Audio-Technica ATM35 Cardioid Condenser Microphone
The ATM35 clips to brass, reeds, piano, acoustic bass, snare, and toms. It delivers a crisp, clear, well-balanced response, even at high SPLs.
Features:
- Clips to brass, reeds, piano, acoustic bass, snare, and toms
- Crisp, clear, well-balanced response, even at high SPLs
- Interchangeable elements available for hypercardioid and subcardioid polar patterns
- UniMount® clip permits accurate positioning while protecting element
- Operates on battery or phantom power
- Also available as: ATM35cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 150 Hz, 12 dB/octave
- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 118 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 67 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Battery Type: 9V
- Battery Current/Life: 1 mA / 1000 hours typical
- Switches:
- On-flat, on-roll-off (phantom)
- Off, on-flat, on-roll-off (battery)
- Weight (Microphone): 0.3 oz (8.5 g)
- Weight (Power Module): 5.4 oz (153 g)
- Cable: 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module
- Dimensions (Power Module): 3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D
- Dimensions (Microphone): 1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter
- Output Connector (Power Module): Integral 3-pin XLRM-type
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 150 Hz, 12 dB/octave
- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 118 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 67 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Battery Type: 9V
- Battery Current/Life: 1 mA / 1000 hours typical
- Switches:
- On-flat, on-roll-off (phantom)
- Off, on-flat, on-roll-off (battery)
- Weight (Microphone): 0.3 oz (8.5 g)
- Weight (Power Module): 5.4 oz (153 g)
- Cable: 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module
- Dimensions (Power Module): 3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D
- Dimensions (Microphone): 1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter
- Output Connector (Power Module): Integral 3-pin XLRM-type
