Coda Line Array System with 32 AiRay/16 ViRay/32 Subs/22 Amps

Coda Line Array System with 32 AiRay/16 ViRay/32 Subs/22 Amps

System includes:
32 x AiRay Line Array Loudspeakers
12 x SC2F Line Array Subwoofers (Flown)
16 x ViRay Line Array Loudspeakers
12 x SCPF Line Array Subwoofers
8 x APS Loudspeakers
22 x Linus14D 4-channel Amplified Controllers
Rigging and Transportation Cases/Dolly for Above

Speak with a Sales Representative for more information.

Coda Audio AiRAY Full Range Line Array System

The AiRAY is a fully integrated compact 2x 12” / 3-way line array system, designed for wide varieties of applications where high output, even coverage and outstanding intelligibility is required. The AiRAY unique package brings together the high output of a large system with the flexibility of a compact system creating a new category in large reinforcement systems.

Specifications:

• Type: 3-way bi-amplified line array module
• Frequency response: 50 Hz – 22 kHz (-6 dB)
• Power handling AES / peak (passive): Bi-amplified only
• Low AES / peak: 2000 W / 8000 W
• Mid / High AES / peak: 300 W / 2600 W
• Sensitivity low 1W / 1m: 103 dB
• Sensitivity mid / high 1W / 1m: 114 dB
• Maximum peak SPL (with LINUS10)
• Low: 143 dB
• Mid / High: 148 dB
• Amplification, Cabinets per Amplifier:
• LINUS14D Optimum / Maximum: 4/6
• LINUS10 Optimum / Maximum: 2/3
• Dispersion horizontal: 90°, 120° or asymmetrical 105°
• Dispersion vertical: Array dependent: 0°, 0.5°, 1°, 2°, 2.5°, 3° to 8° in 1°-steps
• Components:
• Low frequency: 2x 12″ neodymium, water resistant cones, 4″ (101.6 mm) voice coil, 1000 W (AES) each
• Mid/High frequency:
  • 2x 6″ DDP (Double Diaphragm Planar-wave-drivers)
  • Mid: 3.5″ (90 mm) voice coil, 150 W (AES) each
  • High: 1.75″ (44.4 mm) voice coil, 80 W (AES) each
• Crossover point: 400 Hz bi-amp, 6300 Hz passive
• Input connectors: 2x Neutrik™: 1x Input + 1x Link Cable
• Nominal impedance LF / MF+HF: 8 Ohm (1+/1-) / 16 Ohm (2+/2-)
• Enclosure material: Birch plywood
• Finish: Polyurea coating (water resistant)
• Flying hardware: Integrated
• Dimensions (WxHxD): 674 x 356 x 555 mm / 26.54 x 14.02 x 21.85″ (674 x 400 x 555 mm / 26.54 x 15.75 x 21.85″ incl. hardware)
• Net weight: 40 kg / 88.18 lbs

Coda Audio ViRAY Series 3-Way Line Array System

The ViRAY is a compact 3-way symmetrical line array module, designed for small to medium venues where high fidelity sound and outstanding intelligibility is required.

Features:

• Unique 8” coaxial mid/high planar wave driver
• Dual 8″ neodymium ultra low distortion cone drivers
• ViCOUPLER unites all transducersto perfom as a single source
• High power handling of 600 W
• Variable horizontal coverage of 120° or 80° or 100° asymmetrical (40°+60°)
• Vertical curving 0° to 10° variable in 1° steps
• Superior sound
• Integrated rigging system for flown or ground stacked arrays
• Multiplex enclosure with Polyurea coating for extreme durability and water protection
• Subwoofer extension with the SCV-F
• System integration with LINUS RACKs

Specifications:

• Type: Compact 3-way Bi-amplified line array module
• Application:Minimal 1, maximal 24 units line array
• Frequency response: 55 Hz – 22 kHz (-6 dB)
• Power handling AES / peak (passive): 600 W/ 2400 W
• Low AES / peak: 600 W/ 2400 W
• Mid AES / peak: 150 W/ 1300 W
• High AES / peak: 80 W/ 400 W
• Sensitivity low 1 W / 1 m: 99 dB
• Sensitivity mid/high 1 W/1 m: 112 dB
• Max. SPL peak low: 133 dB
• Max. SPL peak mid/high: 142 dB
• Amplification, Cabinets per Amplifier:
• LINUS14D Optimum / Maximum: 8/12 (bi-amp) or 16/24 (passive)
• LINUS10 Optimum / Maximum: 4/6 (bi-amp) or 8/12 (passive)
• Dispersion horizontal: 120°, 80° or 100° (60° + 40° or 40° + 60°)
• Dispersion vertical: Array dependent, 0°-10° in 1°-steps
• Components:
• Low frequency: 2x 8″ neodymium, water resistant cones 2″ (50.8 mm) voice coil, 300 W (AES) each
• Mid/High frequency:
  • 8″ coaxial neodymium Planar-wave-driver
  • Mid: 3.5″ (90 mm) voice coil, 150 W (AES)
  • Hi: 1.75″ (44.4 mm) voice coil, 80 W (AES)
• Crossover point: 600 Hz passive or bi-amp (internal connector), 6300 Hz passive
• Input connectors: 2x Neutrik™: 1x Input + 1x Link Cable
• Nominal impedance LF / MF+ HF: 16 Ohm (1+/1-) / 16 Ohm (+2/-2)
• 3-way passive: 16 Ohm (2+/2-)
• Enclosure shape: Horizontal trapezoid 2x 5°
• Enclosure material: Birch plywood
• Finish: Polyurea coating (water resistant)
• Flying hardware: Integrated
• Dimensions (WxHxD): 674 x 242 x 385 mm / 26.54 x 9.53 x 15.16″
• Net weight: 25.5 kg / 56.22 lbs
• System Performance:
  • Array(1xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (12°), Peak Output (+6 dB) (133 dB)
  • Array(2xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (0 – 10° adjustable), Peak Output (+6 dB) (139 dB)
  • Array(4xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (0 – 40° adjustable), Peak Output (+6 dB) (145 dB)
  • Array(8xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (0 – 80° adjustable), Peak Output (+6 dB) (151 dB)

CODA AUDIO SCPF Line Array Subwoofer

The SCP-F is perfectly suited as a subwoofer for G700-Series and CUE-Series, extending the system performance down to 25 Hz. SCP-F is also an addition to AiRAY High Output line array systems. Typical applications are touring sound, theaters, houses of worship, dance clubs and live sound venues.

Features:

• 2 x 18” extreme high excursion neodymium woofers
• Extended frequency range: 25 Hz – 120 Hz (-6 dB)
• High power handling: 3000 W (AES)
• Sensor Control Technology
• Ultra low distortion
• Fast transient response. The upper and the ultra low frequency are time aligned
• Rigging hardware for flown or ground-stacked arrays
• Cardio or omnidirectional configurations
• System integration with LINUS Loudspeaker Management Amplifiers

Specifications:

• Type: High Output Dual 18″ Subwoofer with SC Technology
• Application: High output subwoofer
• Frequency response: 25 Hz – 120 Hz (-6 dB)
• Power handling AES / peak: 3000 W / 12000 W
• Sensitivity 1 W / 1 m: 103 dB
• Maximum output peak: 144 dB
• LINUS14 Optimum / Maximum: 4/4
• Components: 2 x 18″ neodymium ultra low distortion woofers 4″ (101.6 mm) voice coil, 1500 W (AES) each
• Nominal impedance: 4 Ω (1+/1-)
• Input connectors:
  • 2 x Neutrik™ NL4MP (rear)
  • +1 x Neutrik™ NL4MP (front)
• Velocity sensors output:
  • 1 x Neutrik™ NC3MAV (rear)
  • 1 x Neutrik™ NC3MAV (front)
• Suspension: Flying hardware integrated
• Enclosure material: Birch plywood
• Finish: Black polyurea coating
• IP rating (IEC 60529) IP54
• Weather protection options:
  • Standard IP55: IP55 (Amphenol connectors)
  • MG1 (Marine Grade 1): IP55
• Dimensions: (WxHxD) 1108 x 550 x 800 mm / 43.85 x 21.65 x 31.5″
• Net weight: 95 kg / 209.44 lbs

Coda Audio APS 3-way Arrayable Point Source

The APS is a compact 2x 10” / 3-way arrayable point source that combines the user-friendliness of a point source with the perfect arrayability of a line array creating a unique category reinforcement system for medium size venues.

Features:

• 3-way Arrayable Point Source
• Unique 9” Dual Diaphragm Curved-wave-driver (DDC)
• Dual 10″ neodymium ultra low distortion cone drivers
• APS-COUPLER sums the energy from all transducers to perform as a single source
• Integrated rigging system for horizontal or vertical arrays as well as Single use
• Variable horizontal coverage: 120°, 90°, 60° or asymmetrical: 105° (45°+60°); 90° (30°+60°); 75° (30°+45°)
• Variable vertical coverage of 20° (one cabinet), 40° (two cabinets), 60° (3 cabinets) etc. up to 360° (18 Cabinets)
• Linear phase response for superior fidelity
• Frequency range: 50 Hz – 22 kHz
• Exceptionally high sound pressure
• Multiplex enclosure with Polyurea coating for extreme durability and water protection
• Subwoofer extension down to 28 Hz with APS-SUB
• System integration with LINUS amplifiers

Specifications:

• Type:3-way Arrayable Point Source
• Frequency response:50 Hz – 22 kHz (-6 dB)
• Power handling:
• Low AES peak: 1200 W / 4800 W
• Mid / High AES / peak: 150 W / 1300 W
• Sensitivity:
• Low 1 W / 1 m: 100 dB
• Mid / High 1 W / 1 m: 111 dB
• Maximum peak SPL (with LINUS14)
• Low: 137 dB
• Mid / High: 146 dB
• Amplification, Cabinets per Amplifier:
• LINUS10-C Optimum / Maximum: 8/12
• LINUS14D Optimum / Maximum: 8/12
• LINUS10 Optimum / Maximum: 4/8
• Dispersion horizontal: 120°, 90°, 60° or 105° (45°+60°); 90° (30°+60°); 75° (30°+45°)
• Dispersion vertical: 20°
• Components:
• Low frequency: 2x 10″ neodymium, water resistant cones 3″ (77 mm) voice coil, 600 W (AES) each
• Mid / High frequency: 9″ coaxial neodymium 20° Curved-wave-driver
• Mid: 3.5″ (90 mm) voice coil, 150 W (AES)
• High: 1.75″ (44.4 mm) voice coil, 80 W (AES)
• Crossover point: 500 Hz, 6300 Hz passive
• Input connectors: 2x Neutrik™ NL4MP
• Nominal impedance: 8 Ω (+2/-2)
• Enclosure material: Birch plywood
• Finish: Polyurea coating (water resistant)
• Flying hardware: Integrated
• Dimensions (WxHxD): 674 x 291 x 492 mm / 26.54 x 11.46 x 19.37″
• Net weight: 27 kg / 59.52 lbs

Coda Audio LINUS14D 4X Channel Audio Amplifier 3500-Watt

The LINUS14D is a four channel DSP, network, comparator and amplifier delivering 4x 3500 W of clean power in a light weight 19”/2U package. The 4 audio inputs are selectable from analog, LiNET digital audio or DANTE audio network and are routable to any of the 4 outputs via the input matrix.

Features:

• Very high output power (4x 3500W @ 4 Ohm)
• SHARC floating point DSP @ 96 kHz
• DANTE and LiNET – 8x freely configurable digital audio signals over CAT5 cables
• 4 dynamic comparators for use with CODA Audio sensor controlled subwoofers
• LINUS Control Ethernet interface provides network control and monitoring of amplifiers
• Advanced IIR and linear-phase FIR filters
• Efficient Class D-IC design for superior sound performance
• Switch-mode power supply for 115 V / 230 V with automatic voltage selection

Specifications:

• Number of output channels: 4
• Output: stage Class D
• Internal samplerate / bit-depth: 96 kHz / 24 bit
• Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - analogue input):
  • >108 dB (unweighted)
  • >111 dB (A-weighted)
• Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - digital input):
  • > 116 dB (unweighted)
  • > 119 dB (A-weighted)
• Frequency response (8 Ω load, with CLEAR preset): 20 Hz–20 kHz = (+0.0 dB / -1.0 dB)
• THD+N & IMD (4 Ω load @ 1/2 output power): 20 Hz–20 kHz = < 0.005%
• Latency (input to loudspeaker output):
  • min. 2.70 ms AES/EBU input
  • min. 2.00 ms Analogue input
• Protection circuits: Inrush current limiter, Thermal limiter, Output DC, SMPS over-current, Output overload
• LED indicators: Mute status, Limit, Signal, Protection, Ethernet control active, Digital signal locked, DanteTM Power on
• Ethernet connection:
  • 2x 100 Mbps RJ45 Control
  • 1x 100 Mbps RJ45 DanteTM
• Dimensions (W x H x D): 483.5x88x454mm / 19x3.4x17.8”
• Shipping dimensions (W x H x D): 675x130x560 mm / 26.5x5.1x22”
• Net weight: 14.75 kg / 32.5 lbs.
• Shipping weight: 17.5 kg / 38.6 lbs.