Audio Technica AT4073A Shotgun Microphone
The AT4073a sets new standards in small size and light weight. With an overall length of just 9.13” and weight of just 4.0 oz., the mic adds virtually no heft to the end of a fish pole or the top of a minicam. Through the use of an advanced proprietary Audio-Technica design, the interference tube of the AT4073a provides a narrow acceptance angle that would require a tube 50 percent longer using conventional technology.
Features:
- Designed for critical long-distance pickup in broadcasting, film/TV production and theater sound reinforcement applications
- Direct-coupled, balanced output ensures a clean signal even in high-output conditions
- Exclusive acoustic design provides same directivity as mics up to 50% longer
- Switchable 150 Hz hi-pass filter
- Rugged housing made of lightweight structural-grade aluminum alloy
Specifications:
- Element: Externally polarized (DC bias) condenser
- Polar Pattern: Line + gradient
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 150 Hz, 12 dB/octave
- Open Circuit Sensitivity: -23 dB (70.8 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 126 dB SPL, 1 kHz at 1% T.H.D.
- Noise: 14 dB SPL
- Dynamic Range: 112 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 80 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.2 mA typical
- Switches: Flat, roll-off
- Weight: 4.0 oz. (114 g)
- Dimensions: 9.13" (232.0 mm) long, 0.83" (21.0 mm) diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; protective carrying case
- Audio-Technica Case Style: SG2
- Element: Externally polarized (DC bias) condenser
- Polar Pattern: Line + gradient
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 150 Hz, 12 dB/octave
- Open Circuit Sensitivity: -23 dB (70.8 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 126 dB SPL, 1 kHz at 1% T.H.D.
- Noise: 14 dB SPL
- Dynamic Range: 112 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 80 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.2 mA typical
- Switches: Flat, roll-off
- Weight: 4.0 oz. (114 g)
- Dimensions: 9.13" (232.0 mm) long, 0.83" (21.0 mm) diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; protective carrying case
- Audio-Technica Case Style: SG2
