RME 12MIC 12-Channel Digitally Controlled High-End Microphone Preamp with MADI and AVB

The RME 12Mic is a twelve channel remote controllable microphone preamplifier with no-compromise A/D conversion, integrated AVB and MADI connectivity, and a multitude of features designed to make it a perfect companion for any professional recording.

Features:

1 x Phones Output
4 x XLR/TRS Mic/Inst/Line
8 x XLR Mic/Line
Redundant PSU (optional)
1 x Word Clock I/O
1 x MADI I/O coaxial
3 x ADAT Out
1 x MADI Optical SFP (optional)
2 x Gigabit Ethernet (802.3 compliant)
SteadyClock FS
USB for firmware & remote control

Specifications:

Inputs:
- XLR In 1-12:
  - Input: XLR, electronically balanced
  - Input impedance: 3.4 kOhm
  - Gain range: 75 dB, 1 dB steps
  - Resolution AD: 24 bit
  - Frequency response @ 44.1 kHz, -0.1 dB: 8 Hz – 20.8 kHz
  - Frequency response @ 96 kHz, -0.5 dB: 4 Hz – 29.2
  - Frequency response @ 192 kHz, -1 dB: 3 Hz – 43.7
  - THD @ 30 dB gain: < -110 dB, < 0.00032 %
  - THD+N @ 30 dB gain: < -104 dB, < 0.00063 %
  - Channel separation: > 110 dB
  - Signal to Noise ratio (SNR): > 117 dB RMS unweighted, > 120 dB(A)
  - Equivalent Input Noise (EIN), 30 dB Gain: 123 dB RMS unweighted, 125.5 dB(A) @ 150 Ohm
  - Maximum input level, Gain 0 dB: +18 dBu
  - Maximum input level, Gain 75 dB: -57 dBu
- TRS In 1-4 (As above, but):
  - Signal to Noise ratio (SNR): 115 dB RMS unweighted, 118 dBA
  - TRS jack, balanced
  - Gain range: 42 dB, 1 dB steps
  - Maximum input level, Gain 8 dB: +20 dBu
  - Maximum input level, Gain 50 dB: -22 dBu
  - Switchable high impedance (unbalanced TS): 1 MOhm
- MADI:
  - Coaxial via BNC, 75 Ohm, according to AES10-1991
  - Optical via optional SFP module
  - 62.5/125 and 50/125 compatible
  - Accepts 56 channel and 64 channel mode, plus 96k Frame
  - Single Speed: up to 64 channels 24 bit 48 kHz
  - Double Speed: up to 32 channels 24 bit 96 kHz
  - Quad Speed: up to 16 channels 24 bit 192 kHz
- Word Clock:
  - 75 ohm Word Clock BNC connectivity
  - Support 44.1kHz - 192kHz
  - Support full or single speed operation
  - SteadyClock FS extracts low jitter clock signal
  - Intelligent Clock Control switches clock source seamlessly
- ADAT:
  - 3 x TOSLINK
  - Quad Speed (S/MUX4): 1 x 2 channels 24 bit 192 kHz
Outputs:
- Phones 1/2:
  - Resolution: 24 Bit
  - Noise (DR): 115 dB RMS unweighted, 118 dBA
  - Frequency response @ 44.1 kHz, -0.5 dB: 9 Hz – 22 kHz
  - Frequency response @ 96 kHz, -0.5 dB: 9 Hz – 45 kHz
  - Frequency response @ 192 kHz, -1 dB: 8 Hz - 75 kHz
  - THD+N: < -100 dB, < 0.001 %
  - Channel separation: > 110 dB
  - Output: 6.3 mm TRS stereo (unbalanced) or mono (balanced) jack
  - Maximum output level at 0 dBFS: +13 dBu (unbalanced), +19 dBu (balanced)
- MADI:
  - Coaxial via BNC, 75 Ohm, according to AES10-1991
  - Optical via optional SFP module
  - 62.5/125 and 50/125 compatible
  - Accepts 56 channel and 64 channel mode, plus 96k Frame
  - Single Speed: up to 64 channels 24 bit 48 kHz
  - Double Speed: up to 32 channels 24 bit 96 kHz
  - Quad Speed: up to 16 channels 24 bit 192 kHz
- Word Clock:
  - 75 ohm Word Clock BNC connectivity
  - Support 44.1kHz - 192kHz
  - Support full or single speed operation
  - SteadyClock FS extracts low jitter clock signal
  - Intelligent Clock Control switches clock source seamlessly
General:
- 2x RJ45 1 GigE AVB, 8 streams (each up to 16 ch.) per direction with redundancy
- MADI input redundancy (requires optional SFP module)
- Internal routing of up to 268x282 channels
- 19” enclosure 1 unit height
- 1,54” full color display with control knob and four buttons for convenient, direct access to all features
- SteadyClock FS - ultra-low jitter digital clock technology
- Remote control via HTTP, JSON, IEEE 1722.1 ATDECC, MIDI over MADI
- internal PSU, optional 12V DC redundant power supply
- USB 2.0 (for remote control and firmware updates)
- DC-coupled outputs
Hardware:
- Dimensions: 440 x 44 x 243 mm (17.3 x 1.7 x 9.6 inches)
- Weight: 2.8 kg (6.2 lbs)
- Package: 560 x 315 x 115 mm (22.1 x 12.4 x 4.5 inches)
- Conformity: CE, FCC, WEEE, RoHS
- Power supply: internal 30 W 100-240 V AC, external 12 V 2.5 A DC (optional)
- Power consumption: typ. 20 W, standby 0.5W

Contact us

Collection: Mic Preamps

Filter and sort

Filter

PreSonus TUBEPRE V2 Mono Tube Preamp 1/3U

Warm Audio WA12 MKII Mic Preamp/DI

RME 12MIC 12-Channel Digitally Controlled High-End Microphone Preamp with MADI and AVB