\u0026amp;6, 7\u0026amp;8) are configurable to operate as a stereo pair with linked control settings; Bridged: Adjacent channels (1\u0026amp;2, 3\u0026amp;4, 5\u0026amp;6, 7\u0026amp;8) are configurable to operate as an 8 Ohm bridged mono output; 4\/8? Mode: Each channel is configurable for 4\/8 Ohm \"Lo-Z\" output; 70V Mode (AMP-8150 only): Each channel is configurable for 70 Volt \"Hi-Z\" output; 100V Mode (AMPI-8150 only): Each channel is configurable for 100 Volt \"Hi-Z\" output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power, AMP-8150:\u003c\/strong\u003e 150 Watts per channel @ 4-8 Ohms or 70 Volts nominal; 300 Watts per bridged pair of channels @ 8 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power, AMPI-8150:\u003c\/strong\u003e 150 Watts per channel @ 4-8 Ohms or 100 Volts nominal; 300 Watts per bridged pair of channels @ 8 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 Hz to 20 kHz ±0.5 dB at 1 Watt, 4-8 Ohms; 200 Hz to 20 kHz ±0.5 dB at 1 Watt, 70\/100 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Pass Filter:\u003c\/strong\u003e -3 dB @ 80 Hz, 12 dB per octave in 70V or 100V mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e \u0026lt;0.1% @ 1 kHz at 3 dB below clipping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS\/N Ratio:\u003c\/strong\u003e \u0026gt;103 dBA, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e \u0026gt;70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Sensitivity:\u003c\/strong\u003e 1.23 Vrms, +4 dBu (balanced) for full rated output power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFault Protection:\u003c\/strong\u003e Over Current: Protects each channel individually against an excessive speaker load or shorted speaker line; DC Offset: Protects each channel and speaker line against DC voltages sensed at each output; Over Temperature: Protects the amplifier power supply and each channel against overheating due to poor ventilation or excessive temperature; Under Voltage: Protects the amplifier if the internal power supply voltage is below tolerance due to excessive output levels or insufficient line voltage; Note: All faults report to the control system, and indicate on the front panel and in the software tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Relays:\u003c\/strong\u003e Disconnects the speaker line at each output under fault conditions, and during startup and shutdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Ramp:\u003c\/strong\u003e Ramps each channel's audio level up to its last used setting after the corresponding output relay has closed following startup or fault recovery; ramp time ˜2 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLINE INPUTS 1 - 8:\u003c\/strong\u003e (8) 3-pin 3.5 mm detachable terminal blocks; Balanced line-level audio inputs; Maximum Input Level: 12.3 Vrms, +24 dBu; Input Impedance: 20k Ohms balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPEAKER OUTPUTS 1 - 8:\u003c\/strong\u003e (8) 2-pin 7.62 mm reversed gender 20A detachable terminal blocks; Power amplifier outputs; Wire Size: Terminals accept up to 12 AWG (3.31 mm²); Note: Output is direct-coupled in all modes for all load types, not transformer isolated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN:\u003c\/strong\u003e (1) 8-pin RJ45 female; 10Base-T\/100Base-TX Ethernet LAN port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-120V~ 50\/60Hz 3A (AMP-8150):\u003c\/strong\u003e (1) IEC 60320 C14 main power inlet; Mates with removable power cord (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e220-240V~ 50\/60Hz 2A (AMPI-8150):\u003c\/strong\u003e (1) IEC 60320 C14 main power inlet; Mates with removable power cord (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFUSE: T10AH250V (AMP-8150):\u003c\/strong\u003e Main fuse; 1\/4\" x 1-1\/4\", 10A, time-lag, 250V, ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFUSE: T6AH250V (AMPI-8150):\u003c\/strong\u003e Main fuse; 5 x 20 mm, 6.3A, time-lag, 250V, ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG:\u003c\/strong\u003e (1) 6-32 screw; Chassis ground lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMPUTER (front):\u003c\/strong\u003e (1) USB Type B female; USB computer console port (for setup only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls \u0026amp; Indicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWR:\u003c\/strong\u003e (1) Bi-color green\/amber LED, indicates operating power supplied from AC line power, amber indicates startup in progress, green indicates normal operation, alternating green\/amber indicates absence of a network connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRESET:\u003c\/strong\u003e (1) Recessed pushbutton, restores last saved settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTATUS, FAULT 1 - 8:\u003c\/strong\u003e (8) Red LEDs, each indicates an under-voltage fault condition on the corresponding channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTATUS, CURRENT 1 - 8:\u003c\/strong\u003e (8) Blue LEDs, each indicates an over-current fault condition on the corresponding output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTATUS, DC 1 - 8:\u003c\/strong\u003e (8) Blue LEDs, each indicates a DC offset fault condition on the corresponding channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTATUS, THERM 1 - 8:\u003c\/strong\u003e (8) Blue LEDs, each indicates an over-temperature fault condition on the corresponding channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTATUS, 70V 1 - 8 (AMP-8150 only):\u003c\/strong\u003e (8) Blue LEDs, each indicates the corresponding channel is configured for 70 Volt operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTATUS, 100V 1 - 8 (AMPI-8150 only):\u003c\/strong\u003e (8) Blue LEDs, each indicates the corresponding channel is configured for 100 Volt operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVU 1 - 8:\u003c\/strong\u003e (8) 5-segment LED bar graph audio level meters for each corresponding output; each contains (4) blue LEDs for -40dB, -30dB, -20dB, and -10dB, and (1) red LED for CLIP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLINE INPUTS 1 - 8 (rear):\u003c\/strong\u003e (8) Screwdriver-adjustable rotary controls, each adjusts the input attenuation level for the corresponding channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN (rear):\u003c\/strong\u003e (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSETUP (rear):\u003c\/strong\u003e (1) Red LED and (1) pushbutton for Ethernet setup, flashes while updating firmware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Switch (rear):\u003c\/strong\u003e (1) Rocker switch, turns main power on or off\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Power (AMP-8150):\u003c\/strong\u003e 3 Amps @ 100-120 Volts AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Power (AMPI-8150):\u003c\/strong\u003e 2 Amps @ 220-240 Volts AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 253 Watts, all channels driven at 1\/8th output power; 70 Watts, all channels idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 41° to 104°F (5° to 40°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity:\u003c\/strong\u003e 10% to 90% RH (non-condensing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Dissipation:\u003c\/strong\u003e 375 BTU\/hr, all channels driven at 1\/8th output power; 250 BTU\/hr, all channels idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e Metal, variable-speed fan-cooled, vented sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Panel:\u003c\/strong\u003e Metal, black finish with polycarbonate label overlay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Freestanding or 1 RU 19-inch rack-mountable (front rack ears and rear support brackets included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1.72 in (44 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 17.28 in (439 mm); 19.00 in (483 mm) with rack ears\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 14.69 in (374 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12.6 lb (5.72 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eUL® Listed for the United States and Canada, under UL\/IEC 60065. CE compliant for applicable European market requirements.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Crestron","offers":[{"title":"New","offer_id":68204415090882,"sku":"AMP-8150","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/files\/AMP-8150-1.png?v=1793218287","url":"https:\/\/shop.solotech.com\/products\/crestron-amp-8150-8-channel-power-amplifier-150w-ch-4-8-ohm-or-70v-north-america-japan-100-120v","provider":"Solotech","version":"1.0","type":"link"}