{"title":"d\u0026b audiotechnik","description":"\u003cp\u003e The idea is that loudspeakers and electronics should be built systematically, that is, to work in total unity. As a result, d\u0026amp;b loudspeakers can only be driven by d\u0026amp;b amplifiers; it’s an exclusive, but technically beneficial union, maximizing efficiency, consistency and ease of use. A fully integrated way of working that sets d\u0026amp;b out from the crowd.\n\n\u003c\/p\u003e","products":[{"product_id":"d-b-audiotechnik-y8-high-performance-2-way-passive-line-array-loudspeaker","title":"d\u0026b audiotechnik Y8 High-Performance 2-Way Passive Line Array Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik Y8 High-Performance 2-Way Passive Line Array Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 80° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Y8 loudspeakers or combined with Y12 and\/or Y-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 54 Hz - 19 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 19 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure\n\u003cul\u003e\n\u003cli\u003ewith 10D: 134 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/30D: 137 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 139 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data\n\u003cul\u003e\n\u003cli\u003eConfiguration: High performance 2-way passive line array loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 400\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (horizontal): 80°\u003c\/li\u003e\n\u003cli\u003eSplay angle settings: 0° - 14° (1° increment)\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e2 x 8\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4\" exit compression driver\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NLT4 F\/M\u003c\/li\u003e\n\u003cli\u003eoptional 2 x NL4 or 2 x EP5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\n\u003cul\u003e\n\u003cli\u003e257 x 630 x 375 mm\u003c\/li\u003e\n\u003cli\u003e10 x 24.8 x 14.8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003e20 kg\u003c\/li\u003e\n\u003cli\u003e44 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"D\u0026B Audiotechnik","offers":[{"title":"Touring Gear - Used","offer_id":42607566028994,"sku":"TZ-Y8","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/TZ-Y8.jpg?v=1669058472"},{"product_id":"d-b-audiotechnik-ds10-audio-network-bridge","title":"d\u0026b audiotechnik DS10 Audio Network Bridge","description":"\u003ch2\u003ed\u0026amp;b audiotechnik DS10 Audio Network Bridge\u003c\/h2\u003e\n\u003cp\u003eThe DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. Positioned within the signal chain in front of the amplifiers, this 1 RU device expands the d\u0026amp;b system approach in both mobile and installation environments. Each unit can deliver up to sixteen Dante network channels via AES3 digital signal outputs. The AES3 channel streams from the DS10 carry meta data with Dante channel labels and cabling information to the four channel d\u0026amp;b amplifiers. Additionally, four AES3 input channels provide access to the Dante audio network for applications such as a break-in from a Front of House console.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 AES3 digital output channels\u003c\/li\u003e\n\u003cli\u003e4 AES3 digital input channels\u003c\/li\u003e\n\u003cli\u003eIntegrated 5-port network switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControls and indicators:\n\u003cul\u003e\n\u003cli\u003eBYPASS\/NETWORK: Toggle switch\u003c\/li\u003e\n\u003cli\u003eSUBSCRIBED (RX Subscription): Green LED indicator\u003c\/li\u003e\n\u003cli\u003eSYNC ERROR: Red LED indicator\u003c\/li\u003e\n\u003cli\u003eSwitch port modes\/Audio loss: LED indicators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital inputs:\n\u003cul\u003e\n\u003cli\u003eDIGITAL IN: 3 pin XLR female AES3\u003c\/li\u003e\n\u003cli\u003eSampling: 32 - 192 kHz\u003c\/li\u003e\n\u003cli\u003eSynchronization: Sample Rate Converter (SRC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital outputs:\n\u003cul\u003e\n\u003cli\u003eDIGITAL OUT: 3 pin XLR male AES3\u003c\/li\u003e\n\u003cli\u003eSampling: 48 \/ 96 kHz\u003c\/li\u003e\n\u003cli\u003eSynchronization: Dante network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eNetwork:\u003c\/li\u003e\n\u003cli\u003eConnectors:\u003c\/li\u003e\n\u003cli\u003eetherCON®\u003c\/li\u003e\n\u003cli\u003ebuilt-in 5-port Ethernet switch\u003c\/li\u003e\n\u003cli\u003e100\/1000 Mbit\u003c\/li\u003e\n\u003cli\u003eOperating conditions:\n\u003cul\u003e\n\u003cli\u003eHumidity (rel.), long term average: 70%\u003c\/li\u003e\n\u003cli\u003eStorage temperature: –20 °C ... 70 °C \/ –4 °F ... 158 °F\u003c\/li\u003e\n\u003cli\u003eTemperature range: 0 °C ... 40 °C \/ 32 °F ... 104 °F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply:\n\u003cul\u003e\n\u003cli\u003eMains connector: powerCON®\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection: Up to 400 VAC\u003c\/li\u003e\n\u003cli\u003eRated mains voltage: 100 - 240 V, 50 - 60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 1 RU x 19“ x 232 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.75 kg \/ 8.26 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"D\u0026B Audiotechnik","offers":[{"title":"Touring Gear - Used","offer_id":42771186286786,"sku":"TZ-DS10","price":655.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/TZ-DS10.jpg?v=1670421657"},{"product_id":"d-b-audiotechnik-e6532-000-00-super-clamp","title":"d\u0026b audiotechnik E6532.000.00 Super Clamp","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E6532.000.00 Super Clamp\u003c\/h2\u003e\n\u003cp\u003eAOR d\u0026amp;b audiotechnik super clamp.\u003c\/p\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872525324482,"sku":"E6532-000-00","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/E6532-000-00.jpg?v=1679410128"},{"product_id":"d-b-audiotechnik-e6533-000-00-adapter-m10-for-super-clamp","title":"d\u0026b audiotechnik E6533.000.00 M10 Adapter for Super Clamp","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E6533.000.00 M10 Adapter for Super Clamp\u003c\/h2\u003e\n\u003cp\u003exS-Series\/E-Series M10 adapter for Super Clamp.\u003c\/p\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872525750466,"sku":"E6533-000-00","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/E6533_3.jpg?v=1679465839"},{"product_id":"d-b-audiotechnik-z0210-001-e12x-12-inch-nl4-passive-subwoofer","title":"d\u0026b audiotechnik E12X 12-Inch NL4 Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12X 12-Inch NL4 Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe E12X-SUB is a compact, lightweight, high performance subwoofer for use with d\u0026amp;b E-Series loudspeakers. The built in passive crossover network allows the E12X-SUB to be operated in parallel to the E8 loudspeaker on the same amplifier channel, greatly extending the low frequency headroom and bandwidth of the systems. Alternatively it can be operated actively driven by its own amplifier channel without the need for any changes to the subwoofer. In Active mode the E12X-SUB can be used to supplement any of the E-Series cabinets. The E12X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a handle and an M20 threaded flange on the top to accept the d\u0026amp;b Loudspeaker stand winder M20. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eAmplifiers\u003c\/h3\u003e\n\u003cp\u003eWhen the E8-X configuration is selected an E12X-SUB can be driven passively in parallel with an E8 from the same amplifier channel.\u003c\/p\u003e\n\u003cp\u003eThe following amplifiers can be used to drive the E12X-SUB:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMobile: D20, D40, D80\u003c\/li\u003e\n\u003cli\u003eInstallation: 5D, 10D, 30D, 40D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12\"\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPLmax 127 dB\u003c\/li\u003e\n\u003cli\u003eWeight 18 kg \/ 40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch3\u003eSystem data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 45 Hz - 100 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB 140 Hz mode): 45 Hz - 140 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure [1]:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ewith 10D: 124 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 127 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLoudspeaker data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration: Compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eComponents: 12\" driver\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NL4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensions \/ weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 358 x 530 x 448 mm \/ 14.1 x 20.9 x 17.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 18 kg \/ 40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[1] 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven. For possible performance deviations when using multiple loudspeakers, check 5D Powershare Calculator tool.\u003c\/p\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872526307522,"sku":"Z0210-001","price":2670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/files\/Z0210-001.jpg?v=1684132933"},{"product_id":"d-b-audiotechnik-z0210-002-e12x-12-inch-nlt4f-m-passive-subwoofer","title":"d\u0026b audiotechnik E12X 12-Inch NLT4F\/M Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12X 12-Inch NLT4F\/M Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe E12X-SUB is a compact, lightweight, high performance subwoofer for use with d\u0026amp;b E-Series loudspeakers. The built in passive crossover network allows the E12X-SUB to be operated in parallel to the E8 loudspeaker on the same amplifier channel, greatly extending the low frequency headroom and bandwidth of the systems. Alternatively it can be operated actively driven by its own amplifier channel without the need for any changes to the subwoofer. In Active mode the E12X-SUB can be used to supplement any of the E-Series cabinets. The E12X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a handle and an M20 threaded flange on the top to accept the d\u0026amp;b Loudspeaker stand winder M20. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eAmplifiers\u003c\/h3\u003e\n\u003cp\u003eWhen the E8-X configuration is selected an E12X-SUB can be driven passively in parallel with an E8 from the same amplifier channel.\u003c\/p\u003e\n\u003cp\u003eThe following amplifiers can be used to drive the E12X-SUB:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMobile: D20, D40, D80\u003c\/li\u003e\n\u003cli\u003eInstallation: 5D, 10D, 30D, 40D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12\"\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPLmax 127 dB\u003c\/li\u003e\n\u003cli\u003eWeight 18 kg \/ 40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch3\u003eSystem data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 45 Hz - 100 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB 140 Hz mode): 45 Hz - 140 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure [1]:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ewith 10D: 124 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 127 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLoudspeaker data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration: Compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eComponents: 12\" driver\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensions \/ weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 358 x 530 x 448 mm \/ 14.1 x 20.9 x 17.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 18 kg \/ 40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[1] 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven. For possible performance deviations when using multiple loudspeakers, check 5D Powershare Calculator tool.\u003c\/p\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872528076994,"sku":"Z0210-002","price":2670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/files\/Z0210-002.jpg?v=1684133226"},{"product_id":"d-b-audiotechnik-z0210-100-e12x-12-inch-passive-subwoofer-weather-resistant","title":"d\u0026b audiotechnik E12X 12-Inch Passive Subwoofer - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12X 12-Inch Passive Subwoofer - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe E12X-SUB is a compact, lightweight, high performance subwoofer for use with d\u0026amp;b E-Series loudspeakers. The built in passive crossover network allows the E12X-SUB to be operated in parallel to the E8 loudspeaker on the same amplifier channel, greatly extending the low frequency headroom and bandwidth of the systems. Alternatively it can be operated actively driven by its own amplifier channel without the need for any changes to the subwoofer. In Active mode the E12X-SUB can be used to supplement any of the E-Series cabinets. The E12X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a handle and an M20 threaded flange on the top to accept the d\u0026amp;b Loudspeaker stand winder M20. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12″\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPL max 127 dB\u003c\/li\u003e\n\u003cli\u003eWeight 18 kg \/ 40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 45 Hz - 100 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB 140 Hz mode): 45 Hz - 140 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 124 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 127 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eComponents: 12\" driver\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\n\u003cul\u003e\n\u003cli\u003e358 x 530 x 448 mm\u003c\/li\u003e\n\u003cli\u003e14.1 x 20.9 x 17.6\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003e18 kg\u003c\/li\u003e\n\u003cli\u003e40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872529092802,"sku":"Z0210-100","price":3040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0210-100.jpg?v=1679468566"},{"product_id":"d-b-audiotechnik-z0350-001-e6-6-5-inch-nl4-passive-loudspeaker","title":"d\u0026b audiotechnik E6 6.5-Inch NL4 Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E6 6.5-Inch NL4 Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E6 is a relatively small high performance multipurpose loudspeaker, employing an integrated coaxial driver. The horn with its 100° x 55° dispersion pattern can easily be rotated through 90° providing a 55° x 100° pattern without the use of tools. This enables deployment of the loudspeaker either vertically or horizontally. Its distinctive cabinet design and extensive range of accessories allow easy deployment in almost any situation, including stage monitoring. It provides a very compact reinforcement solution that inspires through its sound quality and is also perfectly compatible with the larger E8 and E12 loudspeakers. With the addition of an E12X subwoofer or any other E-Series subwoofer it can also reproduce high level music program. The E6 cabinet has an impact resistant paint finish incorporating a handle. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 6.5″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion 100° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 123 dB\u003c\/li\u003e\n\u003cli\u003eWeight 5 kg \/ 11 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 85 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 120 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) E6 with D12: 123 dB\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) E6 with D6 or E-PAC: 120 dB (SPLmax peak, pink noise test signal with crest factor of 4)\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –11 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 20 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS \/ peak 10 ms): .150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): .100° x 55°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e6.5“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003ecoaxial 1” exit compression driver with 1.75“ coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePin assignments:\n\u003cul\u003e\n\u003cli\u003eNL4: 1+\/1–\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 5.0 kg (11 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872529682626,"sku":"Z0350-001","price":2260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0350-001.jpg?v=1679468837"},{"product_id":"d-b-audiotechnik-z0350-002-e6-6-5-inch-nlt4f-m-passive-loudspeaker","title":"d\u0026b audiotechnik E6 6.5-Inch NLT4F\/M Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E6 6.5-Inch NLT4F\/M Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eFOR USED ONLY - This item will only be sold in pairs.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe E6 is a relatively small high performance multipurpose loudspeaker, employing an integrated coaxial driver. The horn with its 100° x 55° dispersion pattern can easily be rotated through 90° providing a 55° x 100° pattern without the use of tools. This enables deployment of the loudspeaker either vertically or horizontally. Its distinctive cabinet design and extensive range of accessories allow easy deployment in almost any situation, including stage monitoring. It provides a very compact reinforcement solution that inspires through its sound quality and is also perfectly compatible with the larger E8 and E12 loudspeakers. With the addition of an E12X subwoofer or any other E-Series subwoofer it can also reproduce high level music program. The E6 cabinet has an impact resistant paint finish incorporating a handle. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 6.5″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion 100° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 123 dB\u003c\/li\u003e\n\u003cli\u003eWeight 5 kg \/ 11 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 85 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 120 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) E6 with D12: 123 dB\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) E6 with D6 or E-PAC: 120 dB (SPLmax peak, pink noise test signal with crest factor of 4)\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –11 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 20 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS \/ peak 10 ms): .150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): .100° x 55°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e6.5“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003ecoaxial 1” exit compression driver with 1.75“ coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 5.0 kg (11 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872531058882,"sku":"Z0350-002","price":2260.0,"currency_code":"USD","in_stock":true},{"title":"Touring Gear - Used","offer_id":45213358457026,"sku":"TZ-E6NL4T","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0350-002.jpg?v=1679469284"},{"product_id":"d-b-audiotechnik-z0350-100-e6-6-5-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik E6 6.5-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E6 6.5-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe E6 is a relatively small high performance multipurpose loudspeaker, employing an integrated coaxial driver. The horn with its 100° x 55° dispersion pattern can easily be rotated through 90° providing a 55° x 100° pattern without the use of tools. This enables deployment of the loudspeaker either vertically or horizontally. Its distinctive cabinet design and extensive range of accessories allow easy deployment in almost any situation, including stage monitoring. It provides a very compact reinforcement solution that inspires through its sound quality and is also perfectly compatible with the larger E8 and E12 loudspeakers. With the addition of an E12X subwoofer or any other E-Series subwoofer it can also reproduce high level music program. The E6 cabinet has an impact resistant paint finish incorporating a handle. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 6.5″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion 100° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 123 dB\u003c\/li\u003e\n\u003cli\u003eWeight 5 kg \/ 11 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 85 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 120 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) E6 with D12: 123 dB\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) E6 with D6 or E-PAC: 120 dB (SPLmax peak, pink noise test signal with crest factor of 4)\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –11 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 20 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS \/ peak 10 ms): .150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): .100° x 55°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e6.5“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003ecoaxial 1” exit compression driver with 1.75“ coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 5.0 kg (11 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872533221570,"sku":"Z0350-100","price":2550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0350-100.jpg?v=1679469524"},{"product_id":"d-b-audiotechnik-e4-loudspeaker","title":"d\u0026b audiotechnik E4 Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E4 Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E4 is a lightweight 2-way passive loudspeaker using a neodymium LF driver and a coaxially mounted wide dispersion dome tweeter. It offers a wide symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. The E4 is intended for mobile near field applications for speech and music reinforcement in theatres, conferences, industrial presentations, broadcast studios and as surround sound, delay and fill systems. It can be used stand-alone or supplemented by different subwoofers from the E-Series. The highly compact sealed enclosure is injection moulded with an impact resistant black paint finish. The loudspeaker cabinet is weather protected and suitable for outdoor use as standard and is also available with a Special Colour (SC) option.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 4\"\/0.75\"\u003c\/li\u003e\n\u003cli\u003eDispersion 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax 115 dB\u003c\/li\u003e\n\u003cli\u003eWeight 1.1 kg \/ 2.4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 130 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 180 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 114 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 115 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 115 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 16 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 60\/400 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 100° conical\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e4\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e0.75\" dome tweeter coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003etwo pole push terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\n\u003cul\u003e\n\u003cli\u003e150 x 120 x 106 mm\u003c\/li\u003e\n\u003cli\u003e5.9 x 4.72 x 4.2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003e1.1 kg\u003c\/li\u003e\n\u003cli\u003e2.4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAmplifiers:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d20-four-channel-amplifier-1?_pos=5\u0026amp;_sid=2e5472550\u0026amp;_ss=r?variant=47213844562114\"\u003ed\u0026amp;b audiotechnik D20 Amplifiers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d40-amplifier?_pos=1\u0026amp;_sid=49ec1a792\u0026amp;_ss=r?variant=44117189951682\"\u003ed\u0026amp;b audiotechnik D40 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d80-amplifier?_pos=1\u0026amp;_sid=cfa415f71\u0026amp;_ss=r?variant=44536888819906\"\u003ed\u0026amp;b audiotechnik D80 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d25-amplifier?_pos=3\u0026amp;_sid=c7edafb31\u0026amp;_ss=r?variant=45816006344898\"\u003ed\u0026amp;b audiotechnik D25 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d90-amplifier?_pos=1\u0026amp;_sid=218e9ed84\u0026amp;_ss=r?variant=44688466870466\"\u003ed\u0026amp;b audiotechnik D90 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-5d-amplifier?_pos=1\u0026amp;_sid=c13961927\u0026amp;_ss=r?variant=43238286852290\"\u003ed\u0026amp;b audiotechnik 5D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-10d-amplifier?_pos=3\u0026amp;_sid=d023e22f3\u0026amp;_ss=r?variant=45815958798530\"\u003ed\u0026amp;b audiotechnik 10D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-30d-amplifier?_pos=7\u0026amp;_sid=5a32f5368\u0026amp;_ss=r?variant=47239967146178\"\u003ed\u0026amp;b audiotechnik 30D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-40d-amplifier?_pos=15\u0026amp;_sid=a2b99d830\u0026amp;_ss=r?variant=47210048749762\"\u003ed\u0026amp;b audiotechnik 40D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-25d-amplifier?_pos=3\u0026amp;_sid=dfef29007\u0026amp;_ss=r?variant=45815993467074\"\u003ed\u0026amp;b audiotechnik 25D Amplifier \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872535515330,"sku":"Z0440-000","price":860.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0440-000.jpg?v=1679469936"},{"product_id":"d-b-audiotechnik-e5-loudspeaker","title":"d\u0026b audiotechnik E5 Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E5 Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E5 is a lightweight 2-way passive loudspeaker using a ferrite LF driver and a coaxially mounted wide dispersion dome tweeter. It offers a wide symmetrical dispersion pattern in the horizontal and vertical plane, while the cabinet may be mounted in either attitude. The E5 is intended for mobile near field applications for speech and music reinforcement in theatres, conferences, industrial presentations, broadcast studios and as surround sound, delay and fill systems. It can be used stand-alone or supplemented by different subwoofers from the E-Series. The highly compact bass-reflex enclosure is injection moulded with an impact resistant black paint finish. The loudspeaker cabinet is weather protected and suitable for outdoor use as standard and is also available with a Special Colour (SC) option.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 5″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax 117 dB\u003c\/li\u003e\n\u003cli\u003eWeight 2.7 kg \/ 6.0 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard mode): 85 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 130 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) with D6: 116 dB\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field) with D12: 117 dB, (SPLmax peak, pink noise test signal with crest factor 4)\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –6 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 16 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 60\/400 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): 100° conical\u003c\/li\u003e\n\u003cli\u003eComponents: 5“ driver with ferrite magnet\u003c\/li\u003e\n\u003cli\u003e1” dome driver, coaxially mounted\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NL4\u003c\/li\u003e\n\u003cli\u003e1 x two pole push terminal (PT – up to 6 mm2\/AWG 10)\u003c\/li\u003e\n\u003cli\u003ePin assignments: NL4: 1+ \/ 1–\u003c\/li\u003e\n\u003cli\u003ePush terminal: Red: (+) \/ Black: (–)\u003c\/li\u003e\n\u003cli\u003eWeight: 2.7 kg (6.0 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAmplifiers:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d20-four-channel-amplifier-1?_pos=5\u0026amp;_sid=2e5472550\u0026amp;_ss=r?variant=47213844562114\"\u003ed\u0026amp;b audiotechnik D20 Amplifiers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d40-amplifier?_pos=1\u0026amp;_sid=49ec1a792\u0026amp;_ss=r?variant=44117189951682\"\u003ed\u0026amp;b audiotechnik D40 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d80-amplifier?_pos=1\u0026amp;_sid=cfa415f71\u0026amp;_ss=r?variant=44536888819906\"\u003ed\u0026amp;b audiotechnik D80 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d25-amplifier?_pos=3\u0026amp;_sid=c7edafb31\u0026amp;_ss=r?variant=45816006344898\"\u003ed\u0026amp;b audiotechnik D25 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-d90-amplifier?_pos=1\u0026amp;_sid=218e9ed84\u0026amp;_ss=r?variant=44688466870466\"\u003ed\u0026amp;b audiotechnik D90 Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-5d-amplifier?_pos=1\u0026amp;_sid=c13961927\u0026amp;_ss=r?variant=43238286852290\"\u003ed\u0026amp;b audiotechnik 5D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-10d-amplifier?_pos=3\u0026amp;_sid=d023e22f3\u0026amp;_ss=r?variant=45815958798530\"\u003ed\u0026amp;b audiotechnik 10D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-30d-amplifier?_pos=7\u0026amp;_sid=5a32f5368\u0026amp;_ss=r?variant=47239967146178\"\u003ed\u0026amp;b audiotechnik 30D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-40d-amplifier?_pos=15\u0026amp;_sid=a2b99d830\u0026amp;_ss=r?variant=47210048749762\"\u003ed\u0026amp;b audiotechnik 40D Amplifier\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.solotech.com\/en-uk\/products\/d-b-audiotechnik-25d-amplifier?_pos=3\u0026amp;_sid=dfef29007\u0026amp;_ss=r?variant=45815993467074\"\u003ed\u0026amp;b audiotechnik 25D Amplifier \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872537907394,"sku":"Z0450-000","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0450-000.jpg?v=1679470125"},{"product_id":"d-b-audiotechnik-z0601-001-e12-12-inch-nl4-passive-loudspeaker","title":"d\u0026b audiotechnik E12 12-Inch NL4 Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12 12-Inch NL4 Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12″\/1.3″\u003c\/li\u003e\n\u003cli\u003eDispersion 80° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 134 dB\u003c\/li\u003e\n\u003cli\u003eWeight 16 kg \/ 35 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 50 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 100 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field): E12\/E12-D with D6: 131\/130 dB, E12\/E12-D with D12: 134\/133 dB\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –17 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): 80° x 50°, 110° x 50°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003ecoaxial 1.3\" exit compression driver with 3“ coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePin assignments:\n\u003cul\u003e\n\u003cli\u003eNL4: 1+\/1–\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 16 kg (35 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872540856514,"sku":"Z0601-001","price":4990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0601-001.jpg?v=1679470653"},{"product_id":"d-b-audiotechnik-z0601-002-e12-12-inch-nlt4f-m-passive-loudspeaker","title":"d\u0026b audiotechnik E12 12-Inch NLT4F\/M Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12 12-Inch NLT4F\/M Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12″\/1.3″\u003c\/li\u003e\n\u003cli\u003eDispersion 80° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 134 dB\u003c\/li\u003e\n\u003cli\u003eWeight 16 kg \/ 35 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 50 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 100 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field): E12\/E12-D with D6: 131\/130 dB, E12\/E12-D with D12: 134\/133 dB\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –17 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): 80° x 50°, 110° x 50°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003ecoaxial 1.3\" exit compression driver with 3“ coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 16 kg (35 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872543248578,"sku":"Z0601-002","price":4990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0601-002.jpg?v=1679471108"},{"product_id":"d-b-audiotechnik-z0601-100-e12-12-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik E12 12-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12 12-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12″\/1.3″\u003c\/li\u003e\n\u003cli\u003eDispersion 80° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 134 dB\u003c\/li\u003e\n\u003cli\u003eWeight 16 kg \/ 35 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 50 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 100 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field): E12\/E12-D with D6: 131\/130 dB, E12\/E12-D with D12: 134\/133 dB\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –17 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): 80° x 50°, 110° x 50°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003ecoaxial 1.3\" exit compression driver with 3“ coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 16 kg (35 lb)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872545575106,"sku":"Z0601-100","price":5330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0601-100.jpg?v=1679473985"},{"product_id":"d-b-audiotechnik-z0602-001-e12-d-12-inch-nl4-passive-loudspeaker","title":"d\u0026b audiotechnik E12-D 12-Inch NL4 Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12-D 12-Inch NL4 Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options.The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 50 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure\n\u003cul\u003e\n\u003cli\u003ewith 10D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/30D: 133 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: High performance 2-way coaxial loudspeaker with wide dispersion\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 50° rotatable through 50° x 110°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.3\" exit compression driver with 3” coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\n\u003cul\u003e\n\u003cli\u003e580 x 350 x 334 mm\u003c\/li\u003e\n\u003cli\u003e22.8 x 13.8 x 13.2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003e16 kg\u003c\/li\u003e\n\u003cli\u003e35 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872547901634,"sku":"Z0602-001","price":4990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0602-001.jpg?v=1679474219"},{"product_id":"d-b-audiotechnik-z0602-002-e12-d-12-inch-nlt4f-m-passive-loudspeaker","title":"d\u0026b audiotechnik E12-D 12-Inch NLT4F\/M Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12-D 12-Inch NLT4F\/M Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 50 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 100 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field):\n\u003cul\u003e\n\u003cli\u003eE12\/E12-D with D6: 131\/130 dB\u003c\/li\u003e\n\u003cli\u003eE12\/E12-D with D12: 134\/133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –17 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): 80° x 50°, 110° x 50°\u003c\/li\u003e\n\u003cli\u003eComponents: 12“ driver with neodymium magnet coaxial 1.3” exit compression driver with 3“ coil and rotatable CD horn Passive crossover network\u003c\/li\u003e\n\u003cli\u003eConnections:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2 x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eWeight: 16 kg (35 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872550129858,"sku":"Z0602-002","price":4990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0602-002.jpg?v=1679474325"},{"product_id":"d-b-audiotechnik-z0602-100-e12-d-12-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik E12-D 12-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E12-D 12-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eE12-D is high performance multipurpose loudspeakers employing an integrated 12\"\/1.3\" exit coaxial driver design with neodymium magnet and constant directivity horn loading. It is available in two different dispersion versions, the E12 providing a 80° x 50° dispersion pattern (hor. x vert.), the E12-D a wider 110° x 50° pattern. Both horns can easily be rotated through 90° without the use of tools, providing 50° x 80° or 50° x 110° dispersion patterns.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish.\u003c\/p\u003e\n\u003cp\u003eWR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (–5 dB standard): 50 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB CUT mode): 100 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure (1 m, free field):\n\u003cul\u003e\n\u003cli\u003eE12\/E12-D with D6: 131\/130 dB\u003c\/li\u003e\n\u003cli\u003eE12\/E12-D with D12: 134\/133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput level (100 dB-SPL\/1 m): –17 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (hor. x vert.): 80° x 50°, 110° x 50°\u003c\/li\u003e\n\u003cli\u003eComponents: 12“ driver with neodymium magnet coaxial 1.3” exit compression driver with 3“ coil and rotatable CD horn Passive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eConnections\u003c\/span\u003e:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 16 kg (35 lb)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872552620226,"sku":"Z0602-100","price":5330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0602-100.jpg?v=1679486088"},{"product_id":"d-b-audiotechnik-z0610-001-b4-15-inch-12-inch-nl4-dual-passive-subwoofer","title":"d\u0026b audiotechnik B4 15-Inch\/12-Inch NL4 Dual Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik B4 15-Inch\/12-Inch NL4 Dual Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe B4-SUB is an actively driven cardioid subwoofer powered by a single amplifier channel. It houses two long excursion neodymium drivers in an integrated cardioid setup: a 15\" driver in a bass-reflex design facing to the front and a 12\" driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. The B4 subwoofer can only be used in a ground stacked setup. The B4-SUB cabinet is constructed from marine plywood, has an impact and weather resistant paint finish and a pair of handles. An M20 threaded flange in the top panel accepts the d\u0026amp;b Loudspeaker stand winder M20. The loudspeaker cabinet is also available in Special Colour (SC) options.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 15\"\/12\"\u003c\/li\u003e\n\u003cli\u003eDispersion Cardioid\u003c\/li\u003e\n\u003cli\u003eSPLmax 131 dB\u003c\/li\u003e\n\u003cli\u003eWeight 44 kg \/ 97 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 40 - 150 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB 100 Hz mode): 40 - 100 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 128 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/30D: 131 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 131 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Cardioid subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 6 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 500\/2000 W\u003c\/li\u003e\n\u003cli\u003eComponents: 15\" \/ 12\" driver\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NL4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 476 x 580 x 700\/ 800 mm (18.7 x 22.8 x 27.73 \/ 31.6\")\u003c\/li\u003e\n\u003cli\u003eWeight: 44 kg \/ 97 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872554750146,"sku":"Z0610-001","price":5250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0610-001.jpg?v=1679486698"},{"product_id":"d-b-audiotechnik-z0610-002-b4-15-inch-12-inch-nlt4f-m-dual-passive-subwoofer","title":"d\u0026b audiotechnik B4 15-Inch\/12-Inch NLT4F\/M Dual Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik B4 15-Inch\/12-Inch NLT4F\/M Dual Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe B4-SUB is an actively driven cardioid subwoofer powered by a single amplifier channel. It houses two long excursion neodymium drivers in an integrated cardioid setup: a 15\" driver in a bass-reflex design facing to the front and a 12\" driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. The B4 subwoofer can only be used in a ground stacked setup. The B4-SUB cabinet is constructed from marine plywood, has an impact and weather resistant paint finish and a pair of handles. An M20 threaded flange in the top panel accepts the d\u0026amp;b Loudspeaker stand winder M20. The loudspeaker cabinet is also available in Special Colour (SC) options.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is fitted with NLT4 F\/M connectors. All four pins of both connectors are wired in parallel. It uses the pin assignments 2+\/2–. Pins 1+\/1– are designated to TOP cabinets. Using one as the input, the second connector allows for direct connection to a second cabinet.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 15\"\/12\"\u003c\/li\u003e\n\u003cli\u003eDispersion Cardioid\u003c\/li\u003e\n\u003cli\u003eSPLmax 131 dB\u003c\/li\u003e\n\u003cli\u003eWeight 44 kg \/ 97 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 40 - 150 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB 100 Hz mode): 40 - 100 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 128 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/30D: 131 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 131 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Cardioid subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 6 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 500\/2000 W\u003c\/li\u003e\n\u003cli\u003eComponents: 15\" \/ 12\" driver\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 476 x 580 x 700\/ 800 mm (18.7 x 22.8 x 27.73 \/ 31.6\")\u003c\/li\u003e\n\u003cli\u003eWeight: 44 kg \/ 97 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872557076674,"sku":"Z0610-002","price":5250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0610-002.jpg?v=1679487652"},{"product_id":"d-b-audiotechnik-z0615-001-e15x-15-inch-nl4-passive-subwoofer","title":"d\u0026b audiotechnik E15X 15-Inch NL4 Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E15X 15-Inch NL4 Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe E15X-SUB is a compact, lightweight, high performance subwoofer for use with d\u0026amp;b E-Series loudspeakers. The built in passive crossover network allows the E15X-SUB to be operated in parallel to E12 or E12-D loudspeakers on the same amplifier channel, greatly extending the low frequency headroom and bandwidth of the systems. Alternatively it can be operated actively driven by its own amplifier channel without the need for any changes to the subwoofer. In Active mode the E15X-SUB can be used to supplement any of the E-Series cabinets. The E15X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a pair of handles and an M20 threaded flange on the top to accept the d\u0026amp;b loudspeaker stand winder. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eAmplifiers\u003c\/h3\u003e\n\u003cp\u003eWhen the E12-X or E12-DX configuration is selected an E12 or E12-D can be driven passively in parallel with an E15X-SUB from the same amplifier channel.\u003c\/p\u003e\n\u003cp\u003eThe following amplifiers can be used to drive the E15X-SUB.\u003c\/p\u003e\n\u003ch3\u003eMobile\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eD6\u003c\/li\u003e\n\u003cli\u003eD20\u003c\/li\u003e\n\u003cli\u003eD40\u003c\/li\u003e\n\u003cli\u003eD80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10D\u003c\/li\u003e\n\u003cli\u003e30D\u003c\/li\u003e\n\u003cli\u003e40D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eSystem data\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eFrequency response (-5 dB standard)\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e37 - 140 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eFrequency response (-5 dB 100 Hz mode)\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e37 - 100Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eMax. sound pressure[1]\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ewith 10D\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e127 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003ewith D20\/30D\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e130 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003ewith D40\/D80\/40D\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e130 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eCabinets per amplifier channel\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eLoudspeaker data\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eConfiguration\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompact subwoofer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eNominal impedance\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e8 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003ePower handling capacity (RMS\/peak 10 ms)\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e300\/1600 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eComponents\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e15\" driver\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eConnections\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eDimensions \/ weight\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eDimensions (H x W x D)\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e426 x 530 x 550 mm\u003c\/li\u003e\n\u003cli\u003e16.8 x 20.9 x 21.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e24 kg\u003c\/li\u003e\n\u003cli\u003e53 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[1] 1 m, free field, SPL max peak test signal: pink noise with crest factor 4, one speaker driven\u003c\/p\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872559141058,"sku":"Z0615-001","price":3370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0615-001.jpg?v=1679487888"},{"product_id":"d-b-audiotechnik-z0615-002-e15x-15-inch-nlt4f-m-passive-subwoofer","title":"d\u0026b audiotechnik E15X 15-Inch NLT4F\/M Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E15X 15-Inch NLT4F\/M Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe E15X-SUB is a compact, lightweight, high performance subwoofer for use with d\u0026amp;b E-Series loudspeakers. The built in passive crossover network allows the E15X-SUB to be operated in parallel to E12 or E12-D loudspeakers on the same amplifier channel, greatly extending the low frequency headroom and bandwidth of the systems. Alternatively it can be operated actively driven by its own amplifier channel without the need for any changes to the subwoofer. In Active mode the E15X-SUB can be used to supplement any of the E-Series cabinets. The E15X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a pair of handles and an M20 threaded flange on the top to accept the d\u0026amp;b loudspeaker stand winder. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is fitted with NLT4 F\/M connectors. All four pins of both connectors are wired in parallel. It uses the pin assignments 2+\/2–. Pins 1+\/1– are designated to TOP cabinets. Using one as the input, the second connector allows for direct connection to a second cabinet.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 15\"\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPLmax 130 dB\u003c\/li\u003e\n\u003cli\u003eWeight 24 kg \/ 53 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 37Hz – 100Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB 140 Hz mode): 37Hz – 140Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003eD6\/10D: 127dB\u003c\/li\u003e\n\u003cli\u003eD20\/30D: 130dB\u003c\/li\u003e\n\u003cli\u003eD80: 130dB\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohm\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600W\u003c\/li\u003e\n\u003cli\u003eComponents: 15″ drivers\u003c\/li\u003e\n\u003cli\u003eConnections: 2x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions (approx.):\n\u003cul\u003e\n\u003cli\u003eH: 16-13\/16″ (426 mm)\u003c\/li\u003e\n\u003cli\u003eW: 20-15\/16″ (530 mm)\u003c\/li\u003e\n\u003cli\u003eD: 21-11\/16″ (550 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 53 lbs. (24 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872561336514,"sku":"Z0615-002","price":3370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0615-002.jpg?v=1679488245"},{"product_id":"d-b-audiotechnik-z0615-100-e15x-15-inch-passive-subwoofer-weather-resistant","title":"d\u0026b audiotechnik E15X 15-Inch Passive Subwoofer - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E15X 15-Inch Passive Subwoofer - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe E15X-SUB is a compact, lightweight, high performance subwoofer for use with d\u0026amp;b E-Series loudspeakers. The built in passive crossover network allows the E15X-SUB to be operated in parallel to E12 or E12-D loudspeakers on the same amplifier channel, greatly extending the low frequency headroom and bandwidth of the systems. Alternatively it can be operated actively driven by its own amplifier channel without the need for any changes to the subwoofer. In Active mode the E15X-SUB can be used to supplement any of the E-Series cabinets. The E15X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a pair of handles and an M20 threaded flange on the top to accept the d\u0026amp;b loudspeaker stand winder. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 15\"\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPLmax 130 dB\u003c\/li\u003e\n\u003cli\u003eWeight 24 kg \/ 53 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 37Hz – 100Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (–5 dB 140 Hz mode): 37Hz – 140Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003eD6\/10D: 127dB\u003c\/li\u003e\n\u003cli\u003eD20\/30D: 130dB\u003c\/li\u003e\n\u003cli\u003eD80: 130dB\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohm\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600W\u003c\/li\u003e\n\u003cli\u003eComponents: 15″ drivers\u003c\/li\u003e\n\u003cli\u003eConnections: Faston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions (approx.):\n\u003cul\u003e\n\u003cli\u003eH: 16-13\/16″ (426 mm)\u003c\/li\u003e\n\u003cli\u003eW: 20-15\/16″ (530 mm)\u003c\/li\u003e\n\u003cli\u003eD: 21-11\/16″ (550 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 53 lbs. (24 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872564908226,"sku":"Z0615-100","price":3720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0615-100.jpg?v=1679488857"},{"product_id":"d-b-audiotechnik-z0620-001-e8-8-inch-nl4-passive-loudspeaker","title":"d\u0026b audiotechnik E8 8-Inch NL4 Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E8 8-Inch NL4 Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E8 is a high performance 2-way multipurpose loudspeaker, employing an integrated coaxial driver. The E8 can be used for speech and music applications as a stand-alone full range system, or incorporated into larger distributed sound reinforcement situations. With the addition of an E12X subwoofer in passive or active mode or any other E-Series subwoofer, it can also easily reproduce higher level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The 90° x 50° dispersion pattern (h x v) of the horn is easily rotatable through 90° to provide a 50° x 90° dispersion pattern. The E8 cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating a handle and a socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 8″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion: 90° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax: 129 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 7.3 kg \/ 16.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 62 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 120 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 126 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 129 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 129 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 90° x 50° rotatable through 50° x 90°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e8\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1\" exit compression driver with 1.75\" coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NL4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 390 x 232 x 223 mm \/ 15.4 x 9.1 x 8.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 7.3 kg \/ 16.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872567005378,"sku":"Z0620-001","price":3080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0620-001.jpg?v=1679489373"},{"product_id":"d-b-audiotechnik-z0620-002-e8-8-inch-nlt4f-m-passive-loudspeaker","title":"d\u0026b audiotechnik E8 8-Inch NLT4F\/M Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E8 8-Inch NLT4F\/M Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe E8 is a high performance 2-way multipurpose loudspeaker, employing an integrated coaxial driver. The E8 can be used for speech and music applications as a stand-alone full range system, or incorporated into larger distributed sound reinforcement situations. With the addition of an E12X subwoofer in passive or active mode or any other E-Series subwoofer, it can also easily reproduce higher level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The 90° x 50° dispersion pattern (h x v) of the horn is easily rotatable through 90° to provide a 50° x 90° dispersion pattern. The E8 cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating a handle and a socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is fitted with NLT4 F\/M connectors. All four pins of both connectors are wired in parallel. The cabinet uses the pin assignments 1+\/1–. Pins 2+\/2– are designated to actively driven subwoofers. Using one connector as the input, the second connector allows for direct connection to a second cabinet.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 8″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion: 90° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax: 129 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 7.3 kg \/ 16.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 62 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 120 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 126 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 129 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 129 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 90° x 50° rotatable through 50° x 90°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e8\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1\" exit compression driver with 1.75\" coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NLT4 F\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 390 x 232 x 223 mm \/ 15.4 x 9.1 x 8.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 7.3 kg \/ 16.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872569397442,"sku":"Z0620-002","price":3080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0620-002.jpg?v=1679490313"},{"product_id":"d-b-audiotechnik-z0620-100-e8-8-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik E8 8-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik E8 8-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe E8 is a high performance 2-way multipurpose loudspeaker, employing an integrated coaxial driver. The E8 can be used for speech and music applications as a stand-alone full range system, or incorporated into larger distributed sound reinforcement situations. With the addition of an E12X subwoofer in passive or active mode or any other E-Series subwoofer, it can also easily reproduce higher level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The 90° x 50° dispersion pattern (h x v) of the horn is easily rotatable through 90° to provide a 50° x 90° dispersion pattern. The E8 cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating a handle and a socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Color (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 8″\/1″\u003c\/li\u003e\n\u003cli\u003eDispersion: 90° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax: 129 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 7.3 kg \/ 16.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 62 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 120 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 126 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 129 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 129 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 90° x 50° rotatable through 50° x 90°\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e8\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1\" exit compression driver with 1.75\" coil and rotatable CD horn\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections: Faston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 390 x 232 x 223 mm \/ 15.4 x 9.1 x 8.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 7.3 kg \/ 16.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872571855042,"sku":"Z0620-100","price":3300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0620-100.jpg?v=1679491165"},{"product_id":"d-b-audiotechnik-z0631-001-bi8-sub-2x-6-5-inch-passive-subwoofer","title":"d\u0026b audiotechnik Bi8-SUB 2x 6.5-Inch Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik Bi8-SUB 2x 6.5-Inch Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Bi8-SUB is an ultra compact subwoofer that pairs with the established d\u0026amp;b xC, xS and E-Series loudspeakers. The Bi8-SUB is the installation version of the B8 subwoofer and differs only in cabinet construction and mounting hardware. The Bi8-SUB features two 6.5” drivers housed within a bass-reflex cabinet design. Its low height (170 mm) makes it an ideal solution for small scale applications that require an extended low frequency response while still achieving high Sound Pressure Levels. The frequency response extends from 43 Hz to 170 Hz. When operating in 100 Hz mode, the upper operating frequency of the subwoofer is reduced from 170 Hz to 125 Hz.\u003c\/p\u003e\n\u003cp\u003eThe Bi8-SUB can be flown either horizontally or vertically. Two M8 threaded inserts are incorporated, one on each side panel to allow the attachment of a dedicated flying bracket.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The rear panel incorporates two NL4 connectors and a two pole screw terminal block. The Bi8-SUB is also available in Special Colour (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 2 x 6.5\"\u003c\/li\u003e\n\u003cli\u003eDispersion omnidirectional\u003c\/li\u003e\n\u003cli\u003eSPL max 122 dB\u003c\/li\u003e\n\u003cli\u003eWeight 17 kg \/ 37.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 43 Hz - 170 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB 100 Hz mode): 43 Hz - 125 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 120 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/30D: 122 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 122 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Ultra compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 200\/800 W\u003c\/li\u003e\n\u003cli\u003eComponents: 2 x 6.5\" driver with ferrite magnet\u003c\/li\u003e\n\u003cli\u003eConnections: 2 x NL4 M\u003c\/li\u003e\n\u003cli\u003ePin assignment:\n\u003cul\u003e\n\u003cli\u003eNL4 M: 2+\/2–\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 170 x 436 x 580 mm \/ 6.7 x 17.2 x 22.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg \/ 37.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872574247106,"sku":"Z0631-001","price":2230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0631-001.jpg?v=1679494750"},{"product_id":"d-b-audiotechnik-z0631-100-bi8-sub-2x-6-5-inch-passive-subwoofer-weather-resistant","title":"d\u0026b audiotechnik Bi8-SUB 2x 6.5-Inch Passive Subwoofer - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik Bi8-SUB 2x 6.5-Inch Passive Subwoofer - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe Bi8-SUB is an ultra compact subwoofer that pairs with the established d\u0026amp;b xC, xS and E-Series loudspeakers. The Bi8-SUB is the installation version of the B8 subwoofer and differs only in cabinet construction and mounting hardware. The Bi8-SUB features two 6.5” drivers housed within a bass-reflex cabinet design. Its low height (170 mm) makes it an ideal solution for small scale applications that require an extended low frequency response while still achieving high Sound Pressure Levels. The frequency response extends from 43 Hz to 170 Hz. When operating in 100 Hz mode, the upper operating frequency of the subwoofer is reduced from 170 Hz to 125 Hz.\u003c\/p\u003e\n\u003cp\u003eThe Bi8-SUB can be flown either horizontally or vertically. Two M8 threaded inserts are incorporated, one on each side panel to allow the attachment of a dedicated flying bracket.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The rear panel incorporates two NL4 connectors and a two pole screw terminal block. The Bi8-SUB is also available in Special Colour (SC) and Weather Resistant (WR) options. The Weather Resistant option provides an IP55 rating and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 2 x 6.5\"\u003c\/li\u003e\n\u003cli\u003eDispersion omnidirectional\u003c\/li\u003e\n\u003cli\u003eSPL max 122 dB\u003c\/li\u003e\n\u003cli\u003eWeight 17 kg \/ 37.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 43 Hz - 170 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB 100 Hz mode): 43 Hz - 125 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 120 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/30D: 122 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 122 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Ultra compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 200\/800 W\u003c\/li\u003e\n\u003cli\u003eComponents: 2 x 6.5\" driver with ferrite magnet\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 170 x 436 x 580 mm \/ 6.7 x 17.2 x 22.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg \/ 37.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872576639170,"sku":"Z0631-100","price":2540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z0631-100.jpg?v=1679495111"},{"product_id":"d-b-audiotechnik-z1610-000-24s-2x-12-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 24S 2x 12-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 24S 2x 12-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe 24S is a high performance full range 2-way passive loudspeaker housing two 12” drivers in a bass-reflex enclosure with a 1.4” exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The dipolar arrangement of the 12” drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S can be used as a stand-alone, full range system, or supplemented with d\u0026amp;b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d\u0026amp;b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 2 x 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 75° x 45°\u003c\/li\u003e\n\u003cli\u003eSPLmax 138 dB\u003c\/li\u003e\n\u003cli\u003eWeight 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 55 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 90 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith D20\/30D: 138 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 138 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance full range 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 500\/2000 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 45° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e2 x 12“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4” exit compression driver\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e1 x NL4\u003c\/li\u003e\n\u003cli\u003e1 x screw terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 800 x 410 x 420 mm \/ 31.5 x 16 x 16.5”\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872579358914,"sku":"Z1610-000","price":5400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1610-000.jpg?v=1679552712"},{"product_id":"d-b-audiotechnik-z1610-100-24s-2x-12-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 24S 2x 12-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 24S 2x 12-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 24S is a high performance full range 2-way passive loudspeaker housing two 12” drivers in a bass-reflex enclosure with a 1.4” exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The dipolar arrangement of the 12” drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S can be used as a stand-alone, full range system, or supplemented with d\u0026amp;b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d\u0026amp;b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls. The Weather Resistant (WR) option provides an IP55 rating that enables the operation of loudspeakers in changing ambient conditions, and features a fixed cable.\u003c\/p\u003e\n\u003cp\u003eWR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 2 x 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 75° x 45°\u003c\/li\u003e\n\u003cli\u003eSPLmax 138 dB\u003c\/li\u003e\n\u003cli\u003eWeight 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 55 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 90 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith D20\/30D: 138 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 138 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance full range 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 500\/2000 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 45° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e2 x 12“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4” exit compression driver\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 800 x 410 x 420 mm \/ 31.5 x 16 x 16.5”\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872581849282,"sku":"Z1610-100","price":5840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1610-100.jpg?v=1679552946"},{"product_id":"d-b-audiotechnik-z1611-000-24s-d-2x-12-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 24S-D 2x 12-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 24S-D 2x 12-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe 24S-D is a high performance full range 2-way passive loudspeaker housing two 12\" drivers in a bass-reflex enclosure with a 1.4\" exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The 24S-D is the wider horizontal dispersion option of the 24S loudspeaker. The dipolar arrangement of the 12\" drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S-D can be used as a stand-alone, full range system, or supplemented with d\u0026amp;b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d\u0026amp;b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 2 x 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 110° x 45°\u003c\/li\u003e\n\u003cli\u003eSPLmax: 137 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 55 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 90 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith D20\/30D: 137 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 137 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance full range 2-way loudspeaker with wide dispersion\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 500\/2000 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 45° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e2 x 12“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4” exit compression driver\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e1 x NL4\u003c\/li\u003e\n\u003cli\u003e1 x screw terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 800 x 410 x 420 mm \/ 31.5 x 16 x 16.5”\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872584372418,"sku":"Z1611-000","price":5400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1611-000.jpg?v=1679554155"},{"product_id":"d-b-audiotechnik-z1611-100-24s-d-2x-12-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 24S-D 2x 12-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 24S-D 2x 12-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 24S-D is a high performance full range 2-way passive loudspeaker housing two 12\" drivers in a bass-reflex enclosure with a 1.4\" exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The 24S-D is the wider horizontal dispersion option of the 24S loudspeaker. The dipolar arrangement of the 12\" drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S-D can be used as a stand-alone, full range system, or supplemented with d\u0026amp;b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d\u0026amp;b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls. The Weather Resistant (WR) option provides an IP55 rating that enables the operation of loudspeakers in changing ambient conditions, and features a fixed cable.\u003c\/p\u003e\n\u003cp\u003eWR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 2 x 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 110° x 45°\u003c\/li\u003e\n\u003cli\u003eSPLmax: 137 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 55 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 90 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith D20\/30D: 137 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 137 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance full range 2-way loudspeaker with wide dispersion\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 500\/2000 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 45° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e2 x 12“ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4” exit compression driver\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 800 x 410 x 420 mm \/ 31.5 x 16 x 16.5”\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872586567874,"sku":"Z1611-100","price":5840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1611-100.jpg?v=1679554379"},{"product_id":"d-b-audiotechnik-z1613-000-21s-sub-21-inch-passive-subwoofer","title":"d\u0026b audiotechnik 21S-SUB 21-Inch Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 21S-SUB 21-Inch Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe 21S-SUB is a high performance subwoofer for use with the xS-Series and xA-Series loudspeakers and is intended for a wide range of permanently installed applications. The cabinet houses a single long excursion 21\" driver in a bass-reflex design. The large, specially shaped reflex port enables the 21S-SUB to achieve high Sound Pressure Levels from a cabinet with a small footprint. When operated in INFRA mode, the 21S-SUB can be used to complement other d\u0026amp;b subwoofers by extending the frequency response of the system down to 33Hz. The 21S-SUB can be ground stacked or flown in either orientation. It can be flown individually or in a cluster of two cabinets. The enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top, bottom and rear panels each incorporate a pair of M10 threaded inserts for attaching d\u0026amp;b rigging hardware.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 2 x 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 110° x 45°\u003c\/li\u003e\n\u003cli\u003eSPLmax: 137 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 35Hz – 105Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB INFRA mode): 33Hz – 85Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003eD20\/30D amplifier: 134dB\u003c\/li\u003e\n\u003cli\u003eD80 amplifier: 135dB\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation-specific high-performance subwoofer with a compact footprint\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10ms): 650\/2600W\u003c\/li\u003e\n\u003cli\u003eComponents: 21″ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eConnections: Faston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight (H x W x D) (Approx.):\n\u003cul\u003e\n\u003cli\u003eHeight: 43-5\/16″\u003c\/li\u003e\n\u003cli\u003eWidth: 22-13\/16″\u003c\/li\u003e\n\u003cli\u003eDepth: 20-11\/16″\u003c\/li\u003e\n\u003cli\u003eWeight: 119 lb. \/ 54 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872589320386,"sku":"Z1613-000","price":5260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1613-000.jpg?v=1679554869"},{"product_id":"d-b-audiotechnik-z1613-100-21s-sub-21-inch-passive-subwoofer-weather-resistant","title":"d\u0026b audiotechnik 21S-SUB 21-Inch Passive Subwoofer - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 21S-SUB 21-Inch Passive Subwoofer - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 21S-SUB is a high performance subwoofer for use with the xS-Series and xA-Series loudspeakers and is intended for a wide range of permanently installed applications. The cabinet houses a single long excursion 21\" driver in a bass-reflex design. The large, specially shaped reflex port enables the 21S-SUB to achieve high Sound Pressure Levels from a cabinet with a small footprint. When operated in INFRA mode, the 21S-SUB can be used to complement other d\u0026amp;b subwoofers by extending the frequency response of the system down to 33Hz. The 21S-SUB can be ground stacked or flown in either orientation. It can be flown individually or in a cluster of two cabinets. The enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top, bottom and rear panels each incorporate a pair of M10 threaded inserts for attaching d\u0026amp;b rigging hardware. The Weather Resistant (WR) option provides an IP55 rating that enables the operation of loudspeakers in changing ambient conditions, and features a fixed cable.\u003c\/p\u003e\n\u003cp\u003eWR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 2 x 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 110° x 45°\u003c\/li\u003e\n\u003cli\u003eSPLmax: 137 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 33 kg \/ 73 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 35Hz – 105Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB INFRA mode): 33Hz – 85Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003eD20\/30D amplifier: 134dB\u003c\/li\u003e\n\u003cli\u003eD80 amplifier: 135dB\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation-specific high-performance subwoofer with a compact footprint\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10ms): 650\/2600W\u003c\/li\u003e\n\u003cli\u003eComponents: 21″ driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eConnections: Faston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight (H x W x D) (Approx.):\n\u003cul\u003e\n\u003cli\u003eHeight: 43-5\/16″\u003c\/li\u003e\n\u003cli\u003eWidth: 22-13\/16″\u003c\/li\u003e\n\u003cli\u003eDepth: 20-11\/16″\u003c\/li\u003e\n\u003cli\u003eWeight: 119 lb. \/ 54 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872591450306,"sku":"Z1613-100","price":5680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1613-100.jpg?v=1679555128"},{"product_id":"d-b-audiotechnik-z1615-000-4s-4-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 4S 4-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 4S 4-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe 4S is a lightweight 2-way passive loudspeaker housing a neodymium LF driver and coaxially mounted wide dispersion dome tweeter. It employs a 4” driver in a highly compact sealed enclosure and offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. The 4S can be used stand-alone or supplemented by different subwoofers from the xS-Series. The enclosure is injection moulded with an impact and weather resistant (IP34 rating) black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the rear panel are two M8 threaded inserts, two NL4 connectors and a two pole screw terminal block. The loudspeaker cabinet and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours.\u003c\/p\u003e\n\u003cp\u003eSea water resistant (SWR): This option is suitable for outdoor use, especially in wet and acid or salty environments. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 4\"\/0.75\"\u003c\/li\u003e\n\u003cli\u003eDispersion 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax 115 dB\u003c\/li\u003e\n\u003cli\u003eWeight 1 kg \/ 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 130 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB INFRA mode): 180 Hz - 20 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 114 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 115 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 115 dB\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 16 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10ms): 60\/400 W\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e4\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e0.75\" dome tweeter coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\n\u003cul\u003e\n\u003cli\u003e150 x 120 x 102 mm\u003c\/li\u003e\n\u003cli\u003e5.9 x 4.7 x 4.0\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003e1 kg\u003c\/li\u003e\n\u003cli\u003e2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872593940674,"sku":"Z1615-000","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1615-000.jpg?v=1679556410"},{"product_id":"d-b-audiotechnik-z1615-100-4s-4-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 4S 4-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 4S 4-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 4S is a lightweight 2-way passive loudspeaker housing a neodymium LF driver and coaxially mounted wide dispersion dome tweeter. It employs a 4” driver in a highly compact sealed enclosure and offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. The 4S can be used stand-alone or supplemented by different subwoofers from the xS-Series. The enclosure is injection moulded with an impact and weather resistant (IP34 rating) black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the rear panel are two M8 threaded inserts,. The loudspeaker cabinet and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours.\u003c\/p\u003e\n\u003cp\u003eSea water resistant (SWR): This option is suitable for outdoor use, especially in wet and acid or salty environments. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 4\"\/0.75\"\u003c\/li\u003e\n\u003cli\u003eDispersion 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax 115 dB\u003c\/li\u003e\n\u003cli\u003eWeight 1 kg \/ 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 130 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB INFRA mode): 180 Hz - 20 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 114 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 115 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 115 dB\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 16 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10ms): 60\/400 W\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e4\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e0.75\" dome tweeter coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\n\u003cul\u003e\n\u003cli\u003e150 x 120 x 102 mm\u003c\/li\u003e\n\u003cli\u003e5.9 x 4.7 x 4.0\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003e1 kg\u003c\/li\u003e\n\u003cli\u003e2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872596365506,"sku":"Z1615-100","price":790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1615-100.jpg?v=1679556769"},{"product_id":"d-b-audiotechnik-z1616-000-5s-5-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 5S 5-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 5S 5-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe 5S is a lightweight 2-way passive loudspeaker using a ferrite LF driver and a coaxially mounted wide dispersion dome tweeter. It employs a 5” driver in a compact bass-reflex enclosure and offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. It can be used stand-alone or supplemented by different subwoofers of the xS-Series. The enclosure is injection moulded with an impact and weather resistant (IP34 rating) black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the rear panel are two M8 threaded inserts, two NL4 connectors and a two pole screw terminal block. The loudspeaker cabinet and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 5\"\/1\"\u003c\/li\u003e\n\u003cli\u003eDispersion 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax 118 dB\u003c\/li\u003e\n\u003cli\u003eWeight 2.5 kg \/ 5.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 80 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 130 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 117 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 118 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 118 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 16 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 60\/400 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 100° conical\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e5\" driver\u003c\/li\u003e\n\u003cli\u003e1\" dome tweeter coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 240 x 164 x 160 mm \/ 9.4 x 6.5 x 6.3\"\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 kg \/ 5.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872598823106,"sku":"Z1616-000","price":845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1616-000.jpg?v=1679558564"},{"product_id":"d-b-audiotechnik-z1616-100-5s-5-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 5S 5-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 5S 5-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 5S is a lightweight 2-way passive loudspeaker using a ferrite LF driver and a coaxially mounted wide dispersion dome tweeter. It employs a 5” driver in a compact bass-reflex enclosure and offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. It can be used stand-alone or supplemented by different subwoofers of the xS-Series. The enclosure is injection moulded with an impact and weather resistant (IP34 rating) black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the rear panel are two M8 threaded inserts. The loudspeaker cabinet and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours.\u003c\/p\u003e\n\u003cp\u003eSea water resistant (SWR): This option is suitable for outdoor use, especially in wet and acid or salty environments. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 5\"\/1\"\u003c\/li\u003e\n\u003cli\u003eDispersion 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax 118 dB\u003c\/li\u003e\n\u003cli\u003eWeight 2.5 kg \/ 5.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 80 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 130 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 117 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 118 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 118 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 16 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 60\/400 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 100° conical\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e5\" driver\u003c\/li\u003e\n\u003cli\u003e1\" dome tweeter coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 240 x 164 x 160 mm \/ 9.4 x 6.5 x 6.3\"\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 kg \/ 5.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872601542850,"sku":"Z1616-100","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1616-100.jpg?v=1679558818"},{"product_id":"d-b-audiotechnik-z1617-000-8s-8-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 8S 8-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 8S 8-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe 8S is a full range, 2-way loudspeaker in a bass-reflex enclosure, utilizing an 8\"\/1\" coaxial driver combination with a passive crossover. The coaxial design offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. With its frequency response from 70 Hz to 20 kHz the 8S can be used as a full range system and also be supplemented by subwoofers from the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam and the top and bottom panels incorporate an M8 threaded insert. The rear panel incorporates two M8 threaded inserts, two NL4 connectors and a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 8\"\/1\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax: 127 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 7.4 kg \/ 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 70 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 110 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 124 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 127 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 100° conical\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e8\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1\" compression driver coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 352 x 224 x 205 mm \/ 13.9 x 8.8 x 8.1\"\u003c\/li\u003e\n\u003cli\u003eWeight: 7.4 kg \/ 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872606097602,"sku":"Z1617-000","price":1820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1617-000.jpg?v=1679559536"},{"product_id":"d-b-audiotechnik-z1617-100-8s-8-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 8S 8-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 8S 8-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 8S is a full range, 2-way loudspeaker in a bass-reflex enclosure, utilizing an 8\"\/1\" coaxial driver combination with a passive crossover. The coaxial design offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. With its frequency response from 70 Hz to 20 kHz the 8S can be used as a full range system and also be supplemented by subwoofers from the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam and the top and bottom panels incorporate an M8 threaded insert. The rear panel incorporates two M8 threaded inserts. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 8\"\/1\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 100° conical\u003c\/li\u003e\n\u003cli\u003eSPLmax: 127 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 7.4 kg \/ 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 70 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 110 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 124 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 127 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific 2-way compact coaxial loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 150\/800 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 100° conical\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e8\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1\" compression driver coaxially mounted\u003c\/li\u003e\n\u003cli\u003epassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 352 x 224 x 205 mm \/ 13.9 x 8.8 x 8.1\"\u003c\/li\u003e\n\u003cli\u003eWeight: 7.4 kg \/ 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872608555202,"sku":"Z1617-100","price":2090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1617-100.jpg?v=1679559777"},{"product_id":"d-b-audiotechnik-z1618-000-10s-10-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 10S 10-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 10S 10-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 10S\/10S-D are high performance 2-way loudspeakers housing a single 10\" driver in a bass-reflex enclosure and different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from the xS-Series. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts, and the rear panel incorporates two M8 threaded inserts, two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 10\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 130 dB\u003c\/li\u003e\n\u003cli\u003eWeight 13 kg \/ 29 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 60 Hz - 18 kHzz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 130 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 200\/1200 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e10\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4\" compression driver with CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 580 x 283 x 350 mm \/ 22.8 x 11.1 x 13.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 13 kg \/ 129 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872610914498,"sku":"Z1618-000","price":3130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1618-000.jpg?v=1679560136"},{"product_id":"d-b-audiotechnik-z1618-100-10s-10-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 10S 10-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 10S 10-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 10S\/10S-D are high performance 2-way loudspeakers housing a single 10\" driver in a bass-reflex enclosure and different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from the xS-Series. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts, and the rear panel incorporates two M8 threaded inserts. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eCabinets with the weather resistant option (WR) are equipped with a fixed input cable (PG type, H07-RN-F, 2 x 2.5 mm2 (AWG 13), standard length 5.5 m (18 ft).\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 10\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 130 dB\u003c\/li\u003e\n\u003cli\u003eWeight 13 kg \/ 29 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 60 Hz - 18 kHzz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 130 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 200\/1200 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e10\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4\" compression driver with CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 580 x 283 x 350 mm \/ 22.8 x 11.1 x 13.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 13 kg \/ 129 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872613634242,"sku":"Z1618-100","price":3430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1618-100.jpg?v=1679560378"},{"product_id":"d-b-audiotechnik-z1619-000-10s-d-10-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 10S-D 10-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 10S-D 10-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 10S\/10S-D are high performance 2-way loudspeakers housing a single 10\" driver in a bass-reflex enclosure and different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from the xS-Series. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts, and the rear panel incorporates two M8 threaded inserts, two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 10\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 130 dB\u003c\/li\u003e\n\u003cli\u003eWeight 13 kg \/ 29 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 60 Hz - 18 kHzz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 130 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation-specific high-performance 2-way loudspeaker with wide dispersion\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 200\/1200 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e10\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4\" compression driver with CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\u003c\/li\u003e\n\u003cli\u003eH: 22-13\/16″ (638 mm)\u003c\/li\u003e\n\u003cli\u003eW: 11-3\/32″ (338 mm)\u003c\/li\u003e\n\u003cli\u003eD: 13-13\/16″ (365 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 29 lb. (13 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872615928002,"sku":"Z1619-000","price":3130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1619-000.jpg?v=1679561358"},{"product_id":"d-b-audiotechnik-z1619-100-10s-d-10-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 10S-D 10-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 10S-D 10-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 10S\/10S-D are high performance 2-way loudspeakers housing a single 10\" driver in a bass-reflex enclosure and different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from the xS-Series. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts, and the rear panel incorporates two M8 threaded inserts. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eCabinets with the weather resistant option (WR) are equipped with a fixed input cable (PG type, H07-RN-F, 2 x 2.5 mm2 (AWG 13), standard length 5.5 m (18 ft).\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 10\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 130 dB\u003c\/li\u003e\n\u003cli\u003eWeight 13 kg \/ 29 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 60 Hz - 18 kHzz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 127 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 130 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation-specific high-performance 2-way loudspeaker with wide dispersion\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 12 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 200\/1200 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e10\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e1.4\" compression driver with CD horn\u003c\/li\u003e\n\u003cli\u003ePassive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D):\u003c\/li\u003e\n\u003cli\u003eH: 22-13\/16″ (638 mm)\u003c\/li\u003e\n\u003cli\u003eW: 11-3\/32″ (338 mm)\u003c\/li\u003e\n\u003cli\u003eD: 13-13\/16″ (365 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 29 lb. (13 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872618254530,"sku":"Z1619-100","price":3430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1619-100.jpg?v=1679561581"},{"product_id":"d-b-audiotechnik-z1624-000-12s-12-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 12S 12-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 12S 12-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 12S\/12S-D are high performance 2-way loudspeakers that house a single 12” driver in a bass-reflex enclosure and different HF sections for a wide range of installed sound applications. Both versions are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their extended frequency response from 48 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers of the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts and the rear panel incorporates two M8 threaded inserts, two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 133 dB\u003c\/li\u003e\n\u003cli\u003eWeight 17 kg \/ 37 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 48 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 133 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet 1.4\" compression driver with CD horn passive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 638 x 338 x 365 mm \/ 25.1 x 13.3 x 14.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg (37 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872620515522,"sku":"Z1624-000","price":3550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1624-000.jpg?v=1679563145"},{"product_id":"d-b-audiotechnik-z1624-100-12s-12-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 12S 12-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 12S 12-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 12S\/12S-D are high performance 2-way loudspeakers that house a single 12” driver in a bass-reflex enclosure and different HF sections for a wide range of installed sound applications. Both versions are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their extended frequency response from 48 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers of the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts and the rear panel incorporates two M8 threaded inserts. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax 133 dB\u003c\/li\u003e\n\u003cli\u003eWeight 17 kg \/ 37 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 48 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 133 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 75° x 50° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet 1.4\" compression driver with CD horn passive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 638 x 338 x 365 mm \/ 25.1 x 13.3 x 14.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg (37 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872622907586,"sku":"Z1624-100","price":3880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1624-100.jpg?v=1679563740"},{"product_id":"d-b-audiotechnik-z1625-000-12s-d-12-inch-passive-loudspeaker","title":"d\u0026b audiotechnik 12S-D 12-Inch Passive Loudspeaker","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 12S-D 12-Inch Passive Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 12S\/12S-D are high performance 2-way loudspeakers that house a single 12” driver in a bass-reflex enclosure and different HF sections for a wide range of installed sound applications. Both versions are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their extended frequency response from 48 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers of the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts and the rear panel incorporates two M8 threaded inserts, two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax: 133 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg \/ 37 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 48 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 133 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet 1.4\" compression driver with CD horn passive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 638 x 338 x 365 mm \/ 25.1 x 13.3 x 14.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg (37 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872626053314,"sku":"Z1625-000","price":3550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1625-000.jpg?v=1679564336"},{"product_id":"d-b-audiotechnik-z1625-100-12s-d-12-inch-passive-loudspeaker-weather-resistant","title":"d\u0026b audiotechnik 12S-D 12-Inch Passive Loudspeaker - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 12S-D 12-Inch Passive Loudspeaker - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe biaxial 12S\/12S-D are high performance 2-way loudspeakers that house a single 12” driver in a bass-reflex enclosure and different HF sections for a wide range of installed sound applications. Both versions are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their extended frequency response from 48 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers of the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts and the rear panel incorporates two M8 threaded inserts. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents: 12\"\/1.4\"\u003c\/li\u003e\n\u003cli\u003eDispersion: 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eSPLmax: 133 dB\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg \/ 37 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 48 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 100 Hz - 18 kHz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 130 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 133 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 133 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific high performance 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 300\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents:\n\u003cul\u003e\n\u003cli\u003e12\" driver with neodymium magnet 1.4\" compression driver with CD horn passive crossover network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 638 x 338 x 365 mm \/ 25.1 x 13.3 x 14.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17 kg (37 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872628248770,"sku":"Z1625-100","price":3880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1625-100.jpg?v=1679564595"},{"product_id":"d-b-audiotechnik-z1626-000-18s-sub-18-inch-passive-subwoofer","title":"d\u0026b audiotechnik 18S-SUB 18-Inch Passive Subwoofer","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 18S-SUB 18-Inch Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe 18S-SUB is a compact high performance subwoofer for use with the xS-Series and xA-Series loudspeakers. The cabinet houses a long excursion 18\" neodymium driver in a bass-reflex design and it can be used stand-alone, stacked or individually flown. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the side panels are a pair of M10 threaded inserts and into the rear panel are two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 18\"\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPLmax 132 dB\u003c\/li\u003e\n\u003cli\u003eWeight 32 kg \/ 71 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 37 - 140 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 37 - 100 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 129 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 132 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 132 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 400\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents: 18\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003e2 x NL4\u003c\/li\u003e\n\u003cli\u003escrew terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 490 x 580 x 700 mm \/ 19.3 x 22.8 x 27.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 32 kg \/ 71 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872630444226,"sku":"Z1626-000","price":3200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1626-000.jpg?v=1679565666"},{"product_id":"d-b-audiotechnik-z1626-100-18s-sub-18-inch-passive-subwoofer-weather-resistant","title":"d\u0026b audiotechnik 18S-SUB 18-Inch Passive Subwoofer - Weather-Resistant","description":"\u003ch2\u003ed\u0026amp;b audiotechnik 18S-SUB 18-Inch Passive Subwoofer - Weather-Resistant\u003c\/h2\u003e\n\u003cp\u003eThe 18S-SUB is a compact high performance subwoofer for use with the xS-Series and xA-Series loudspeakers. The cabinet houses a long excursion 18\" neodymium driver in a bass-reflex design and it can be used stand-alone, stacked or individually flown. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the side panels are a pair of M10 threaded inserts and into the rear panel are two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.\u003c\/p\u003e\n\u003cp\u003eWeather resistant (WR): This option is suitable for outdoor use. The cabinets have an impact and weather protected black PCP (Polyurea Cabinet Protection) finish. WR cabinets are equipped with a recessed connector panel including a Faston type connector (2 x 6.3 mm, female). A cover plate which accepts single or dual PG cable glands (Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed, as shown in the graphic opposite.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComponents 18\"\u003c\/li\u003e\n\u003cli\u003eDispersion Omni directional\u003c\/li\u003e\n\u003cli\u003eSPLmax 132 dB\u003c\/li\u003e\n\u003cli\u003eWeight 32 kg \/ 71 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem data:\n\u003cul\u003e\n\u003cli\u003eFrequency response (-5 dB standard): 37 - 140 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-5 dB CUT mode): 37 - 100 Hz\u003c\/li\u003e\n\u003cli\u003eMax. sound pressure:\n\u003cul\u003e\n\u003cli\u003ewith 10D: 129 dB\u003c\/li\u003e\n\u003cli\u003ewith D20\/5D\/30D: 132 dB\u003c\/li\u003e\n\u003cli\u003ewith D40\/D80\/40D: 132 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCabinets per amplifier channel: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker data:\n\u003cul\u003e\n\u003cli\u003eConfiguration: Installation specific compact subwoofer\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling capacity (RMS\/peak 10 ms): 400\/1600 W\u003c\/li\u003e\n\u003cli\u003eNominal dispersion angle (h x v): 110° x 55° rotatable\u003c\/li\u003e\n\u003cli\u003eComponents: 18\" driver with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eConnections:\n\u003cul\u003e\n\u003cli\u003eFaston connector type 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions \/ Weight:\n\u003cul\u003e\n\u003cli\u003eDimensions (H x W x D): 490 x 580 x 700 mm \/ 19.3 x 22.8 x 27.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 32 kg \/ 71 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"d\u0026b audiotechnik","offers":[{"title":"New","offer_id":42872633163970,"sku":"Z1626-100","price":3600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/Z1626-100.jpg?v=1679569992"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/collections\/dbaudio-logo-rgb-black.png?v=1768505954","url":"https:\/\/shop.solotech.com\/en-uk\/collections\/d-b-audiotechnik.oembed?page=9","provider":"Solotech","version":"1.0","type":"link"}