{"product_id":"radial-stagebug-sb-6-isolator","title":"Radial StageBug SB-6 Isolator","description":"\u003ch2\u003eRadial StageBug SB-6 Stereo Isolator\u003c\/h2\u003e\n\u003cp\u003ePassive Stereo Line Isolator\u003c\/p\u003e\n\u003cp\u003eThe StageBug SB-6 is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProblem solver for stereo systems \u003c\/strong\u003e\u003cbr\u003eThe SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStageBug SB-6 Applications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the SB-6 in a stereo setup \u003c\/strong\u003e \u003cbr\u003eIsolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼\" mono or TRS connectors may be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the SB-6 in a pro setup\u003c\/strong\u003e \u003cbr\u003eWhen running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the SB-6 in a guitar rig\u003c\/strong\u003e \u003cbr\u003eEliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIsolator for balanced and unbalanced signals\u003c\/li\u003e\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eExceptionally linear from 20Hz to 20kHz\u003c\/li\u003e\n\u003cli\u003eAutomatically configures for hi-Z or lo-Z signal chains\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeft Phase \u003c\/strong\u003e\u003cbr\u003ereverses the polarity on the left output to help phase-align stereo signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad\u003c\/strong\u003e\u003cbr\u003ereduces the input sensitivity by 15dB for louder sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003e1\/4\" balanced TRS or unbalanced input. The StageBug SB-6 will auto-configure depending on the jack that is used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003cbr\u003e1\/4\" balanced TRS or unbalanced output. The StageBug SB-6 will auto-configure depending on the jack that is used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Lift Left\u003c\/strong\u003e\u003cbr\u003elifts the ground on the left output to reduce hum and buzz caused by ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Lift Right\u003c\/strong\u003e\u003cbr\u003elifts the ground on the right output to reduce hum and buzz caused by ground loops.\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: Passive Transformers\u003c\/li\u003e\n\u003cli\u003eTransformer: Eclipse Custom\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz-20KHz +\/-1db\u003c\/li\u003e\n\u003cli\u003eDynamic range:\u0026gt;140db\u003c\/li\u003e\n\u003cli\u003eGain: -2dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion:\u0026lt;0.0008% @ 1kHz\u003c\/li\u003e\n\u003cli\u003ePhase Deviation: \u0026gt;5° @ 30Hz\u003c\/li\u003e\n\u003cli\u003eInput Impedance: Varies with Load\/47K\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 600?\u003c\/li\u003e\n\u003cli\u003eMaximum Input:\u0026gt;+25dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eInput pad, 180° polarity reverse, Ground lift\u003c\/li\u003e\n\u003cli\u003eInput Connectors:1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutput Connectors:1\/4\" TRS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eGeneral \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: 14 gauge steel chassis \u0026amp; outer shell\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): 3.92\" x 2.54\" x 1.7\" (100mm x 65mm x 43mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.9 lbs (408 grams)\u003c\/li\u003e\n\u003cli\u003eShipping size (L x W x D):8\" x 5\" x 3\" (203mm x 127mm x 76mm)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 1.0 lbs (453 grams)\u003c\/li\u003e\n\u003cli\u003ePower:Passive, no power required\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5°C and 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"New","offer_id":31594442162224,"sku":"SB-6-ISOLATOR","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/SB-6-ISOLATOR.jpg?v=1582416473","url":"https:\/\/shop.solotech.com\/en-uk\/products\/radial-stagebug-sb-6-isolator","provider":"Solotech","version":"1.0","type":"link"}