{"product_id":"meyer-sound-upq-d2-loudspeaker","title":"Meyer Sound UPQ-D2 Loudspeaker","description":"\u003ch2\u003eMeyer Sound UPQ-D2 Full-Size Loudspeaker UPQ-D2: Narrow Coverage\u003c\/h2\u003e\n\u003cp\u003eThe UPQ-D2 offers a focused beamwidth, which yields precise coverage and minimal interaction with walls and neighboring loudspeakers in arrays. This feature makes it an ideal solution for small to mid-sized venues, houses of worship, theaters, and nightclubs—as either a stand-alone loudspeaker or as part of an array. The Constant-Q horn’s smooth and accurate performance, the result of meticulous research in Meyer Sound’s anechoic chamber, exhibits a remarkably consistent beamwidth in both the horizontal and vertical planes across a wide frequency range of 1–18 kHz. The UPQ‑D2 horn also delivers uniform attenuation for all frequencies outside the specified beamwidth.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWide horizontal pattern covers broad listening areas and focused vertical pattern allows precise coverage\u003c\/li\u003e\n\u003cli\u003eHighly energy efficient amplifier with sophisticated digital signal processing that provides extraordinarily flat amplitude and phase response for tonal accuracy and precise imaging\u003c\/li\u003e\n\u003cli\u003eIntegral stand mount and QuickFly mounting options facilitate rigging\u003c\/li\u003e\n\u003cli\u003eConstant-Q horn affords uniform response throughout coverage area\u003c\/li\u003e\n\u003cli\u003eExceptional size to power ratio provides application flexibility\u003c\/li\u003e\n\u003cli\u003eConsistent and predictable performance ensures accurate system design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAcoustical:\n\u003cul\u003e\n\u003cli\u003eOperating Frequency Range: 55 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 58 Hz – 18 kHz ±4 dB\u003c\/li\u003e\n\u003cli\u003ePhase Response: 80 Hz – 18 kHz ±45°\u003c\/li\u003e\n\u003cli\u003eLinear Peak SPL: 138 dB with 19 dB crest factor (M-noise), 134.5 dB (Pink noise), 137 dB (B-noise)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoverage:\n\u003cul\u003e\n\u003cli\u003eHorizontal Coverage: 50° horizontal x 50° vertical (-6 dB)\u003c\/li\u003e\n\u003cli\u003eVertical Coverage: 60° horizontal x 60° vertical (-10 dB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransducers:\n\u003cul\u003e\n\u003cli\u003eLow Frequency: One high-power 15-inch cone driver with neodymium magnet; 2 Ω nominal impedance\u003c\/li\u003e\n\u003cli\u003eHigh Frequency: One 4-inch diaphragm compression driver; 8 Ω nominal impedance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Input:\n\u003cul\u003e\n\u003cli\u003eType: Differential, electronically balanced\u003c\/li\u003e\n\u003cli\u003eMaximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection\u003c\/li\u003e\n\u003cli\u003eConnectors: 5-pin XLR connectors to accommodate both balanced audio and RMS signals\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 10 kΩ differential between pins 2 and 3\u003c\/li\u003e\n\u003cli\u003eWiring:\n\u003cul\u003e\n\u003cli\u003ePin 1: Chassis\/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies\u003c\/li\u003e\n\u003cli\u003ePin 2: Signal +\u003c\/li\u003e\n\u003cli\u003ePin 3: Signal -\u003c\/li\u003e\n\u003cli\u003ePin 4: RMS (polarity insensitive)\u003c\/li\u003e\n\u003cli\u003ePin 5: RMS (polarity insensitive)\u003c\/li\u003e\n\u003cli\u003eCase: Earth ground and chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eNominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music\u003c\/li\u003e\n\u003cli\u003eInput Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmplifier:\n\u003cul\u003e\n\u003cli\u003eType: Two-channel, Class-D\u003c\/li\u003e\n\u003cli\u003eTotal Output Power: 2250 W peak\u003c\/li\u003e\n\u003cli\u003eTHD, IM, TIM: \u0026lt; 0.02%\u003c\/li\u003e\n\u003cli\u003eCooling: Convection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC Power:\n\u003cul\u003e\n\u003cli\u003eConnectors: PowerCON 20 input with loop output\u003c\/li\u003e\n\u003cli\u003eAutomatic Voltage Selection: 90–265 V AC, 50–60 Hz\u003c\/li\u003e\n\u003cli\u003eSafety Rated Voltage Range: 100–240 V AC, 50–60 Hz\u003c\/li\u003e\n\u003cli\u003eTurn-on and Turn-off Points: 90 V AC turn-on; no turn-off; internal fuse-protection above 265 V AC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent Draw:\n\u003cul\u003e\n\u003cli\u003eIdle Current: 0.27 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC)\u003c\/li\u003e\n\u003cli\u003eMaximum Long-Term Continuous Current (\u0026gt;10 sec): 2.0 A rms (115 V AC); 1.0 A rms (230 V AC); 2.3 A rms (100 V AC)\u003c\/li\u003e\n\u003cli\u003eBurst Current (\u0026lt;1 sec): 3.6 A rms (115 V AC); 1.8 A rms (230 V AC); 4.1 A rms (100 V AC)\u003c\/li\u003e\n\u003cli\u003eMaximum Instantaneous Peak Current: 7.8 A pk (115 V AC); 4.0 A pk (230 V AC); 9.1 A pk (100 V AC)\u003c\/li\u003e\n\u003cli\u003eInrush Current: \u0026lt; 20 A peak\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical:\n\u003cul\u003e\n\u003cli\u003eDimensions: W: 19.00 in (483 mm) x H: 28.15 in (715 mm) x D: 18.18 in (462 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 95 lb (43 kg)\u003c\/li\u003e\n\u003cli\u003eEnclosure: Premium multi-ply birch with slightly textured black finish\u003c\/li\u003e\n\u003cli\u003eProtective Grille: Powder-coated, hex-stamped steel with black mesh\u003c\/li\u003e\n\u003cli\u003eRigging: Aluminum end plates on top and bottom with metric M10 threaded points; integral 1.5-inch (38 mm) pole mount receptacle on bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Meyer Sound","offers":[{"title":"New","offer_id":42320044359874,"sku":"UPQ-D2-STD-5XLR","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/2631\/5568\/products\/UPQ-D2-STD-5XLR.jpg?v=1661882705","url":"https:\/\/shop.solotech.com\/en-ca\/products\/meyer-sound-upq-d2-loudspeaker","provider":"Solotech","version":"1.0","type":"link"}